Establishing ecological networks for habitat conservation in the case of ?e?me�CUrla Peninsula, Turkey

The study involves the Çe?me?CUrla Peninsula, where habitat fragmentation and loss, which threaten biological diversity, have become an urgent matter of concern in recent decades. The study area has been subjected to anthropogenic pressures and alterations due to ongoing and impending land uses. Therefore, ecological networks, as an appropriate way to deal with habitat fragmentation and loss and to improve ecological quality, were identified in the study area as one of the early attempts in the country to maintain its rich biodiversity. In this sense, core areas and ecological linkages as primary components of ecological networks were established on the basis of sustaining natural habitats. A GIS-based model was created to identify core areas and to facilitate the ecological connectivity. The modeling process for core areas and corridors combined 14 and 21 different variables, respectively. The variables were used as environmental inputs in the model, and all analyses were materialized in ArcGIS 9.2 using grid functions of image analysis and spatial analyst modules. As a result, six core areas and 36 corridor alternatives were materialized. Furthermore, some recommendations for the implementation and management of the proposed ecological networks were revealed and discussed.     

Effects of noise pollution over the blood serum immunoglobulins and auditory system on the VFM airport workers, Van, Turkey

Noise pollution is a common health problem for developing countries. Especially highways and airports lead to noise pollution in different levels and in many frequencies. In this study, we focused on the effect of noise pollution in airports. This work aimed measurements of noise pollution levels in Van Ferit Melen (VFM) airport and effect of noise pollution over the immunoglobulin A, G, and M changes among VFM airport workers in Turkey. It was seen that apron and terminal workers were exposed to high noise (>80 dB(A)) without any protective precautions. Noise-induced temporary threshold shifts and noise-induced permanent threshold shifts were detected between the apron workers (p?<?0.001) and terminal workers (p?<?0.005). IgA values of apron terminal and control group workers were approximately the same in the morning and increased in a linear manner during the day. This increase was statistically significant (p?<?0.001). IgG and IgM values of apron, terminal, and control group workers were approximately same in the morning. Apron and terminal workers IgG and IgM levels were increased until noon and then decreased until evening as compare to control group, but these changes were not statically significant (p?>?0.05). These findings suggested that the noise pollution in the VFM airport could lead to hearing loss and changes in blood serum immunoglobulin levels of airport workers. Blood serum immunoglobulin changes might be due to vibrational effects of noise pollution. Airport workers should apply protective precautions against effect of noise pollution in the VFM airport.     

Fate of selected pharmaceuticals in hospital and municipal wastewater effluent: occurrence,removal, and environmental risk assessment

The concentrations and distribution of β-blockers, lipid regulators, and psychiatric and cancer drugs in the influent and effluent of the municipal wastewater treatment plant (WWTP) and the effluent of 16 hospitals that discharge into the wastewater treatment plant mentioned in this study at two sampling dates in summer and winter were examined. The pharmaceutical contribution of hospitals to municipal wastewater was determined. The removal of target pharmaceuticals was evaluated in a WWTP consisting of conventional biological treatment using activated sludge. Additionally, the potential environmental risk for the aquatic receiving environments (salt lake) was assessed. Beta-blockers and psychiatric drugs were detected in high concentrations in the wastewater samples. Atenolol (919 ng/L) from β-blockers and carbamazepine (7008 ng/L) from psychiatric pharmaceuticals were detected at the highest concentrations in hospital wastewater. The total pharmaceutical concentration determined at the WWTP influent and effluent was between 335 and 737 ng/L in summer and between 174 and 226 ng/L in winter. The concentrations detected in hospital effluents are higher than the concentrations detected in WWTP. The total pharmaceutical contributions from hospitals to the WWTP in summer and winter were determined to be 2% and 4%, respectively. Total pharmaceutical removal in the WWTP ranged from 23 to 54%. According to the risk ratios, atenolol could pose a high risk (risk quotient > 10) for fish in summer and winter. There are different reasons for the increase in pharmaceutical consumption in recent years. One of these reasons is the COVID-19 pandemic, which has been going on for 2 years. In particular, hospitals were operated at full capacity during the pandemic, and the occurrence and concentration of pharmaceuticals used for the therapy of COVID-19 patients has increased in hospital effluent. Pandemic conditions have increased the tendency of people to use psychiatric drugs. It is thought that beta-blocker consumption has increased due to cardiovascular diseases caused by COVID-19. Therefore, the environmental risk of pharmaceuticals for aquatic organisms in hospital effluent should be monitored and evaluated.

     

UV-C light-enhanced photo-Fenton oxidation of methyl parathion

The photodegradation of aqueous solutions containing 0.2 mM methyl parathion has been studied through the optimization of the [H₂O₂]/[Fe³⁺] ratio in a Fe³⁺/H₂O₂/UV-C flow system of 1.3 L capacity. The decay kinetics and TOC abatement have been analyzed for the experiments performed at pH 3.0 and room temperature. All experiments lead to the total methyl parathion destruction after a few minutes, following a pseudo-first-order decay kinetics. Total mineralization can be reached after 120 min at the optimum ratio found, due to the synergistic effect of the very oxidizing hydroxyl radical (^·OH) produced via the Fenton reagent and the effective photodecarboxylation at 253.7 nm.     

