Improvements in modeling sagebrush concentrations of radioiodine released from the Hanford site

The Hanford Environmental Dose Reconstruction Project estimated the radiation dose to individuals from historical emissions of radioactive materials from the Hanford Site in Washington State. Project validation studies using predicted activity concentrations of 131I on sagebrush (Artemisia tridentata) showed a systematic underestimation against historical data during cold weather months, indicating a need for sagebrush model improvement. A deposition model for semi-volatile organic materials presented by Komp and McLachlen (Environ. Sci. Tech. 31 (1997) 886-890) is adapted here for gaseous iodine onto sagebrush. The deposition model includes a temperature-dependent term based on an integrated van't Hoff equation. Calibration data for the model are obtained from a release of 131I in 1963. Modeling results for releases in 1946 show a good match between historical data and predicted results using the new model. The new model shows improvement over interception-fraction type models, but requires plant-type-specific calibration data.     

Trace elements determination in lichens and in the airborne particular matter for the evaluation of the atmospheric pollution in a region of northern Italy

Lichens as biomonitors and neutron activation analysis as analytical technique have been employed to study the distribution of trace elements (TE) in a mountain region of north Italy (Biella) characterized by settlements of wool industry. Samples of airborne particulate matter collected onto filters, different species of lichens and samples of soils have been analyzed for the calculation of the enrichment factors (EFs) of more than 25 TE. By comparison of the corresponding EFs, the most suitable lichen species (Parmelia caperata) was selected as specific TE biomonitor of the area investigated. Samples of this lichen were collected and analyzed for the evaluation of the TE distribution in four different locations. The results obtained from the analysis of the lichens gave information about the predominant direction of pollutants transportation, while those related to the concentrations found in the air particulate allowed the evaluation of the degree of the local TE atmospheric pollution.     

A GPS-based system for recording the flight paths of birds

 The GPS recorder consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. Currently, it has a weight of 33 g. The recorder works reliably with a sampling rate of 1/s and with an operation time of about 3 h, providing time-indexed data on geographic positions and ground speed. The data are downloaded when the animal is recaptured. Prototypes were tested on homing pigeons. The records of complete flight paths with surprising details illustrate the potential of this new method that can be used on a variety of medium-sized and large vertebrates. Received: 2 February 2000 / Accepted in revised form: 17 April 2000     

Atrazine induction of cytochrome P450 in Chironomus tentans larvae

Cytochrome P450-dependent aldrin epoxidation was characterized in third instar larvae of the aquatic midge, Chironomus tentans. Optimal in vitro assay conditions for the epoxidase were pH 7.6 and 31 degrees C. Activity was linear up to 40 min of incubation time and 0.5 mg microsomal protein per incubation. The activity was concentrated in the microsomal fraction of whole body homogenates and was NADPH-dependent. The effect of atrazine exposure on aldrin epoxidase was measured to determine if this herbicide induces cytochrome P450-dependent activity. Comparisons of control and atrazine-exposed midges indicated increased epoxidase activity as a result of atrazine exposure, and a 45 kDa protein of increased intensity was observed after SDS-PAGE of microsomal protein. The molecular weight of this protein was similar in size to cytochrome P450 enzymes reported for other insects. Heme staining of SDS-PAGE gels and immunochemical studies using a Drosophila melanogaster anti-P450 polyclonal antiserum, further support the cytochrome P450 nature of this inducible 45 kDa protein.     

Environmental epidemiology forward

Environmental epidemiology is the specialized aspect of public health science that studies human health risk from environmental hazards. It is rises largely upon a foundation of public health surveillance, and relies heavily upon analyses of data for small areas and sparse population groups. To a degree, environmental epidemiology is assigned the role of discerning very subtle human health impacts, or discerning early evidence of a tragic sequence. In that context, environmental epidemiology has a substantial public education and risk communication role. Environmental epidemiology will be greatly advanced as effective biological markers of exposure and precursor health effects are developed. At this point in time, statistical methods are in place to monitor population-level disease rates in high-risk populations for early risk identification and sentinel event recognition. Advances in geographic methods have provided a boon to the discipline by advantaging spatial studies. These advances in the discipline still need further refinement and pilot experiences. The inclusion of environmental epidemiological considerations with instances of proposed industrial expansion, hazardous waste management, and contamination remediation is heartily recommended.     

