膜电解技术处理含氯及重金属的废酸

采用离子交换膜电解技术处理铜冶炼过程产生的含氯及重金属的废酸。考察了废酸处理工艺、电解温度、电解时间、电流密度和催化剂的添加等条件对处理效果的影响。实验结果表明：采用先沉淀重金属后脱氯的废酸处理工艺,氯离子和铜离子的去除效果均较好;当以钛盐为催化剂时,在电解温度为40 ℃、电解时间为2.0 h、电流密度为825 A/m²的最佳工艺条件下,处理后废酸中的氯离子质量浓度为0.22 g/L,氯离子去除率为98.59%,铜离子质量浓度为0.45 g/L,铜离子去除率为95.08%,其他重金属大部分也得到有效去除。净化后的废酸可回用至铜冶炼的生产过程中。     

Measurement of Volatile Organics at Part per Billion Concentrations Using a Cold Trap Inlet and High Speed Gas Chromatography

Direct inlet gas chromatography (GC) is becoming one of the most frequently used techniques for measurement of volatile organics in air. Although GC is an effective tool, its usefulness as a field method can be limited by retention times of several minutes or more, and by the limits of detection. In order to address these issues, a high speed GC system featuring a capillary cold trap inlet and variable speed electrometeramplifier was developed and tested.

The gas cooled inlet was used to collect and focus organic vapors from injection volumes of up to 1 ml. Resistance heating of the metal cold trap produced a narrow injection band that allowed simple separations to be completed in 5 to 20 seconds. Use of a variable speed electrometer-amplifier allowed the response time and noise suppression characteristics to be adjusted to the needs of the specific analysis.

Simple mixtures of organics including aromatics, alkanes and chlorinated hydrocarbons were separated in 20 seconds or less. The limits of detection for 13 test compounds ranged from less than 1 part per billion by volume (ppbv) to about 50 ppbv. Data presented here indicate that high speed GC using a cold trap inlet may be a feasible approach for near real-time measurement of volatile organics in ambient air.     

The Kinetics of Catalytic Incineration of Dimethyl Sulfide and Dimethyl Disulfide over an MnO/Fe2O3 Catalyst

ABSTRACT

The catalytic incineration of dimethyl sulfide and dimethyl disulfide [(CH₃)₂S and (CH₃)₂S₂] over an MnO/Fe₂O₃ catalyst was carried out in a bench-scale catalytic incinerator. Three kinetic models (i.e., the power-rate law, the Mars and Van Krevelen model, and the Langmuir-Hinshelwood model) were used to analyze the results. A differential reactor design was used for best fit of kinetic models in this study. The results show that the Langmuir-Hinshelwood model may be feasible to describe the catalytic incineration of (CH₃)₂S and (CH₃)₂S₂. This suggests that the chemical adsorption of O₂ molecules is important in this incineration.     

Analyzing coastal wetland change in the Yancheng National Nature Reserve,China

Coastal zones provide habitat cores and corridors that maintain the diversity of entire landscapes, and they can form the cornerstone elements of regional conservation strategies. Natural environmental driving factors and excessive anthropogenic activities play important roles in coastal wetland change. Many studies have used remote sensing images to map and assess coastal wetland change on local or regional scales. This paper aims to provide insight into coastal wetland change in the Yancheng National Nature Reserve (YNNR) using remote sensing technology and landscape metrics analysis. The results reveal that grass flat and reed areas have significantly decreased, whereas agriculture fields, aquaculture ponds and built-up areas have continuously increased from 1988 to 2006. The spatial pattern of the coastal landscape has become fragmented and heterogeneous under great pressure from rapid economic development and population growth. The wetland changes have important impacts on natural habitat of the red-crowned cranes. The results of this study provide basic information that is required for developing measures toward a sustainable management and conservation of the YNNR.     

Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

PCDDs and PCDFs in sewage sludges from two wastewater treatment plants in Beijing, China

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were analyzed by an isotope-dilution high-resolution mass spectrometric in 16 sewage sludges, sampled from 2004 to 2009, from two municipal wastewater treatment plants (WWTPs) in Beijing. Total toxicity equivalent (TEQ) values were evaluated using the toxicity equivalent factors proposed by International for PCDD/Fs. The I-TEQs for these sewage sludges were from 0.97 to 15.0 pg g⁻¹ dry weight (dw) with a mean value 4.43 pg g⁻¹ dw, indicating that all I-TEQs were below Chinese legislation limit value regulated for agricultural use in soils.The results from limited samples (16 samples) showed that the levels of PCDD/Fs might be correlated with the sludge age. Meanwhile, the temporal trends of PCD/Fs suggested that the I-TEQs may correlate with rainfall in the present study.     

Influence of soluble microbial products (SMP) on wastewater disinfection byproducts: trihalomethanes and haloacetic acid species from the chlorination of SMP

Introduction  

Effluent organic matter from biological wastewater treatment plants is composed of degradation products and soluble microbial products (SMP). Protein, polysaccharide, humic acid, and DNA were major biomolecules of SMP. Little is known about the effects of SMP as microbially derived precursors on disinfection byproduct formation and speciation in biologically treated wastewater. In addition, there has never been any attempt to directly chlorinate the major biomolecules of SMP.     

焦化行业SO2排放现状及减排潜力分析

随着钢铁工业的高速发展,高温炼焦已成为中国煤炭资源利用的重要途径之一,与此同时焦化行业SO2排放污染问题越来越引起人们的关注.2007年,全国焦炭产量总计335.53 Mt,其中机械化焦炉产量达305.37 Mt,约占全国焦炭产量的91.01%,焦化行业SO2排放量达181.19 kt.在参考国家制定的焦化行业未来产业...     

Column study of Cr(VI) removal by cationic hydrogel for in-situ remediation of contaminated groundwater and soil

Column experiments were conducted for examining the effectiveness of the cationic hydrogel on Cr(VI) removal from groundwater and soil. For in-situ groundwater remediation, the effects of background anions, humic acid (HA) and pH were studied. Cr(VI) has a higher preference for being adsorbed onto the cationic hydrogel than sulphate, bicarbonate ions and HA. However, the adsorbed HA reduced the Cr(VI) removal capacity of the cationic hydrogel, especially after regeneration of the adsorbents, probably due to the blockage of adsorption sites. The Cr(VI) removal was slightly influenced by the groundwater pH that could be attributed to Cr(VI) speciation. The 6-cycle regeneration and reusability study shows that the effectiveness of the cationic hydrogel remained almost unchanged. On average, 93% of the adsorbed Cr(VI) was recovered in each cycle and concentrated Cr(VI) solution was obtained after regeneration. For in-situ soil remediation, the flushing water pH had an insignificant effect on the release of Cr(VI) from the soils. Multiple-pulse flushing increased the removal of Cr(VI) from the soils. In contrast, more flushing water and longer operation may be required to achieve the same removal level by continuous flushing.     

Fenton-双泥SBR工艺深度处理难降解反渗透浓缩液

采用Fenton试剂处理反渗透浓缩渗滤液(简称浓缩液),并探讨了双泥SBR工艺对Fenton处理后浓缩液与人工配水混合处理的可行性.结果表明,Fenton氧化对COD、TN和NH3-N的平均去除率分别为43.5%、22.5%和19.5%.对溶解性有机物(DOMs)的去除率为52.5%,其中胡敏酸(HA)、富里酸(FA)...