Corporate Social Responsibility (CSR) practices developed by Brazilian companies: an exploratory study

In a world where companies have major influence over the economy, politics, and environment, they must be held accountable for their actions. With this in mind, the publication of sustainability reports is in a company’s best interest, since the disclosure of Corporate Social Responsibility (CSR) and sustainable practices can bring enormous advantages, largely related to a company’s image. The amount of information presented in sustainability reports turns them into valuable sources for research data, allowing analyses related to CSR and management practices, stakeholder relations, language used, among others. However, there is no a paper in the literature that analyzes theses information jointly for the Brazilian companies, and then we decided to explore this theme. This research aimed to identify advances and gaps of CSR practices performed by Brazil companies, through the analysis of 30 sustainability reports published between 2014 and 2015. The main findings indicate that, in general, the analyzed companies are experienced in sustainability reporting; however, there is still room for improvements, including a better mapping and reporting of practices involving the integration of CSR to organizational structure, stakeholder engagement, and continuous improvement practices.     

Method to recover and reuse chromated copper arsenate wood preservative from spent treated wood

The volume of chromated copper arsenate (CCA) treated wood products coming out of service is expected to increase dramatically during the next decade. There is a need for an alternative waste management approach to landfilling. This paper investigates the variables affecting extraction of CCA components from wood particles and the potential to oxidize and reuse the recovered chemicals. Most of the CCA components could be extracted by 10% H2O2 at 50 degrees C in 6 h with an average extraction efficiency of 95% for Cr, 94% for Cu and 98% for As. The extract containing Cr(III), Cu(II) and As(V) could be oxidized in several stages by aqueous 2.5% w/w H2O2 in less than 2 h to a condition where it was compatible with CCA treating solutions and could be reused for treating new wood. When the recovered extract was mixed with fresh CCA solution in different ratios, the mixed CCA-C solutions had similar solution stability as freshly prepared CCA-C solution and treated wood had similar leaching properties as wood treated with fresh solution.     

Designing green plasticizers: influence of molecular geometry on biodegradation and plasticization properties

The plasticizer di (2-ethylhexyl) phthalate (DEHP) and its metabolites are considered ubiquitous contaminants, which have a range of implications on the environment and human health. This work considered several alternative compounds with structural features similar to DEHP. This added to the understanding of why DEHP is so poorly biodegraded once it enters the environment. These alternative compounds were based on 2-ethylhexyl diesters of maleic acid (cis-isomer), fumaric acid (trans-isomer) and succinic acid (saturated analogue). The rates of biodegradation by the common soil bacterium Rhodococcus rhodocrous were shown to be dependent on the structure of the central unit derived from the diacid used to make the ester. The diacid components of DEHP and the maleate both had a cis orientation and they were the two that were slow to biodegrade. Plasticizing properties were also compared and, because the ester of the saturated succinic acid was degraded quickly and also had good plasticizing properties, it was concluded that the succinic esters of straight chain alcohols would make the best green plasticizers. The maleate ester had excellent plasticizing properties but this is mitigated by a significant resistance to biodegradation.     

Assessment of bisphenol A released from reusable plastic, aluminium and stainless steel water bottles

Bisphenol A (BPA) is a ubiquitous high volume industrial chemical that is an estrogen and an environmental endocrine disrupting chemical. Bisphenol A is used extensively in the production of consumer goods, polycarbonate plastics, epoxy resins and coatings used to line metallic food and beverage cans. There is great concern regarding the possible harmful effects from exposures that result from BPA leaching into foods and beverages from packaging or storage containers. The objective of this study was to independently assess whether BPA contamination of water was occurring from different types of reusable drinking bottles marketed as alternatives to BPA-containing polycarbonate plastics. Using a sensitive and quantitative BPA-specific competitive enzyme-linked immunosorbent assay we evaluated whether BPA migrated into water stored in polycarbonate or copolyester plastic bottles, and different lined or unlined metallic reusable water bottles. At room temperature the concentration of BPA migrating from polycarbonate bottles ranged from 0.2 to 0.3 mg L⁻¹. Under identical conditions BPA migration from aluminium bottles lined with epoxy-based resins was variable depending on manufacturer ranging from 0.08 to 1.9 mg L⁻¹. Boiling water significantly increased migration of BPA from the epoxy lined bottles. No detectable BPA contamination was observed in water stored in bottles made from Tritan™ copolyester plastic, uncoated stainless steel, or aluminium lined with EcoCare™. The results from this study demonstrate that when used according to manufacturers’ recommendations reusable water bottles constructed from “BPA-free” alternative materials are suitable for consumption of beverages free of BPA contamination.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

