Spray-dry desulfurization of flue gas from heavy oil combustion

An experimental investigation on sulfur dioxide removal in a pilot-scale spray dryer from the flue gas generated by combustion of low-sulfur (S) heavy oil is reported. A limewater slurry was sprayed through an ultrasonic two-fluid atomizer in the spray-dry chamber, and the spent sorbent was collected downstream in a pulse-jet baghouse together with fly ash. Flue gas was sampled at different points to measure the desulfurization efficiency after both the spray-dry chamber and the baghouse. Parametric tests were performed to study the effect of the following variables: gas inlet temperature, difference between gas outlet temperature and adiabatic saturation temperature, lime-to-S ratio, and average size of lime particles in the slurry. Results indicated that spray drying is an effective technology for the desulfurization of low-S fuel oil flue gas, provided operating conditions are chosen carefully. In particular, the lowest gas inlet and outlet temperatures compatible with baghouse operation should be selected, as should a sufficiently high lime-to-S ratio. The attainment of a small lime particle size in the slurry is critical for obtaining a high desulfurization efficiency. A previously presented spray-dry flue gas desulfurization model was used to simulate the pilot-scale desulfurization tests, to check the ability of the model to predict the S capture data and its usefulness as a design tool, minimizing the need for pilot-scale experimentation. Comparison between model and experimental results was fairly good for the whole range of calcium/S ratios considered.     

An integrated approach to identify the origin of PM10 exceedances

Purpose

This study was aimed to the development of an integrated approach for the characterization of particulate matter (PM) pollution events in the South of Italy.

Methods

PM₁₀ and PM_2.5 daily samples were collected from June to November 2008 at an urban background site located in Bari (Puglia Region, South of Italy). Meteorological data, particle size distributions and atmospheric dispersion conditions were also monitored in order to provide information concerning the different features of PM sources.

Results

The collected data allowed suggesting four indicators to characterize different PM₁₀ exceedances. PM_2.5/PM₁₀ ratio, natural radioactivity, aerosol maps and back-trajectory analysis and particle distributions were considered in order to evaluate the contribution of local anthropogenic sources and to determine the different origins of intrusive air mass coming from long-range transport, such as African dust outbreaks and aerosol particles from Central and Eastern Europe. The obtained results were confirmed by applying principal component analysis to the number particle concentration dataset and by the chemical characterization of the samples (PM₁₀ and PM_2.5).

Conclusions

The integrated approach for PM study suggested in this paper can be useful to support the air quality managers for the development of cost-effective control strategies and the application of more suitable risk management approaches.     

Poly(lactic acid)/Cellulose Composites Obtained from Modified Cotton Fibers by Successive Acid Hydrolysis

This work is focused on the hydrolysis of cotton fibers from waste textiles to obtain micro and nanofibers to be used as reinforcements in polymer composites. To promote their compatibility with polymeric matrix, hydrolyzed cotton fibers were surface modified with various silane compounds. Thus, these fibers were mixed with commercial poly(lactic acid) (PLA) at 5% w/w loading by melt compounding. Acid treatments caused a decrease of the crystallinity index whereas the thermal stability was significantly improved, especially for cellulose fibers hydrolyzed in two steps. Morphological analysis revealed a reduction of the fibers diameter and a decrease of their length as a consequence of the hydrolysis. NMR analysis confirmed the silanization of the fibers by reaction with the silane agent. Tensile tests revealed that silanization treatments were able to increase the composite Young’s modulus and the stress at break with respect to the neat matrix, indicating that silanization improved the polymer/fiber compatibility interfacial adhesion. The overall results demonstrated that applying suitable surface modification strategies, waste cotton textiles can be effectively recycled as fillers in polymer based composites.     

Advanced techniques for characterization of organic matter from anaerobically digested grapemarc distillery effluents and amended soils

The effects of grapemarc distillery effluents on the quality of soil organic matter is extremely important to ensure the environmentally-safe and agronomically efficient use of these materials as organic amendment. In this work, the effects of the application of untreated (UG) and anaerobically digested grapemarc distillery effluents, either added with (AGM) or without mycorrhiza (AG), on soil humic acid (HA) were investigated in field plot experiments in comparison to HAs from a control soil and an inorganic fertilized soil. The humic acid-like fractions (HALs) isolated from UG, AG and soils were characterized for compositional, structural and functional properties by the use of elemental and functional group analysis, and ultraviolet/visible, Fourier transform infrared and fluorescence spectroscopies. Results obtained indicated that anaerobic digestion of effluents produced an extended mineralization with loss of organic C and stabilization of residual organic matter by increasing the content of HALs in the effluent. With respect to control soil HA, HALs isolated from UG and AG were characterized by smaller acidic functional group contents, a prevalent aliphatic character and smaller aromatic polycondensation and humification degrees. The chemical and spectroscopic characteristics of native soil HA were not substantially modified by application of UG, AG and AGM to soil, which suggests the occurred incorporation of the effluent HAL into native soil HA. In conclusion, these results showed the possibility of a beneficial and safe recycling of grapemarc distillery effluents as soil amendment.     

