Performance of Gd-doped Ti-based Sb-SnO2 anodes for electrochemical destruction of phenol

The performance of electrodes for the electro-catalytic decomposition of a model pollutant (phenol) was enhanced using Gd-doped Ti/SnO(2)-Sb electrodes prepared by a thermal deposition method. Phenol degradation followed first-order rate kinetics, with the maximum rate achieved using a 2% Gd doping level (molar ratio based on Gd:Sn) for tests conducted over a doping range of 1-10%. The first-order rate constant with 2% Gd was 0.044 min(-1), versus 0.026 min(-1) obtained with the control (plain Ti/SnO(2)-Sb). TOC removal and UV scans revealed that different intermediates were produced for different Gd contents, and that destruction efficiencies of these intermediates also varied with Gd doping levels of 1-5%. Electrodes were characterized by scanning electron microscopy, X-ray diffraction, electron dispersive spectrometry, and X-ray photon-electron spectroscopy. It is suggested that the state of specific active sites on the electrode surface and the oxygen transfer activity at the electrode/electrolyte interface affect the performance of anodes with different compositions.     

Characterization of subsoil heterogeneity, estimation of grain size distribution and hydraulic conductivity at the Krauthausen test site using Cone Penetration Test

A Cone Penetration Test (CPT) survey with a high spatial resolution was performed in order to investigate the stratigraphy as well as the spatial variability of various soil properties of the Krauthausen test site. Analyses of the CPT measurements showed the subsurface to be dominated by a planar layered structure. Variogram analysis of the various CPT parameters disclosed that within each layer the soil properties have an anisotropic spatial correlation structure. A correlation analysis of the measured CPT data and co-located grain size distributions from soil samples was performed. Since the correlation coefficients were greater equal to 0.7, a reliable empirical relationship between the data sets could be developed. Based on this empirical relationship grain size distributions were estimated at CPT locations. The statistical processing of estimated and measured grain size distributions with respect to their spatial correlation structure disclosed good agreement between the data sets. The estimated grain size distributions from CPT data were used to estimate the hydraulic conductivity in the aquifer. The results provide detailed information of the spatial heterogeneity of the hydraulic conductivity at Krauthausen test site. The validation of these results, using a prior investigation of hydraulic conductivity statistics, suggests the CPT a fast and inexpensive tool for the estimation of three dimensional hydraulic conductivity fields with sufficient accuracy.     

The ozone productivity of n-propyl bromide: Part 2--An exception to the Maximum Incremental Reactivity Scale

In an earlier paper the ozone-forming potential of n-propyl bromide (NPB) was studied with a new methodology designed to address issues associated with a marginal smog-forming compound. However, the U.S. Environmental Protection Agency (EPA) subsequently revised its policy and now recommends using the Maximum Incremental Reactivity (MIR) scale to rank the ozone-forming potential of all volatile organic compounds (VOCs), including those of marginal ozone productivity. Nevertheless, EPA contemplated exceptions to the box-model-derived MIR scale by allowing use of photochemical grid-model simulations for case specific reactivity assessments. The California Air Resources Board (CARB) also uses the MIR scale and CARB has a Reactivity Scientific Advisory Committee that can consider exceptions to the MIR scale. In this study, grid-model simulations that were recommended by EPA are used to evaluate the incremental ozone impacts of NPB using an update to the chemical mechanism developed in an earlier paper. New methods of analysis of the grid-model output are further developed here to quantify the relative reactivities between NPB and ethane over a wide range of conditions. The new grid-model-based analyses show that NPB is significantly different and generally less in ozone-forming potential (i.e., reactivity) than predicted by the box-model-based MIR scale relative to ethane, EPA's "bright-line" test for non-VOC status. Although NPB has low reactivity compared to typical VOCs on any scale, the new grid-model analyses developed here show that NPB is far less reactive (and even has negative reactivity) compared to the reactivity predicted by the MIR scale.     

Effects of suburban land use on phosphorus fractions and speciation in the Upper Peruque Creek, Eastern Missouri

This field study was conducted to explore the spatial and seasonal changes in total phosphorus and fraction distribution in relation to land uses. Water samples were collected biweekly at four sampling locations, which represented different potential phosphorus sources along the Upper Peruque Creek in Eastern Missouri. Total phosphorus concentrations of > 0.8 mg/L appeared sporadically at site 2, downstream of a small community, with an average of 0.82 +/- 0.14 mg/L in fall. Particulate phosphorus accounted for approximately 80% of total phosphorus at all sampling sites, except for site 2, where approximately 50 to 75% of dissolved phosphorus was often observed. Approximately 71 and 85% of total phosphorus in the sediment was in the form of iron (III) phosphate at the headwaters and downstream sites, respectively; 29 and 15% was in the form of phytic acid at the two sites. Land uses affect the total phosphorus concentration and alternate phosphorus fraction and speciation in the creek.     

Relationship between atmospheric pollution processes and synoptic pressure patterns in northern China

The air pollution index (API) sequences in 10 cities in northern China and the synoptic pressure patterns during autumn and winter from 2002 to 2006 were analyzed with diagnostic and statistical methods. The results showed that the air qualities in northern China had a prominent correlation with the pressure systems. It revealed that (a) the increasing phase of API was associated with high pressure and the successive low pressure, (b) the preceding part of front (i.e. the retral part of low pressure) was associated with the maximum of API values during a cycle of air pollution process, (c) the pressure systems with high gradient led to the decrease of API, and (d) the synoptic pressure patterns and their evolvements were the main causes of regional air pollution processes. These relations can be used to analyze the variation characteristics and mechanism of regional atmosphere pollution process, and provide important basis for the qualitative prediction, control, and management of regional air pollution problems.     