Antimicrobial Activity of the Chitosan Extracted from Metapenaeus stebbingi Shell Wastes

In the study, chitosan chemically extracted from Metapenaeus stebbingi shells obtained from shrimp processing factories and commercial chitosan were used as antimicrobial materials. Antimicrobial activities of the chitosans dissolved in acetic, lactic, formic and hydrochloric acid at different concentrations (1.00, 0.50, 0.25, 0.10 and 0.05%) were tested in vitro by using the disk diffusion method with standard microorganisms (Pseudomonas putida, Pseudomonas fluorescens, Vibrio parahaemolyticus, Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli 1, Escherichia coli 2, Listeria monocytogenes, Enterecoccus faecalis, Aeromonas caviae). On the other hand, gentamicin was used as positive control. Antimicrobial test results indicated that chitosan demonstrated different effects depending on the chitosan concentration, solvent material and bacteria type. In the present study, both the extracted and commercial chitosans were observed to have antimicrobial effects on nearly all types of the bacteria.     

Elimination of radiocontrast agent diatrizoic acid by photo-Fenton process and enhanced treatment by coupling with electro-Fenton process

The removal of radiocontrast agent diatrizoic acid (DIA) from water was performed using photo-Fenton (PF) process. First, the effect of H₂O₂ dosage on mineralization efficiency was determined using ultraviolet (UV) irradiation. The system reached a maximum mineralization degree of 60 % total organic carbon (TOC) removal at 4 h with 20 mM initial H₂O₂ concentration while further concentration values led to a decrease in TOC abatement efficiency. Then, the effect of different concentrations of Fenton’s reagents was studied for homogeneous Fenton process. Obtained results revealed that 0.25 mM Fe³⁺ and 20 mM H₂O₂ were the best conditions, achieving 80 % TOC removal efficiency at 4 h treatment. Furthermore, heterogeneous PF treatment was developed using iron-activated carbon as catalyst. It was demonstrated that this catalyst is a promising option, reaching 67 % of TOC removal within 4 h treatment without formation of iron leachate in the medium. In addition, two strategies of enhancement for process efficiency are proposed: coupling of PF with electro-Fenton (EF) process in two ways: photoelectro-Fenton (PEF) or PF followed by EF (PF-EF) treatments, achieving in both cases the complete mineralization of DIA solution within only 2 h. Finally, the Microtox tests revealed the formation of more toxic compounds than the initial DIA during PF process, while, it was possible to reach total mineralization by both proposed alternatives (PEF or PF-EF) and thus to remove the toxicity of DIA solution.     

Strength and durability characterization of pelletized coal–biomass household briquettes

Increase in waste sludge disposal is always seen as a problem from the point of production industry. However, it is clear that the reuse and recycle of sewage sludge could be a serious economic input. The most important action should be to determine the sludge characterizations and direct the producers towards appropriate reuse and recycling opportunities. In this study, reuse method was examined to produce coal briquette, which will constitute an example for waste sludge. In order to make use of the waste sludge, five different coal briquette samples were produced by mixing powdered coal and bitumen together with waste sludge, at different ratios. The overall results indicated that the sample named CB3 having 70% powdered coal, 20% waste sludge, and 10% bitumen was found to be the optimum coal briquette among the other samples produced. The proximate analysis of the optimum briquette sample was carried out according to the Turkish standards and regulations and it was found out that the produced briquette coal can have commercial value with a gross calorific value of 30.03 MJ/kg and 7.30% ash content.     

Energy and exergy analysis of a heat storage tank with a novel eutectic phase change material layer of a solar heater system

Solar energy is one of the most important renewable energy sources, but it is not available every time and every season. Thus, storing of solar energy is important. One of the popular methods of heat storage is use of phase change materials (PCMs) which have large thermal energy storage capacity. In this study, the heat storage tank in a domestic solar water heating system was chosen as control volume. The experiments were performed in the province of Elaz?g, Turkey, in November when solar radiation was weak due to cloudy sky. The heat storage tank of the system was modified to fill PCM between insulation and hot water part. A few PCMs which are Potassium Fluoride, Lithium Metaborate Dihydrate, Strontium Hydroxide Octahydrate, Barium Hydroxide Octahydrate, Aluminum Ammonium Sulfate, and Sodium Hydrogen Phosphate were analyzed to proper operating conditions using a Differential Scanning Calorimeter (DSC) and the best PCM was obtained with the Aluminum Ammonium Sulfate and Sodium Hydrogen Phosphate mixture. Thus, eutectic PCM was obtained and used in a heat storage tank of the solar water heating system. Energy and exergy analysis of heat storage tank was performed with and without the PCM. Energy and exergy analysis has shown that the heat storage tank with the PCM is more efficient than without the PCM and the maximum exergy efficiency was obtained as 22% with the heat storage tank with the PCM.     

Removal of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent

Environmental Science and Pollution Research - Polypyrrole (PPy) conducting films, doped with 4-amino-3-hydroxynaphthalene sulfonic acid (AHNSA), were electrosynthesized by anodic oxidation of...     

Exergy for better environment and sustainability

In this paper, some key aspects and definitions of exergy are presented, and practical examples are given in order to highlight its usefulness in design, analysis and performance improvement for various types of energy processes for better environment and sustainable development. The relations between exergy, sustainability and environmental impact are illustrated to show how improving the performance of the process through exergy efficiency affects the environmental impact and sustainable development. Both exergy and energy efficiencies for various systems/processes are also studied for comparison purposes.