Monitoring of odor compounds produced by solid waste treatment plants with diffusive samplers

Nuisance caused by odors is one of the most important problems for waste management plants. To control an odor nuisance, it must first be quantified. The analytical difficulties in odor measurements are related to the high number of volatile components (belonging to several chemical classes), above all when the concentration is lower than the detection limit of the technique used for the measurement. In this work, 2-butanone, alpha-pinene, tetrachloroethylene, dimethyldisulfide, beta-pinene, limonene, phenol and benzoic acid are determined, because they are representative of some important classes of compounds with higher odor impact. The compounds are sampled with thermal desorbable radial diffusive samplers Radiello containing Tenax cartridges. The analytical repeatability and the complete thermal desorption of the cartridges were verified for each odor compound; the relative standard deviations for repeated samples and the recovery percentage were, respectively, less than 7% and about 97% for all compounds. The measurements of the linearity of sampling showed no systematic difference according to the collection period. The comparison between the odor threshold and the limit of detection demonstrated that this method is reliable for the recognition and quantification of odor compounds, allowing Public Administration to impose legal limits and the control agencies to verify them.     

Kinetic Study of Naphthalene Biodegradation in Aerobic Slurry Phase Microcosms for the Optimisation of the Process

The research was focused on the slurry-phase biodegradation of naphthalene. The biodegradation process was optimised with preliminary experiments in slurry aerobic microcosms. From soil samples collected on a contaminated site, a Pseudomonas putida strain, called M8, capable to degrade naphthalene was selected. Microcosms were prepared with M8 strain by mixing non-contaminated soil and mineral M9 medium. Different experimental conditions were tested varying naphthalene concentration, soil:water ratio and inoculum density. The disappearance of hydrocarbon, the production of carbon dioxide, and the ratio of total heterotrophic and naphthalene-degrading bacteria were monitored at different incubation times. The kinetic equation that best fitted the disappearance of contaminant with time was determined. The results showed that the isolated strain enhanced the biodegradation rate with respect to the natural biodegradation.     

A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers

This work is aimed to study the suitability of the wooden backbone of Opuntia ficus indica cladodes as reinforcement for the production of bio-composites. The wooden backbone can be extracted from O. ficus indica cladodes, which constitute a very relevant agricultural scrap, and is characterized by a thick walled cellular structure. In view of its potential in poly-lactic acid (PLA) matrix bio-composite production, two different possible applications were examined. In the first alternative, the wooden backbone was used in replacement of flax fibers for the production of fully consolidated bio-composites. Results obtained have shown that, though being characterized by lower properties compared to those of flax fiber composites, the opuntia actually works as an efficient reinforcement for PLA/wood flour matrix, increasing the flexural strength and elongation at break. In the second alternative, the cellular structure was used for the production of a sandwich bio-composite with a PLA/wood flour skin. In this case, the very high interlaminar adhesion strength between the skin and the core was considered as an indication of the potentiality of this material for the production of high strength sandwich structures. As a confirmation of this, no interlaminar debonding was observed during short beam tests.     

The effects of familiarity and gender on spatial representation

This paper reports a study of how familiarity and gender may influence the frames of reference used in memory to represent a real-world regularly shaped environment. Familiar and unfamiliar participants learned the locations of three triads of buildings by walking on a path which encircled each triad. Then they were shown with maps reproducing these triads at five different orientations (from 0° to 180°) and had to judge whether each triad represented correctly the relative positions between the buildings. Results showed that unfamiliar participants performed better when the orientation of triads was closer to the learning perspective (0° and 45°) and corresponded to front rather than to back positions. Instead, familiar participants showed a facilitation for triads oriented along orthogonal axes (0°–180°, 90°) and no difference between front and back positions. These findings suggested that locations of unfamiliar buildings were mentally represented in terms of egocentric frames of reference; instead, allocentric frames of reference defined by the environment were used when the environment was familiar. Finally, males were more accurate and faster than females, and this difference was particularly evident in participants unfamiliar with the environment.