起重机械作业人员职业适性检测指标研究

采用Ｄｅｌｐｈｉ法对起重机械作业人员职业适性指标进行了研究。咨询专家就各备择指标对工作重要性及发生事故的关系进行了评估。结果表明：专家积极程度与意见集中程度良好；事故重要性与工作重要性排序一致性良好，两者呈高度正相关。依据专家对“重要性”的排序，再通过专家会议与现场考证等方法，最终确定了起重机械作业人员职业适性检测指标体系。     

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Environmental Science and Pollution Research - Most prevailing processes are incapable of removing Cr(III)-organic complexes efficiently and facing the problem of in-process formation of highly...     

区域差异下农业用水效率对农业用水量的影响

基于全国30个省份1998~2015年面板数据,采用Super-SBM模型测算农业用水效率,并在观察农业用水量、农业用水效率动静态演进特征的基础上,利用门槛面板回归模型探究农业用水效率对农业用水量的影响。结果表明,全国农业用水量和农业用水效率均呈阶段性下降。农业用水效率对降低农业用水量具有显著的门槛效应,提高农业用水效率是降低农业用水量的有效途径;东部农业用水效率促进农业用水量下降,但须警惕"回弹效应";中部农业用水效率抑制农业用水量增长,且作用逐渐增强;西部农业用水效率提高能够快速降低农业用水量,但作用逐渐减弱。另外,提升农民受教育水平、增加绿水足迹、扩大农业劳动人口能够降低农业用水量,而丰富的水资源禀赋促进农业用水量增加。     

Aerosol optical properties of regional background atmosphere in Northeast China

Aerosol optical properties from 2005 to 2008 at the Longfengshan regional background station in Northeast China were measured and analyzed. The annual mean of aerosol optical depth (AOD) at 440 nm for the four years was about 0.27 ± 0.25, 0.39 ± 0.37, 0.35 ± 0.34, and 0.38 ± 0.38, respectively, and the corresponding annual mean for the Angstrom exponent between 440 nm and 870 nm was about 1.43 ± 0.48, 1.23 ± 0.37, 1.53 ± 0.47, and 1.55 ± 0.42. The average monthly AOD_440nm showed similar seasonal variation with a maximum in spring and a minimum in autumn. The monthly means of AOD at 440, 675, 870 and 1020 nm increase from the January to March with the maxima about 0.77 ± 0.04, 0.65 ± 0.04, 0.58 ± 0.06, 0.57 ± 0.07, respectively and decrease from September to February with the minima about 0.32 ± 0.12, 0.22 ± 0.09, 0.15 ± 0.08, and 0.13 ± 0.07 in January. The monthly mean of Angstrom exponent shows a minimum in March (0.97 ± 0.52) and a maximum in September (1.66 ± 0.29). Both the AOD and Angstrom exponent presents single peak distributions of occurrence frequencies. The Longfenshan data showed high AODs (>1.00) both clustering in the fine mode growth wing and the coarse mode. Two typical cases under dust and haze conditions showed that the AOD under dusty day decreased from 2.20 to 1.20 and the Angstrom exponent increased from 0.10 to 1.00. On the contrast, the AOD under haze day remained relatively stable about 0.90 and the Angstrom exponent was around 1.40. The 3-day backtrajectory analysis at Longfengshan illustrated that the air-masses near ground on the dust day were from Bohai Sea and passed through Liaodong Peninsula and Northeast plain in China. But the air-masses on 500 m AGL were originated from western Mongolia and crossed Gobi deserts, Otindag Sand Land and Horqin Sand Land in Northeast China. The air-masses at Longfengshan near ground 500 m and 1000 m AGL on the haze days were from North China Region and passed through Northeast Heavy Industrial Base in Northeast China.     

Morphological characteristics of waste polyethylene/polypropylene plastics during pyrolysis and representative morphological signal characterizing pyrolysis stages

In this work, the morphological characteristics of waste polyethylene (PE)/polypropylene (PP) plastics during their pyrolysis process were investigated, and based on their basic image changing patterns representative morphological signals describing the pyrolysis stages were obtained. PE and PP granules and films were used as typical plastics for testing, and influence of impurities was also investigated. During pyrolysis experiments, photographs of the testing samples were taken sequentially with a high-speed infrared camera, and the quantitative parameters that describe the morphological characteristics of these photographs were explored using the “Image Pro Plus (v6.3)” digital image processing software. The experimental results showed that plastics pyrolysis involved four stages: melting, two stages of decomposition which are characterized with bubble formation caused by volatile evaporating, and ash deposition; and each stage was characterized with its own phase changing behaviors and morphological features. Two stages of decomposition are the key step of pyrolysis since they took up half or more of the reaction time; melting step consumed another half of reaction time in experiments when raw materials were heated up from ambient temperatures; and coke-like deposition appeared as a result of decomposition completion. Two morphological signals defined from digital image processing, namely, pixel area of the interested reaction region and bubble ratio (BR) caused by volatile evaporating were found to change regularly with pyrolysis stages. In particular, for all experimental scenarios with plastics films and granules, the BR curves always exhibited a slowly drop as melting started and then a sharp increase followed by a deep decrease corresponding to the first stage of intense decomposition, afterwards a second increase – drop section corresponding to the second stage of decomposition appeared. As ash deposition happened, the BR dropped to zero or very low values. When impurities were involved, the shape of BR curves showed that intense decomposition started earlier but morphological characteristics remained the same. In addition, compared to parameters such as pressure, the BR reflects reaction stages better and its change with pyrolysis process of PE/PP plastics with or without impurities was more intrinsically process correlated; therefore it can be adopted as a signal for pyrolysis process characterization, as well as offering guide to process improvement and reactor design.     