Effects of a zeolite-selective catalytic reduction system on comprehensive emissions from a heavy-duty diesel engine

The effects of a zeolite urea-selective catalytic reduction (SCR) aftertreatment system on a comprehensive spectrum of chemical species from diesel engine emissions were investigated in this study. Representative samples were collected with a newly developed source dilution sampling system after an aging process designed to simulate atmospheric dilution and cooling conditions. Samples were analyzed with established procedures and compared between the measurements taken from a baseline heavy-duty diesel engine and also from the same engine equipped with the exhaust aftertreatment system. The results have shown significant reductions for nitrogen oxides (NOx), carbon monoxide, total hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), and organic carbon (OC) emissions. Additionally, less significant yet notable reductions were observed for particulate matter mass and metals emissions. Furthermore, the production of new species was not observed with the addition of the zeolite urea-SCR system joined with a downstream oxidation catalyst.     

Life cycle assessment of disposal of residues from municipal solid waste incineration: recycling of bottom ash in road construction or landfilling in Denmark evaluated in the ROAD-RES model

Two disposal methods for MSWI bottom ash were assessed in a new life cycle assessment (LCA) model for road construction and disposal of residues. The two scenarios evaluated in the model were: (i) landfilling of bottom ash in a coastal landfill in Denmark and (ii) recycling of bottom ash as subbase layer in an asphalted secondary road. The LCA included resource and energy consumption, and emissions associated with upgrading of bottom ash, transport, landfilling processes, incorporation of bottom ash in road, substitution of natural gravel as road construction material and leaching of heavy metals and salts from bottom ash in road as well as in landfill. Environmental impacts associated with emissions to air, fresh surface water, marine surface water, groundwater and soil were aggregated into 12 environmental impact categories: Global Warming, Photochemical Ozone Formation, Nutrient Enrichment, Acidification, Stratospheric Ozone Depletion, Human Toxicity via air/water/soil, Ecotoxicity in water/soil, and a new impact category, Stored Ecotoxicity to water/soil that accounts for the presence of heavy metals and very persistent organic compounds that in the long-term might leach. Leaching of heavy metals and salts from bottom ash was estimated from a series of laboratory leaching tests. For both scenarios, Ecotoxicity(water) was, when evaluated for the first 100 yr, the most important among the twelve impact categories involved in the assessment. Human Toxicity(soil) was also important, especially for the Road scenario. When the long-term leaching of heavy metals from bottom ash was evaluated, based on the total content of heavy metals in bottom ash, all impact categories became negligible compared to the potential Stored Ecotoxicity, which was two orders of magnitudes greater than Ecotoxicity(water). Copper was the constituent that gave the strongest contributions to the ecotoxicities. The most important resources consumed were clay as liner in landfill and the groundwater resource which was potentially spoiled due to leaching of salts from bottom ash in road. The difference in environmental impacts between landfilling and utilization of bottom ash in road was marginal when these alternatives were assessed in a life cycle perspective.     

Recycled vertical flow constructed wetland (RVFCW)--a novel method of recycling greywater for irrigation in small communities and households

The use of greywater for irrigation is becoming increasingly common. However, raw greywater is often contaminated and can cause environmental harm and pose health risks. Nevertheless, it is often used without any significant pretreatment, a practice mistakenly considered safe. The aim of this study was to develop an economically sound, low-tech and easily maintainable treatment system that would allow safe and sustainable use of greywater for landscape irrigation in small communities and households. The system is based on a combination of vertical flow constructed wetland with water recycling and trickling filter, and is termed recycled vertical flow constructed wetland (RVFCW). The RVFCW's properties, removal efficiency, hydraulic parameters and feasibility were studied, as well as the environmental effects of the treated greywater, as reflected by soil and plant parameters over time. The RVFCW was efficient at removing virtually all of the suspended solids and biological oxygen demand, and about 80% of the chemical oxygen demand after 8h. Fecal coliforms dropped by three to four orders of magnitude from their initial concentration after 8h, but this was not always enough to meet current regulations for unlimited irrigation. The treated greywater had no significant negative impact on plants or soil during the study period. The feasibility analysis indicated a return over investment after approximately three years. We concluded that the RVFCW is a sustainable and promising treatment system for greywater use that can be run and maintained by unskilled operators.     

Epiphytic lichens as biomonitors of atmospheric pollution in Slovenian forests

Two country-wide surveys using epiphytic lichens as biomonitors of atmospheric pollution carried out during 2000 and 2001 in Slovenia were compared with surveys in 1991 and 1992. In the first survey, epiphytic lichen cover was studied in more than 500 plots of the 4 x 4 km national grid carried out within the framework of forest decline inventories. In the second survey, the epiphytic lichen Hypogymnia physodes (L.) Nyl., was collected on a 16 x 16 km bioindication grid and analysed for S, N, As, Br, Ce, Cd, Cr, K, La, Mo, Rb, Sb, Th, U and Zn contents. Only 'forested area' sampling points were included in the present study. Lichen cover was low, with about 70% of plots with less than 10% foliose lichen cover. No relationship was found between Hypogymnia trace element, N and S concentrations and foliose epiphytic lichen cover.     

多层砌体房屋震害预测分析

对目前我国房屋建筑中一种最为广泛应用的结构形式房屋——多层砌体房屋进行震害预测分析研究,简要介绍六种常用的多层砌体震害预测方法,易损性概率分析法或称为半经验半理论法、强度判别法、延性系数判别法、模糊类比法、人工神经网络法和结构理论计算法,在详细调查房屋基本情况的基础上,综合考虑以上几种方法,提出相应的震害预测的分析方法。对郑东新区砌体房屋进行震害预测,做出该地区的震害矩阵,并给出该地区砌体房屋在地震作用下的破坏程度及相应震害面积。