State and Local Air Pollution Control Agency Salary Levels—1971

This paper is an examination of the range of salary levels of state, local, and multijurisdictional air pollution control agencies for specific occupational categories. It is based on a manpower and training survey of such agencies conducted by the Office of Air Programs of the Environmental Protection Agency during 1971. Since inadequate salaries have been identified as a primary obstacle in staffing air pollution control agencies, an analysis of salary levels was among the focal points for the survey.

Salaries were found to vary according to occupational category, type of agency, and size of agency. In most instances, salary levels increase as the size of the agency increases. Mean starting salaries have risen significantly since 1968, and salaries for chemists and engineers are becoming more competitive with salaries in private industry.     

Legal and Regulatory Issues in Air Quality Management for the Electric Power Industry

A Conference on Air Quality Management in the Electric Power Industry was held at The University of Texas at Austin in Austin, TX, on January 28-30, 1976. The opening session of the Conference was devoted to legal and regulatory issues in air pollution control related to the electric power industry. The purpose of this session was to present the viewpoints of those Federal and state regulatory agencies most directly involved in air pollution control for the electric power industry. Emphasis was placed on those issues relating to the increasing need for coal and oil combustion to meet the Nation’s electrical energy requirements, concentrating on the five southwestern states of Arkansas, Louisiana, New Mexico, Oklahoma, and Texas in Federal Region VI.     

Photocatalytic ozonation of pesticides in a fixed bed flow through UVA-LED photoreactor

In this study, a fixed bed flow through UVA-LED photoreactor was used to compare the efficiency of ozone, photocatalysis and photocatalysis-ozone degradation, and mineralization of two pure pesticides, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA), and a commercial one, Killex®. For the degradation of the parent compounds, ozone-based processes were more effective. While for mineralization, photocatalytic processes were more effective. Photocatalytic ozonation was the most efficient process for both the degradation and mineralization of the parent compounds. The degradation rates and mineralization by photocatalytic ozonation were higher than the summation of the corresponding rates by ozonation and photocatalysis, indicating a symbiotic relationship.Overall, the photocatalytic ozonation process with the fixed bed TiO₂ reduces the time needed for the degradation and mineralization of the pesticides, reduces the costs of powder catalyst separation and overcomes the reduced efficiency of immobilized catalysts, which makes the process quite attractive for practical applications.     

Metal Contamination of Sediments and Soils of Bayou Saint John: A Potential Health Impact to Local Fishermen?

This research examines the pattern of sediment contamination of an urban bayou of New Orleans (formerly a natural waterway) and the potential for human exposure from consumption of fish caught in the bayou. Sediments and soils of Bayou Saint John were evaluated for lead (Pb), zinc (Zn), and cadmium (Cd). Sediment cores were collected at bridges (n = 130) and sites between the bridges (n = 303) of the bayou. In addition, soil samples (n = 66) were collected along the banks of the bayou. Sediments below the bridges contain significantly more (p-value approximately 10(-7)) Pb and Zn (medians of 241 and 230 mg kg(-1), respectively) than bayou sediments located between bridges (medians of 64 and 77 mg kg(-1), respectively). Sediments below bridges of the upper reaches of the bayou contain significantly larger amounts of metals (p < 10(-14) for Pb and Zn and p approximately 10(-8) for Cd) (medians of 329, 383 and 1.5, respectively) than sediments below bridges in the lower reaches of the bayou (medians of 43, 31 and 0.5 for Pb, Zn and Cd, respectively). Likewise, medians for sediments located between bridges contain significantly (p < 10(-14)) higher quantities of Pb, Zn and Cd (170, 203 and 1.8 mg kg(-1), respectively) in the upper bayou than Pb, Zn, and Cd (48, 32, and 0.8 mg kg(-1), respectively) in the lower reaches of the bayou. The potential risk for human exposure may be magnified by the fact that fishing generally occurs from the numerous bridges that cross the bayou. Poor and minority people do most of the fishing. Most people (87%) indicated they ate fish they caught from the Bayou.