Climate impact from peat utilisation in Sweden

The climate impact from the useof peat for energy production in Sweden hasbeen evaluated in terms of contribution toatmospheric radiative forcing. This wasdone by attempting to answer the question`What will be the climate impact if onewould use 1 m<sup>2</sup> of mire for peatextraction during 20 years?'. Two differentmethods of after-treatment were studied:afforestation and restoration of wetland.The climate impact from a peatland –wetland scenario and a peatland –forestation – bioenergy scenario wascompared to the climate impact from coal,natural gas and forest residues.Sensitivity analyses were performed toevaluate which parameters that areimportant to take into consideration inorder to minimize the climate impact frompeat utilisation. In a `multiple generationscenario' we investigate the climate impactif 1 Mega Joule (MJ) of energy is produced every yearfor 300 years from peat compared to otherenergy sources.The main conclusions from the study are:?The accumulated radiative forcing from the peatland – forestation – bioenergy scenario over a long time perspective (300 years) is estimated to be 1.35 mJ/m²/m² extraction area assuming a medium-high forest growth rate and medium original methane emissions from the virgin mire. This is below the corresponding values for coal 3.13 mJ/ m²/ m² extraction area and natural gas, 1.71 mJ/ m²/ m² extraction area, but higher than the value for forest residues, 0.42 mJ/ m²/ m² extraction area. A `best-best-case' scenario, i.e. with high forest growth rate combined with high `avoided' methane (CH₄) emissions, will generate accumulated radiative forcing comparable to using forest residues for energy production. A `worst-worst-case' scenario, with low growth rate and low `avoided' CH₄ emissions, will generate radiative forcing somewhere in between natural gas and coal.?The accumulated radiative forcing from the peatland – wetland scenario over a 300-year perspective is estimated to be 0.73 –1.80 mJ/ m²/ m² extraction area depending on the assumed carbon (C) uptake rates for the wetland and assuming a medium-high methane emissions from a restored wetland. The corresponding values for coal is 1.88 mJ/ m²/ m² extraction area, for natural gas 1.06 mJ/ m²/ m² extraction area and for forest residues 0.10 mJ/ m²/ m² extraction area. A `best-best-case' scenario (i.e. with high carbon dioxide CO<sub>2</sub>-uptake combined with high `avoided' CH₄ emissions and low methane emissions from the restored wetland) will generate accumulated radiative forcing that decreases and reaches zero after 240 years. A `worst-worst-case' (i.e. with low CO<sub>2</sub>-uptake combined with low `avoided' CH₄ emissions and high methane emissions from the restored wetland) will generate radiative forcing higher than coal over the entire time period.?The accumulated radiative forcing in the `multiple generations' – scenarios over a 300-year perspective producing 1 MJ/year is estimated to be 0.089 mJ/ m<sup>2</sup> for the scenario `Peat forestation – bioenergy', 0.097 mJ/ m² for the scenario `Peat wetland with high CO<sub>2</sub>-uptake' and 0.140 mJ/ m<sup>2</sup> for the scenario `Peat wetland with low CO₂-uptake'. Corresponding values for coal is 0.160 mJ/ m², for natural gas 0.083 mJ/ m² and for forest residues 0.015 mJ/ m². Using a longer time perspective than 300 years will result in lower accumulated radiative forcing from the scenario `Peat wetland with high CO₂-uptake'. This is due to the negative instantaneous forcing that occurs after 200 years for each added generation.?It is important to consider CH₄ emissions from the virgin mire when choosing mires for utilization. Low original methane emissions give significantly higher total climate impact than high original emissions do.?Afforestation on areas previously used for peat extraction should be performed in a way that gives a high forest growth rate, both for the extraction area and the surrounding area. A high forest growth rate gives lower climate impact than a low forest growth rate.?There are great uncertainties related to the data used for emissions and uptake of greenhouse gases in restored wetlands. The mechanisms affecting these emissions and uptake should be studied further.     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

Fetal cardiac anomalies and genetic syndromes

Cardiac anomalies may occur in isolation or can be part of a genetic syndrome. In this article, we describe some of the genetic syndromes commonly associated with cardiac anomalies where there are other sonographic features that may aid accurate prenatal diagnosis. Copyright © 2004 John Wiley & Sons, Ltd.     

