4种重金属离子对间接火焰原子吸收光谱法测定铝的干扰

空气-乙炔间接火焰原子吸收法是我国目前运用较多且易于推广的铝检测方法,研究了Mg2+、Ca2+、Zn2+和Ni2+4种离子对此法测定0.40 mg/L Al3+的干扰情况。得出如下结论:(1)在±5%误差范围内,15.10 mg/L Mg2+、105.00mg/L Ca2+、0.23 mg/L Zn2+、0.88 mg/L Ni2+对0.40 mg/L Al3+无干扰。(2)本方法虽然操作复杂,但成本较低、灵敏度高,检测的浓度范围宽、稳定性好,加标回收率为96%~99%,检出限为0.04 mg/L,适宜测定范围为0.05~100.00 mg/L,适用于饮用水、河水及地下水中Al3+的测定。     

Enhanced sorption of perfluorooctane sulfonate (PFOS) on carbon nanotube-filled electrospun nanofibrous membranes

Multi-walled carbon nanotube-filled electrospun nanofibrous membranes (MWCNT-ENFMs) were prepared by electrospinning. The addition of MWCNTs (0.5 wt.% vs. ENFMs) doubled the specific surface area and tensile strength of the ENFMs. The MWCNT-ENFMs were used to adsorb perfluorooctane sulfonate (PFOS) in aqueous solutions. The sorption kinetics results showed that the sorption rate of PFOS onto the MWCNT-ENFMs was much higher than the sorption rate of PFOS onto the pure ENFMs control, and the pseudo-second-order model (PSOM) described the sorption kinetics well. The sorption isotherms indicated that the sorption capacity of the MWCNT-ENFMs for PFOS (16.29 ± 0.26 μmol g⁻¹) increased approximately 18 times, compared with the pure ENFMs (0.92 ± 0.06 μmol g⁻¹). Moreover, the solution pH significantly affected the sorption efficiency and sorption mechanism. The MWCNT-ENFMs were negatively charged from pH 2.0–10.0, but the electrostatic repulsion between the MWCNT-ENFMs and PFOS was overcome by the hydrophobic interactions between PFOS and the MWCNTs or nanofibers. The strong hydrophobic interactions between PFOS and the MWCNTs played a dominant role in the sorption process. For the pure ENFMs, the electrostatic repulsion was conquered by the hydrophobic interactions between PFOS and the nanofibers at pH > 3.1. In addition to the hydrophobic interactions, an electrostatic attraction between PFOS and the pure ENFMs was involved in the sorption process at pH < 3.1.     

纳米零价铁/玉米淀粉的制备及其对Pb2+的吸附

以玉米淀粉为载体,采用液相还原法制备纳米零价铁/玉米淀粉,并用于溶液中Pb2+的去除。采用SEM技术对吸附材料进行了表征。考察了溶液pH、纳米零价铁/玉米淀粉加入量、初始Pb2+质量浓度、反应时间等因素对Pb2+吸附效果的影响。表征结果显示,纳米零价铁/玉米淀粉球体间主要呈链状连接,不仅保持了纳米零价铁的特性,且颗粒的团聚现象明显减少。实验结果表明,在溶液pH 7.0、纳米零价铁/玉米淀粉加入量0.8 g/L、初始Pb2+质量浓度50 mg/L、反应时间60 min的条件下,纳米零价铁/玉米淀粉对Pb2+具有较好的吸附效果,Pb2+去除率为93.17%、吸附量为47.27 mg/g。     

Adsorption characteristics of Cu(II) from aqueous solution onto biochar derived from swine manure

The purpose of this study was to investigate adsorption characteristic of swine manure biochars pyrolyzed at 400 °C and 700 °C for the removal of Cu(II) ions from aqueous solutions. The biochars were characterized using BET surface area, Fourier transform infrared spectroscopy (FTIR), zeta potential, scanning electron microscopy/energy dispersive spectrometer (SEM–EDS), and X-ray diffraction (XRD). The adsorption of Cu(II) ions by batch method was carried out and the optimum conditions were investigated. The adsorption processes of these biochars are well described by a pseudo-second-order kinetic model, and the adsorption isotherm closely fitted the Sips model. Thermodynamic analysis suggested that the adsorption was endothermic. The maximum Cu(II) adsorption capacities of biochars derived from fresh and composted swine manure at 400 °C were 17.71 and 21.94 mg g^?1, respectively, which were higher than those at 700 °C. XRD patterns indicated that the silicate and phosphate particles within the biochars served as adsorption sites for Cu(II). The removal of Cu(II) ions from industrial effluent indicated that the fresh swine manure biochar pyrolyzed at 400 °C can be considered as an effective adsorbent.     