Monitoring, modelling and environmental exposure assessment of industrial chemicals in the aquatic environment

Monitoring and laboratory data play integral roles alongside fate and exposure models in comprehensive risk assessments. The principle in the European Union Technical Guidance Documents for risk assessment is that measured data may take precedence over model results but only after they are judged to be of adequate reliability and to be representative of the particular environmental compartments to which they are applied. In practice, laboratory and field data are used to provide parameters for the models, while monitoring data are used to validate the models' predictions. Thus, comprehensive risk assessments require the integration of laboratory and monitoring data with the model predictions. However, this interplay is often overlooked. Discrepancies between the results of models and monitoring should be investigated in terms of the representativeness of both. Certainly, in the context of the EU risk assessment of existing chemicals, the specific requirements for monitoring data have not been adequately addressed. The resources required for environmental monitoring, both in terms of manpower and equipment, can be very significant. The design of monitoring programmes to optimise the use of resources and the use of models as a cost-effective alternative are increasing in importance. Generic considerations and criteria for the design of new monitoring programmes to generate representative quality data for the aquatic compartment are outlined and the criteria for the use of existing data are discussed. In particular, there is a need to improve the accessibility to data sets, to standardise the data sets, to promote communication and harmonisation of programmes and to incorporate the flexibility to change monitoring protocols to amend the chemicals under investigation in line with changing needs and priorities.     

Interpreting the relationship between pheromone component emission from commercial lures and captures of Helicoverpa zea (Boddie) in bucket and cone traps

Male corn earworm moths, Helicoverpa zea (Boddie), were captured in conical Texas pheromone traps (cone traps) and bucket traps baited with four different commercial lures manufactured by three different manufacturers. Because significant numbers were captured in bucket traps baited with some of the lures, and none with others, the volatile emissions from all of the lures were sampled and analyzed by gas chromatographic methods. The numbers of males captured in two types of trap were compared with bait emissions in an endeavor to define a more effective lure for bucket traps. The lure from one manufacturer captured the same numbers of males in both trap types; one captured more in bucket traps than in cone traps, and another captured only a small number in bucket traps. The emission rate of all active compounds from each of the different lures was approximately linear for the duration of the assays. A gas-liquid chromatographic peak associated with a third compound, (Z)-9-tetradecenal, which reduces behavioral responses, was observed in the emissions from all lures evaluated. The effectiveness of the Hercon (Emmigsville, PA) lure in capturing males in both types of trap was associated with a lower emission of (Z)-11-hexadecenal, (Z)-9-hexadecenal and (Z)-9-tetradecenal than from the other lures.     

Lead exposure of small herbivorous vertebrates from atmospheric pollution

Concentrations of Pb in livers of willow grouse (Lagopus lagopus), black grouse (Tetrao tetrix), and hare (Lepus timidus) were determined in samples collected during the period 1990-92 from 77 locations distributed across Norway. Our objective was to elucidate the impact of long-range atmospheric transport on the Pb exposure of the animals. The moss Hylocomium splendens was measured for atmospheric Pb deposition and Pb in soil at 60-cm depth was determined to reflect the natural geochemical background at the study locations. Strong positive relationships were found between Pb in liver and atmospheric deposition of Pb for all species and age groups studied. Results indicate that long-range atmospheric transport was the main source of Pb in the animals studied. This conclusion was supported by Pb analysis of typical food plants for the animals. Correlation between Pb in liver and Pb in soil mineral matter was observed only when considering sites with very low impact of atmospheric deposition. Even though the observed liver Pb concentrations may seem low (< or =12 microg g(-1) dw) they approach levels where sub-lethal effects cannot be ignored.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Estimating separately personal exposure to ambient and nonambient particulate matter for epidemiology and risk assessment: why and how

This paper discusses the legal and scientific reasons for separating personal exposure to PM into ambient and nonambient components. It then demonstrates by several examples how well-established models and data typically obtained in exposure field studies can be used to estimate both individual and community average exposure to ambient-generated PM (ambient PM outdoors plus ambient PM that has infiltrated indoors), indoor-generated PM, and personal activity PM. Ambient concentrations are not highly correlated with personal exposure to nonambient PM or total PM but are highly correlated with personal exposure to ambient-generated PM. Therefore, ambient concentrations may be used in epidemiology as an appropriate surrogate for personal exposure to ambient-generated PM. Suggestions are offered as to how exposure to ambient-generated PM may be obtained and used in epidemiology and risk assessment.