Evaluation of soil-erosion and pesticide-exposure control strategies

A linear-programming model of agriculture in the Chowan-Pasquotank river basin of North Carolina is used to analyze soil-erosion reduction strategies while holding pesticide loadings constant. Two forms of pesticide-exposure indexes, reflecting terrestrial and aquatic exposure, are used to aggregate the effects of pesticide applications for no-till and conventional till systems. Reductions in pesticide exposure are compatible with high levels of erosion control. Greater reductions of pesticide exposure with comparable levels of erosion control are achievable at relatively low cost. Such reductions imply shifts in cropping patterns and resource use, however.     

Western Land Managers will Need all Available Tools for Adapting to Climate Change,Including Grazing: A Critique of Beschta et al.

In a previous article, Beschta et al. (Environ Manag 51(2):474–491, 2013) argue that grazing by large ungulates (both native and domestic) should be eliminated or greatly reduced on western public lands to reduce potential climate change impacts. The authors did not present a balanced synthesis of the scientific literature, and their publication is more of an opinion article. Their conclusions do not reflect the complexities associated with herbivore grazing. Because grazing is a complex ecological process, synthesis of the scientific literature can be a challenge. Legacy effects of uncontrolled grazing during the homestead era further complicate analysis of current grazing impacts. Interactions of climate change and grazing will depend on the specific situation. For example, increasing atmospheric CO₂ and temperatures may increase accumulation of fine fuels (primarily grasses) and thus increase wildfire risk. Prescribed grazing by livestock is one of the few management tools available for reducing fine fuel accumulation. While there are certainly points on the landscape where herbivore impacts can be identified, there are also vast grazed areas where impacts are minimal. Broad scale reduction of domestic and wild herbivores to help native plant communities cope with climate change will be unnecessary because over the past 20–50 years land managers have actively sought to bring populations of native and domestic herbivores in balance with the potential of vegetation and soils. To cope with a changing climate, land managers will need access to all available vegetation management tools, including grazing.     

GRAZED STUBBLE HEIGHT AS A CRITERION FOR CONTROLLING SEDIMENT PRODUCTION FROM GRAZING LANDS1

ABSTRACT: Efforts by state and federal agencies to develop standards and guidelines for protecting and enhancing water quality on grazing lands have led to suggestions that grazed stubble height criteria could be used to determine when cattle should be removed from a specific pasture or grazing area. Until recently only indirect scientific evidence from agronomy and laboratory studies gave support to the stubble height concept. Consequently, a grazing study was initiated on a Montana ranch in 1997 to determine the reduction in overland sediment achieved by grazing a pasture to a predetermined stubble height. Treatments consisted of 7 cm (3 in) grazed, 7 cm (3 in) clipped or mowed, 15 cm (6 in) grazed; 15 cm (6 in) clipped and untreated or natural forage plant height. The five treatments were used in a two‐year trial spanning 1997 to 1999. At the conclusion of this study the magnitude of sediment production was related to the number of intense rain events during the March through June period rather than total precipitation. There was a significant year effect in terms of sediment accumulation (P < 0.01) but no year by treatment effect (P = 0.11). Even though a significant difference in sediment accumulation was detected between the shorter and taller stubble heights (P = 0.04) in both 1998 and 1999, the difference could not be explained by grazed stubble height alone. Close grazing (7 cm stubble) consistently ranked lowest in sediment production (P < 0.01) among all treatments, including the ungrazed control. These results suggest that changes in plant community structure and microtopographic caused by grazing influence sediment entrapment (retention) on hillslopes more than those caused by plant height.     

Interaction between electrostatics and fluid dynamics in electrostatic precipitators

Significant effort has been devoted by past researchers in electrostatic precipitators to electrostatics and particle chemistry. Relatively little, however, has been published on the effect of turbulent flow and its interaction with electrostatics and particle dynamics. This paper describes an experiment and a fundamental model which is focused on the coupled effects of the fluid dynamics and electrostatics.A laboratory precipitator flow facility with laser beam illumination was used to visualize smoke flow. Detailed photographs of flow patterns with and without electric field were recorded in a horizontal plane through the precipitator.A theoretical model was used to numerically simulate the observed flow patterns in the experiment. In the model the flow was described by time-averaged mass and momentum equations with a two-equation turbulence model. The electric field was described by Maxwell electrostatic equation and the continuity of the current equation. The system of the coupled partial differential equations was solved by a finite difference scheme.The interaction between fluid dynamics and electrostatics is shown to have a significant role in altering the flow in the precipitator. The practical implication is that the interaction will aid in particle migration in some regions, but it will increase reentrainment and reduce particle migration in others. Comparison between the results from the experiment and numerical computations shows good qualitative agreement between the two. Since both the electrostatic and the fluid dynamic flow fields depend on the electrode geometry, further investigation may lead to improved design of precipitators.     