Evaluating the exchange of DDTs between sediment and water in a major lake in North China

A large-scale sampling program was conducted to simultaneously collect surface water, overlying water, pore water, and sediment samples at monthly intervals between March and December 2010 from Baiyangdian Lake, North China to assess the distribution of DDTs and determine the net direction of sediment–water exchange. Total DDT concentrations ranged 2.36–22.4 ng/L, 0.72–21.9 ng/L, 2.25–33.7 ng/L, and 4.42–7.29 ng/g in surface water, overlying water, pore water, and sediments, respectively, which were at the intermediate levels compared to those of other area around the world. Seasonal variations of DDTs were featured by higher concentration in summer. This was likely associated with (a) the increase of land runoff in the summer and (b) application of dicofol and DDT-containing antifouling paints for ships in summer. Sediment–water fugacity ratios of the DDT isomers were used to predict the direction of the sediment–water exchange of these isomers. The sediment–surface water, sediment–overlying water, and sediment–pore water fugacity ratios of DDT isomers averaged 0.34, 0.44, and 0.1, which are significantly lower than the equilibrium status (1.0), suggesting that the net flux direction were from the water to sediment and the sediment acted as a sink for the DDTs. The difference of DDT concentrations between sediment and water samples was found to be an important factor affecting the diffusion of DDT from the water to sediment.     

Selective separation of deltamethrin by molecularly imprinted polymers using a β-cyclodextrin derivative as the functional monomer

A deltamethrin-imprinted polymer (MIP₁) was prepared using bis(-6-O-butanediacid monoester)-β-cyclodextrin (BBA-β-CD) as the functional monomer and toluene 2,4-diisocyanate (TDI) as the cross-linker. In comparison to the molecularly imprinted polymer where β-CD was applied as the functional monomer (MIP₂), MIP₁ showed a higher specific binding capacity (ΔC_P) and an improved imprinting factor (IF) for deltamethrin. The selective recognition experiments demonstrated that compared to MIP₂, MIP₁ could better recognize its template over other substrates that had similar chemical structures. The solid phase extraction (SPE) of deltamethrin using MIP₁ as the adsorbent was further investigated. The recoveries of the molecularly imprinted solid phase extraction (MISPE) column for deltamethrin were 83.2–93.4% with relative standard deviations (RSD) of 2.03–6.19%. The method has been successfully applied to the enrichment of trace deltamethrin from real water samples.     

TiO2镀膜电极光电催化降解酸性紫红

采用溶胶-凝胶法在钛片上涂覆TiO2薄膜为电极,自行设计组装光电催化反应器,对酸性紫红染料废水进行光电脱色处理,探讨了光电反应的协同性并研究了初始染料浓度、电压、pH和电解质浓度对脱色反应的影响。结果表明,光化学催化和电化学氧化具有协同效应,单一紫外光催化和单一电催化酸性紫红的脱色率分别为44.27%和13.12%,而光电催化(紫外、外加电压10 V)的脱色率达到77.18%。初始浓度较低、电压适中、pH偏碱性时,酸性紫红废水脱色率较高;电解质对脱色反应有促进作用,且浓度越高,酸性紫红脱色率越高。     

海绵铁还原耦合活性炭吸附-微波再生技术降解甲基橙

采用海绵铁(s-Fe0)还原耦合活性炭(GAC)吸附-微波(MW)再生技术降解甲基橙(MO)溶液,重点考察了s-Fe0投加量、粒径、微波功率等因素对MO去除效果的影响。结果表明,s-Fe0投加剂量为15.0 g/L、粒径为3～5 mm、超声波功率为200 W,反应1 h,MO的去除率为94.2%。其次,采用GAC吸附-MW再生技术(800 W,照射1 min)循环处理上述脱色后的MO废水。结果表明,GAC吸附可有效降低废水的生物毒性及残留的染料、TOC和总铁离子浓度,且MW辐射可有效再生吸附饱和的GAC颗粒。因此,s-Fe0还原耦合GAC吸附-MW再生技术可以有效降解MO染料,具有处理效果好、实现资源循环利用等优点。     

改性玉米芯吸附溶液中的铀

以KMnO4改性玉米芯为吸附剂来吸附溶液中的铀,并与未改性玉米芯的吸附能力进行比较。考察了玉米芯用量、溶液pH值、铀初始质量浓度以及吸附时间等因素对铀吸附效果的影响。实验结果表明,当溶液pH=5.5、改性玉米芯用量为0.12 g、未改性玉米芯用量为0.2 g、铀初始质量浓度为30 mg/L、接触时间为2.5 h时,改性玉米芯对铀的去除率为93.54%,未改性玉米芯对铀的去除率为59.68%,改性玉米芯对铀的吸附效果明显优于未改性玉米芯。     

免烧结粉煤灰陶粒BAF对乙烯化工废水的深度处理效果

以粉煤灰为主要原料制备了免烧结粉煤灰陶粒,并将其作为曝气生物滤池(BAF)的填料用于深度处理乙烯化工厂二级生化出水。实验结果表明,在平均进水COD为54.62mg/L、平均SS为33.93mg/L、平均ρ(NH3-N)为1.33mg/L的条件下,自制免烧结粉煤灰陶粒BAF平均COD去除率为57.14%,平均SS去除率为68.64%,平均NH3-N去除率为74.89%,均略高于普通商业陶粒BAF。自制免烧结粉煤灰陶粒BAF最佳反冲洗周期为2d,并具有反冲洗耗水量小、反冲洗效果好的优势。