Electron transfer sensitized photodechlorination of surfactant solubilized PCB 138

Sensitized photodechlorination of polychlorinated biphenyl, PCB 138, in three different surfactant solutions was studied. The sensitizer of choice was leuco-methylene blue, which was produced in situ from methylene blue using either triethylamine or sodium borohydride. Three types of surfactants, anionic (SDS), neutral (TWEEN 80), and cationic (CTAB) at different concentrations were investigated. The neutral and cationic surfactants were found to be more effective than anionic. In each case the surfactant concentration was found to play a significant role in the rate of dechlorination. For different sensitized systems (triethylamine or sodium borohydride), a different product distribution and a different pathway of dechlorination was observed.     

Environmental Impact of Residential Wood Combustion Emissions and its Implications

Currently available information suggests a substantial environmental impact from residential wood combustion emissions. Air pollution from this source is widespread and increasing. Current ambient measurements, surveys, and model predictions indicate winter respirable (<2 μm) emissions from residential wood combustion can easily exceed all other sources. Both the chemical potency and deliverability of the emissions from this source are of concern. The emissions are almost entirely in the inhalable size range and contain toxic and priority pollutants, carcinogens, co-carcinogens, cilia toxic, mucus coagulating agents, and other respiratory irritants such as phenols, aldehydes, etc. This source is contributing substantially to the nonattainment of current particulate, carbon monoxide, and hydrocarbon ambient air quality standards and will almost certainly have a significant impact on potential future standards such as inhalable particulates, visibility, and other chemically specific standards. Emission from this growing source is likely to require additional expenditures by industry for air pollution control equipment in nonattainment areas.     

Filter Beds: Energy-Efficient Packing Diameter

Factors which help minimize pressure drop at a given level of collection efficiency for a bed packed with roughly spherical collectors are studied here by using the quality factor, the ratio of the single collector collection efficiency to the force per unit area on the single collector. This analysis indicates that energy-efficient designs can be obtained as follows: choose a representative particle size; if impaction predominates, design for an impaction parameter near one; if interception predominates, design for the smallest packing diameters feasible; if gravitational settling predominates, design for the largest packing diameters possible; if diffusion predominates, design for collector Reynolds numbers near 10². Some more general cases are also discussed.     

The Relationship between Cross-Sectional and Time Series Studies

Abstract

There is a dearth of information on dust emissions from sources that are unique to the U.S. Department of Defense testing and training activities. However, accurate emissions factors are needed for these sources so that military installations can prepare accurate particulate matter (PM) emission inventories. One such source, coarse and fine PM (PM₁₀ and PM_2.5) emissions from artillery backblast testing on improved gun positions, was characterized at the Yuma Proving Ground near Yuma, AZ, in October 2005. Fugitive emissions are created by the shockwave from artillery pieces, which ejects dust from the surface on which the artillery is resting. Other contributions of PM can be attributed to the combustion of the propellants. For a 155–mm howitzer firing a range of propellant charges or zones, amounts of emitted PM₁₀ ranged from ～19 g of PM₁₀ per firing event for a zone 1 charge to 92 g of PM₁₀ per firing event for a zone 5. The corresponding rates for PM_2.5 were ～9 g of PM_2.5 and 49 g of PM_2.5 per firing. The average measured emission rates for PM₁₀ and PM_2.5 appear to scale with the zone charge value. The measurements show that the estimated annual contributions of PM₁₀ (52.2 t) and PM_2.5 (28.5 t) from artillery backblast are insignificant in the context of the 2002 U.S. Environment Protection Agency (EPA) PM emission inventory. Using national–level activity data for artillery fire, the most conservative estimate is that backblast would contribute the equivalent of 5 x 10^–4% and 1.6 x 10^–3% of the annual total PM₁₀ and PM_2.5 fugitive dust contributions, respectively, based on 2002 EPA inventory data.     

Using Twitter to communicate conservation science from a professional conference

Scientists are increasingly using Twitter as a tool for communicating science. Twitter can promote scholarly discussion, disseminate research rapidly, and extend and diversify the scope of audiences reached. However, scientists also caution that if Twitter does not accurately convey science due to the inherent brevity of this media, misinformation could cascade quickly through social media. Data on whether Twitter effectively communicates conservation science and the types of user groups receiving these tweets are lacking. To address these knowledge gaps, we examined live tweeting as a means of communicating conservation science at the 2013 International Congress for Conservation Biology (ICCB). We quantified and compared the user groups sending and reading live tweets. We also surveyed presenters to determine their intended audiences, which we compared with the actual audiences reached through live tweeting. We also asked presenters how effectively tweets conveyed their research findings. Twitter reached 14 more professional audience categories relative to those attending and live tweeting at ICCB. However, the groups often reached through live tweeting were not the presenters’ intended audiences. Policy makers and government and non‐governmental organizations were rarely reached (0%, 4%, and 6% of audience, respectively), despite the intent of the presenters. Plenary talks were tweeted about 6.9 times more than all other oral or poster presentations combined. Over half the presenters believed the tweets about their talks were effective. Ineffective tweets were perceived as vague or missing the presenters’ main message. We recommend that presenters who want their science to be communicated accurately and broadly through Twitter should provide Twitter‐friendly summaries that incorporate relevant hashtags and usernames. Our results suggest that Twitter can be used to effectively communicate speakers’ findings to diverse audiences beyond conference walls.