Carbonaceous and nitrogenous disinfection byproduct precursor variation during the reversed anaerobic–anoxic–oxic process of a sewage treatment plant

Disinfection byproduct(DBP)precursors in wastewater during the reversed anaerobic–anoxic–oxic(A~2/O)process,as well as their molecular weight(MW)and polarity-based fractions,were characterized with UV scanning,fluorescence excitation emission matrix,Fourier transform infrared and nuclear magnetic resonance spectroscopy.Their DBP formation potentials(DBPFPs)after chlorination were further tested.Results indicated that the reversed A~2/O process could not only effectively remove the dissolved organic carbon(DOC)and dissolved total nitrogen in the wastewater,but also affect the MW distribution and hydrophilic–hydrophobic properties of dissolved organic matter(DOM).The accumulation of low MW and hydrophobic(HPO)DOM was possibly due to the formation of soluble microbial product-like(SMP-like)matters in the reversed A~2/O treatment,especially in the anoxic and aerobic processes.Moreover,DOM in the wastewater displayed a high carbonaceous disinfection byproduct formation potential(C-DBPFP)in the fractions of MW100 k Da and MW5 k Da,and revealed an increasing tendency of nitrogenous disinfection byproduct formation potential(N-DBPFP)with decrease of MW.For polarity-based fractions,the HPO fraction of wastewater showed significantly higher C-DBPFP and N-DBPFP than hydrophilic and transphilic fractions.Therefore,although the reversed A~2/O process could remove most DBP precursors by DOC reduction,it led to the enhancement of DBPFP with the formation and accumulation of low MW and HPO DOM.In addition,strong correlations between C-DBPFPs and SUVA,and between N-DBPFPs and DON/DOC,were observed in the wastewater,which might be helpful for DBPFP prediction in wastewater and reclaimed water chlorination.     

A green method to synthesize flowerlike Fe(OH)3 microspheres for enhanced adsorption performance toward organic and heavy metal pollutants

Dyestuffs and heavy metal ions in water are seriously harmful to the ecological environment and human health.Three-dimensional(3 D) flowerlike Fe(OH)_3 microspheres were synthesized through a green yet low-cost injection method,for the removal of organic dyes and heavy metal ions.The Fe(OH)_3 microspheres were characterized by thermal gravimetric analysis(TGA),Fourier transform infrared(FT-IR),and transmission electron microscopy(TEM) techniques.The adsorption kinetics of Congo Red(CR) on Fe(OH)_3 microspheres obeyed the pseudo-second-order model.Cr~(6+) and Pb~(2+) adsorption behaviors on Fe(OH)_3 microspheres followed the Langmuir isotherm model.The maximum adsorption capacities of the synthesized Fe(OH)_3 were 308,52.94,and 75.64 mg/g for CR,Cr~(6+),and Pb~(2+) respectively.The enhanced adsorption performance originated from its surface properties and large specific surface area of 250 m~2/g.The microspheres also have excellent adsorption stability and recyclability.Another merit of the Fe(OH)_3 material is that it also acts as a Fenton-like catalyst.These twin functionalities(both as adsorbent and Fenton-like catalyst) give the synthesized Fe(OH)_3 microspheres great potential in the field of water treatment.     

长输管道穿(跨)越江河段泄漏应急处置探讨

分析了企业应急处置工作中存在的问题,针对输油管道穿(跨)越江河段泄漏应急处置提出了解决方案。     

河南省冬季3次重污染过程的数值模拟及输送特征分析

利用WRF-Chem模式模拟2015年11月27日—12月1日、12月5—14日、12月19—25日河南3次重污染过程,结合空气污染资料和ERA-Interim再分析资料,对比分析了这3次重污染过程的开始、持续和结束及污染物的输送特征.结果表明,静稳天气有利于污染的发展持续,3次重污染过程的结束均是由西路冷空气入侵造成的.第1次重污染过程平均风场上的风速均为小风或静风,从湖北到河南南部风向为偏南风;而第2和第3次重污染过程平均风场分别以偏东和偏北风为主.第2和第3次重污染过程中均存在明显的由北向南的污染物输送过程.3次重污染过程中,河南省本地排放对本省PM_(2.5)浓度的平均贡献率最大,而河南省周边区域对河南PM_(2.5)浓度的平均贡献率在这3次过程中不一样,第1次重污染过程,河南南部主要受偏南风影响,湖北对河南PM_(2.5)浓度的平均贡献率最大,为20.7%;第2和第3次重污染过程主要受偏东风影响,安徽和江苏对河南PM_(2.5)浓度的平均贡献率最大,分别为17.7%和18.5%.3次重污染过程中,安阳的主要污染输送源均不相同,分别来自河北、江苏和安徽、本省.     