Experimental investigation of the machining induced residual stress tensor under mechanical loading

Residual stress induced by machining is complex and difficult to predict, since it involves mechanical loads, temperature gradients or phase transformation in the generation mechanism. In this work, an experiment with a statistical design for the residual stress tensor was performed to investigate the residual stress profile on a machined surface. In order to understand the generation mechanism of residual stress in machining, three variables and workpiece materials were carefully selected to focus on the mechanical loads and avoid the temperature gradients and phase transformation on the machined surface. The mechanical loads considered here included the chip formation force at the primary shear zone and the plowing force at the tool tip–workpiece contact. Depths of cut and rake angles were selected to alter the chip formation force, and the tool tip radius was designed to emphasize the plowing effect. The workpiece material was aluminum 3003. The experimental results showed that the chip formation force provides basic shapes of the residual stress profile for a machined surface. It decides the depth of the peak residual stress below the surface. However, the plowing force was the dominating effect on the surface residual stress, causing high stresses on the surface. The plowing force can shift the surface stress from tensile to compressive. Additionally, the measured stress tensor proved that in-plane shear stress exists for the machined surface.     

Modeling Watershed‐Wide Bioretention Stormwater Retrofits to Achieve Thermal Pollution Mitigation Goals

Stream ecosystems are increasingly at risk for thermal impairment as urbanization intensifies, resulting in more heated runoff from impervious cover that is less likely to be cooled naturally. While several best management practices, including bioretention filters, have been able to reduce thermal pollution, success has been limited. The extent of thermal mitigation required to prevent ecological damage remains unknown. A calibrated runoff temperature model of a case study watershed in Blacksburg, VA was developed to determine the cumulative treatment volume of bioretention filters required to reduce thermal impacts caused by runoff from development in the watershed to regulated biologically acceptable levels. A future build out scenario of the study watershed was also analyzed. Results from this study established that runoff thermal pollution cannot be fully reduced to goal thresholds during all storms using bioretention filter retrofits. While retrofitting significantly decreased temperatures and heat exports relative to the controls, increasing treatment volumes did not really enhance mitigation. Alternate thermal mitigation methods that actively remove runoff volume should be considered where more thermal mitigation is required.     

Evolution and Application of Urban Watershed Management Planning

The development of Watershed Management Plans (WMPs) in urban areas aids municipalities in allocating resources, engaging the public and stakeholders, addressing water quality regulations, and mitigating issues related to stormwater runoff and flooding. In this study, 124 urban WMPs across the United States were reviewed to characterize historic approaches and identify emerging trends in watershed planning. Planning methods and tools were qualitatively evaluated, followed by statistical analyses of a subset of 63 WMPs to identify relationships between planning factors. Plans developed by a municipality or consultant were associated with more occurrences of hydrologic modeling and site‐specific recommendations, and fewer occurrences of characterizing social watershed factors, than plans authored by agencies, organizations, or universities. WMPs in the past decade exhibited greater frequency in the use of pollutant load models and spatially explicit hydrologic and hydraulic models. Project prioritization was found to increasingly focus on feasibility to implement proposed strategies. More recent plans additionally exhibited greater consideration for water quality, ecological health, and public participation. Innovation in planning methods and consideration of future watershed conditions are primary areas that were found to be deficient in the study WMPs, although analysis methods and tools continue to improve in the wake of advancing technology and data availability.     

Scenario‐Based Evaluation of Commercially Available Cleaning Robots for Collection of Bacillus Spores from Environmental Surfaces

The cleaning robots, a vacuum‐based robot (R2) and a wetted‐wipe‐based robot (R4), were evaluated in this study to determine their effectiveness for sampling Bacillus atrophaeus spores. The tests were designed to evaluate the benefit of robot sampling on large areas with two different contamination scenarios: a high‐concentration, low spatial extent contamination (hot spot) and a low concentration, high spatial extent contamination (widely dispersed). The hot spot tests were conducted with the high spore contamination (approximately 10⁷ colony forming units [CFUs]) on a limited area (30.5 cm × 30.5 cm), 2 percent of the entire test. The widely dispersed tests were conducted with approximately 0.1 CFUs/cm² for floor laminate and approximately 10 CFUs/cm² for carpet surfaces. The widely dispersed tests distributed spores across the test surface and covered approximately 40 percent of the entire test area. The test results showed that both robots successfully sampled a large quantity of spores from carpet and floor laminate surfaces for both test scenarios. Robot performance is discussed in the context of currently used surface sampling methods. © 2014 Wiley Periodicals, Inc.*