三峡水库水环境中内分泌干扰物TBT的多介质迁移和归趋模拟

运用环境多介质QWASI等量浓度模型模拟了三峡水库水环境中内分泌干扰物TBT在各环境介质中的浓度分布及迁移归趋,同时讨论了三峡水库运行方式对库区水环境中TBT环境行为的影响.结果表明,QWASI模型能够较为合理地给出各个物理化学过程的速率参数,可对TBT在三峡水库这种超大型河道型水库中跨介质间的迁移传输、各环境相分布等作出定性和定量的模拟估计,模型输出结果与实测结果较为吻合.研究表明,三峡水库的运行方式对TBT在库区水环境中沉积物和水相间的迁移转化有重要影响.     

利用Cu-Fe复合金属氧化物净化水中的磷

研究了利用Cu-Fe复合金属氧化物净化水中磷的过程。实验结果表明,在吸附剂的制备过程中,加入Cu可以显著提高吸附剂对水中磷的净化效率,Cu的适宜加入量为Cu/Fe摩尔比1∶2。在磷净化过程中,p H值对Cu-Fe复合金属氧化物的净化效率有显著影响,较低的p H值有利于磷的净化;水中磷的净化率随吸附剂用量的增加而增加,适宜的投加量为0.2 g/100 m L;吸附剂对水中磷的净化速度较快,磷的吸附率在5 min内达到87.08%,吸附2 h达到平衡,磷的净化率为98.85%;Cu-Fe复合金属氧化物净化水中磷的吸附等温线符合Langmuir方程,磷的最大吸附量为11.36 mg/g。     

5种化学品对丽斑麻蜥和日本鹌鹑的毒性研究

目前,在化学品生态风险评价体系中对爬行动物的毒性效应研究较少。本研究参考鸟类急性经口毒性试验建立了我国本土爬行动物——丽斑麻蜥(Eremias argus)的急性毒性测试方法,来评价化学品对爬行动物和鸟类的毒性效应之间的差异。选择异氰酸酯、1,2-苯并异噻唑-3-酮、2,4-二氯苯酚、苯并噻唑和二苯甲酮5种化学品分别对丽斑麻蜥进行暴露实验,并与鸟类模式物种——日本鹌鹑(Coturnix japonica)的急性毒性结果进行比较。结果发现异氰酸酯和苯并噻唑对丽斑麻蜥7 d的半数致死剂量(7 d-LD50)分别为125 mg·kg~(-1)和500 mg·kg~(-1),而对日本鹌鹑的7 d-LD50值分别为27 mg·kg~(-1)和37 mg·kg~(-1);1,2-苯并异噻唑-3-酮、2,4-二氯苯酚和二苯甲酮对丽斑麻蜥的7 d-LD50值分别为909 mg·kg~(-1)、787 mg·kg~(-1)和528 mg·kg~(-1),而对日本鹌鹑7 d-LD50值均大于剂量上限1 000 mg·kg~(-1)。结果表明,丽斑麻蜥和日本鹌鹑对相同化学品的毒性敏感性是存在差异的,用鸟类来评价化学品对爬行动物的潜在风险可能不够准确,应该重视化学品对爬行动物的毒性效应研究。同时,以本土爬行动物的代表物种丽斑麻蜥作为化学品环境风险评价的模式生物,对保护我国本土物种及其多样性、维持生态平衡具有重要意义。     

磁性Fe3O4/石墨烯异质结固定漆酶特性及其对水中双酚A的降解研究

以磁性石墨烯为载体制备了磁性石墨烯固定化漆酶,考察了固定化漆酶的酶学特性及其对双酚A（BPA）的降解效能。结果表明,氧化石墨烯的比表面积高达726.34 m2·g-1,与游离漆酶相比,经过石墨烯固定化后漆酶对酸的适应能力、耐热性和贮存稳定性均有所提高,pH值2.0~4.0范围内固定化漆酶活性较为稳定;加入变性剂尿素（1 mol·L-1）后,固定化漆酶的相对活性为87%,游离漆酶相对活性仅为63.02%,固定化导致抗变性剂能力增强。固定化漆酶和游离漆酶活性分别在45和40℃时达到最大值。与游离漆酶相比,固定化漆酶最佳反应温度升高了5℃,且在50℃时,固定化漆酶的相对活性依然保持在95.11%;25℃,pH值4.0条件下保存10 d,固定化漆酶活性为最初活性的82.57%;固定化漆酶具有良好的重复利用性,重复利用10次后,漆酶活性仍为最初活性的82.01%。固定化酶的米氏常数Km为5.38×10-4 mol·L-1,较游离酶的大,说明固定化酶与底物的亲和力比游离酶小。磁性石墨烯固定化漆酶具有良好的吸附能力,可吸附-催化氧化水中的 BPA,且石墨烯良好的吸附作用促进了催化反应,水中BPA质量浓度为15 mg·L-1时,经过18 h反应,BPA的去除率能达到82.14%左右。本研究的结果为石墨烯新型材料固定化漆酶及其应用提供了参考。