基于蒙特卡洛模拟算法的环氧乙烷球罐多米诺效应风险分析

基于多米诺效应的故障概率模型,结合某化工公司环氧乙烷存储装置,借助ALOHA软件判定装置间的多米诺影响系数。在此基础上,分别应用分析算法和蒙特卡洛模拟算法对考虑到多米诺效应情况下一特定环氧乙烷球罐T_1的失效概率进行计算分析。结果表明,分析算法和蒙特卡洛算法的结果呈现出较好的一致性。并且随着时间的推移,2种方法的吻合度越来越高。本方法的提出有效地简化了考虑多米诺效应情况下多个装置失效概率的计算,所得结论为工厂对球罐间安全屏障的设计提供一定的借鉴作用。     

大规模突发事件应急资源调度的多目标鲁棒优化研究

为及时有效地控制大规模突发事件的不良影响,考虑应急响应系统中多种应急物资需求呈不确定性的特征,建立最小化总成本和总时间的多目标-两阶段临时配送中心选址和应急资源调度模型。采用相对鲁棒优化方法对模型进行求解,利用区间估计描述不确定性因素,并引入扰动系数和控制参数调节模型的鲁棒性和最优性。数值实验结果表明,该模型能有效解决需求不确定下应急资源调度网络的构建问题,且能保证应急决策良好的鲁棒性。最后,通过分析测算单目标与多目标模型下目标值的结果以及不同控制参数与扰动系数下目标值结果,进一步验证了该模型符合应急响应实际情况。     

Analysis of diffusion-adsorption equivalency of landfill liner systems for organic contaminants

The equivalence between multilayered barriers regarding diffusion and adsorption is analyzed by means of an analytical method. The bottom boundary of the liner system is defined by assuming concentration continuous and flux continuous conditions of the contaminant between the bottom liner layer and the underlying soil. Five different liner systems were compared in terms of solute breakthrough time. The results of the analysis show that breakthrough time of the hydrophobic organic compounds for a 2-meter-thick compacted clay liner (CCL) can be 3-4 orders of magnitude greater than the breakthrough time for a geosynthetic clay liner (GCL) composite liner. The GM/GCL and GM/CCL composite liner systems provide a better diffusion barrier for the hydrophilic organic compounds than that for the hydrophobic compounds due to their different Henry's coefficient. The calculated breakthrough times of the organic contaminants for the Chinese standard liner systems were found to be generally greater than those for the GCL alternatives, for the specific conditions examined. If the distribution coefficient increases to 2.8 for the hydrophobic compounds or 1.0 for the hydrophilic compounds, the thickness of the attenuation layer needed to achieve the same breakthrough time as the standard liner systems can be reduced by a factor of about 1.9-2.4. As far as diffusive and adsorption contaminant transport are concerned, GM or GCL is less effective than CCL.     

城市污水处理厂污泥的综合利用与资源化

随着城市污水处理厂不断建成与使用,污泥量的增加速度越来越快。污泥作为污水处理的副产品,如果不及时处理将造成严重的二次污染。通过对当前污泥综合利用和资源化技术及其发展趋势的分析,结合调查实例,综述了我国城市污水处理厂污泥资源化利用方法与途径;提出了进一步加强对污泥的资源化研究,开发出低能耗、低成本、高效率的能够广泛应用的资源化方法,应是今后研究中的重点。     

聚丙烯酰胺与聚合氯化铝联合投加净化微污染水源水的试验研究

强化混凝是去除水中消毒副产物的最佳方法之一。文章针对强化混凝技术,从净化微污染水源水的角度出发,通过混凝搅拌试验,评价了联合投加聚丙烯酰胺与聚合氯化铝对原水中有机物的去除效果,考察了混凝剂投加量、投加方式等对去除效果的影响。结果表明,联合投加助凝剂和混凝剂有利于水中CODMn及浊度的去除,且可以节省药剂用量,具有进一步试验和推广的价值。     

浅谈提高环境影响评价中工程分析质量

提出如何在社会区域类环境影响评价中提高工程分析质量的措施,以齐齐哈尔市第一医院为例,在工艺流程或产污环节分析中,应重点突出与污染物排放有关的工序和污染物的产生量;现有工程的污染物计算应结合监测和生产状况综合分析;以"清洁生产审计"的观点进行"清洁生产分析";对提出的污染物治理措施应具有可操作性。