Structural chromosomal mosaicism and prenatal diagnosis

True structural chromosomal mosaicism are rare events in prenatal cytogenetics practice and may lead to diagnostic and prognostic problems. Here is described the case of a fetus carrying an abnormal chromosome 15 made of a whole chromosome 2p translocated on its short arm in 10% of the cells, in association with a normal cell line. The fetal karyotype was 46,XX,add(15)(p10).ish t(2;15)(p10;q10)(WCP2+)[3]/46,XX[27]. Pregnancy was terminated and fetus examination revealed a growth retardation associated with a dysmorphism including dolichocephaly, hypertelorism, high forehead, low-set ears with prominent anthelix and a small nose, which were characteristic of partial trisomy 2p. Possible aetiologies for prenatal mosaicism involving a chromosomal structural abnormality are discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Prenatal diagnosis of primary anophthalmia with a 3q27 interstitial deletion involving SOX2

We report an interstitial deletion of chromosome 3q26-q28 in a fetus in which anophthalmia had been detected prenatally. FISH analysis, using BAC clones encompassing the SOX2 locus, showed that SOX2 gene was involved in the chromosomal breakpoint of the deletion. This case confirms that haploinsufficiency for SOX2 plays a crucial role in human eye development and emphasizes the necessity of careful chromosomal analysis, including FISH analysis of the 3q region, in case of prenatal discovery of anophthalmia. Copyright © 2004 John Wiley & Sons, Ltd.     

Prenatal diagnosis of GM2-gangliosidosis B1 variant

Prenatal diagnosis in a pregnancy at risk for a juvenile B1 variant of GM₂-gangliosidosis was carried out. The biochemical study of the cultured amniocytes and the affected fetal brain is reported. The results obtained show that the sulphated artificial substrate can be used in the diagnosis of B1 variant, but not the neutral one. The accumulation of GM₂-ganglioside in the fetal brain of the B1 juvenile form and an infantile form of GM₂-gangliosidosis (0 variant) was compared.     

Optimisation of a PMAxx™-RT-qPCR Assay and the Preceding Extraction Method to Selectively Detect Infectious Murine Norovirus Particles in Mussels

Human noroviruses are a major cause for gastroenteritis outbreaks. Filter-feeding bivalve molluscs, which accumulate noroviruses in their digestive tissues, are a typical vector for human infection. RT-qPCR, the established method for human norovirus detection in food, does not allow discrimination between infectious and non-infectious viruses and can overestimate potentially infectious viral loads. To develop a more accurate method of infectious norovirus load estimation, we combined intercalating agent propidium monoazide (PMAxx™)-pre-treatment with RT-qPCR assay using in vitro-cultivable murine norovirus. Three primer sets targeting different genome regions and diverse amplicon sizes were used to compare one-step amplification of a short genome fragment to three two-step long-range RT-qPCRs (7 kbp, 3.6 kbp and 2.3 kbp amplicons). Following initial assays performed on untreated infectious, heat-, or ultraviolet-inactivated murine noroviruses in PBS suspension, PMAxx™ RT-qPCRs were implemented to detect murine noroviruses subsequent to their extraction from mussel digestive tissues; virus extraction via anionic polymer-coated magnetic beads was compared with the proteinase K-dependent ISO norm. The long-range RT-qPCR process detecting fragments of more than 2.3 kbp allowed accurate estimation of the infectivity of UV-damaged murine noroviruses. While proteinase K extraction limited later estimation of PMAxx™ pre-treatment effects and was found to be unsuited to the assay, magnetic bead-captured murine noroviruses retained their infectivity. Genome copies of heat-inactivated murine noroviruses differed by 2.3 log₁₀ between RT-qPCR and PMAxx™-RT-qPCR analysis in bivalve molluscs, the PMAxx™ pre-treatment allowing a closer approximation of infectious titres. The combination of bead-based virus extraction and PMAxx™ RT-qPCR thus provides a more accurate model for the estimation of noroviral bivalve mollusc contamination than the conjunction of proteinase K extraction and RT-qPCR and has the potential (once validated utilising infectious human norovirus) to provide an added measure of security to food safety authorities in the hazard assessment of potential bivalve mollusc contamination.

     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.