The influence of lower extremity postures on kinematics and injuries of cyclists in vehicle side collisions

Objective: A cyclist assumes various cyclic postures of the lower extremities while pushing the pedals in a rotary motion while pedaling. In order to protect cyclists in collisions, it is necessary to understand what influence these postures have on the global kinematics and injuries of the cyclist.

Method: Finite element (FE) analyses using models of a cyclist, bicycle, and car were conducted. In the simulations, the Total Human Model of Safety (THUMS) occupant model was employed as a cyclist, and the simulation was set up such that the cyclist was hit from its side by a car. Three representative postures of the lower extremities of the cyclist were examined, and the kinematics and injury risk of the cyclist were compared to those obtained by a pedestrian FE model. The risk of a lower extremity injury was assessed based on the knee shear displacement and the tibia bending moment.

Results: When the knee position of the cyclist was higher than the hood leading edge, the hood leading edge contacted the leg of the cyclist, and the pelvis slid over the hood top and the wrap-around distance (WAD) of the cyclist's head was large. The knee was shear loaded by the hood leading edge, and the anterior cruciate ligament (ACL) ruptured. The tibia bending moment was less than the injury threshold. When the cyclist's knee position was lower than the hood leading edge, the hood leading edge contacted the thigh of the cyclist, and the cyclist rotated with the femur as the pivot point about the hood leading edge. In this case, the head impact location of the cyclist against the car was comparable to that of the pedestrian collision. The knee shear displacement and the tibia bending moment were less than the injury thresholds.

Conclusion: The knee height of the cyclist relative to the hood leading edge affected the global kinematics and the head impact location against the car. The loading mode of the lower extremities was also dependent on the initial positions of the lower extremities relative to the car structures. In the foot up and front posture, the knee was loaded in a lateral shear direction by the hood leading edge and as a result the ACL ruptured. The bicycle frame and the struck-side lower extremity interacted and could influence the loadings on lower extremities.     

Biological removal of selenate in saline wastewater by activated sludge under alternating anoxic/oxic conditions

Removal of selenate in saline wastewater by activated sludge was examined. Sequencing batch reactor was operated under alternating anoxic/oxic conditions. Above 97% removal of soluble selenium (Se) was achieved continuously. Major Se removal mechanism varied depending on the length of aeration period. Various Se-reducing bacteria likely contributed to coordinately to Se removal. Selenium (Se)-containing industrial wastewater is often coupled with notable salinity. However, limited studies have examined biological treatment of Se-containing wastewater under high salinity conditions. In this study, a sequencing batch reactor (SBR) inoculated with activated sludge was applied to treat selenate in synthetic saline wastewater (3% w/v NaCl) supplemented with lactate as the carbon source. Start-up of the SBR was performed with addition of 1–5 mM of selenate under oxygen-limiting conditions, which succeeded in removing more than 99% of the soluble Se. Then, the treatment of 1 mM Se with cycle duration of 3 days was carried out under alternating anoxic/oxic conditions by adding aeration period after oxygen-limiting period. Although the SBR maintained soluble Se removal of above 97%, considerable amount of solid Se remained in the effluent as suspended solids and total Se removal fluctuated between about 40 and 80%. Surprisingly, the mass balance calculation found a considerable decrease of Se accumulated in the SBR when the aeration period was prolonged to 7 h, indicating very efficient Se biovolatilization. Furthermore, microbial community analysis suggested that various Se-reducing bacteria coordinately contributed to the removal of Se in the SBR and main contributors varied depending on the operational conditions. This study will offer implications for practical biological treatment of selenium in saline wastewater.     

Identification and characterization of coagulation inhibitor proteins derived from cyanobacterium Microcystis aeruginosa

The excess growth of cyanobacteria in semi enclosed water areas caused by eutrophication brings about coagulation inhibition in drinking water treatment processes. In this study, coagulation inhibitor proteins produced by Microcystis aeruginosa, a major cyanobacterium in algal bloom, were acquired by a phage display technique, an aluminum-immobilized affinity chromatography and a protein expression technique using Escherichia coli cells. Two cyanobacterial peptides with a high ratio of metallophilic amino acids were recovered, which were a part of homologues of a thiol oxidase enzyme Ero1p and a trans-acting repressor ArsR. It was also shown that the homologue of ArsR exhibited a stronger inhibitory effect on the coagulation of kaolin suspension with polyaluminum chloride than the control proteins. This is the first report to identify a cyanobacterial cell component to inhibit coagulation. The compositions of polar amino acids were critical to explain the strength of coagulation inhibition potential. Polar proteins from cyanobacteria could collectively consume coagulants or stabilize clay particles, which would be plausible explanations for causing coagulation inhibition. Meanwhile, results from the kaolin coagulation tests using the control proteins implied that the neutralization of positive charges of coagulant constituents by simple electrostatic interactions might not be the key mechanism on the protein-induced coagulation inhibition.     

A New Catalytic Reactor for Nitrogen Oxides Removal

The body of information presented in this paper is directed to those individuals concerned with the catalytic NO_x removal reactor for a dirty (containing dust) flue gas. In the case of treating a dirty flue gas, the concentration of dust is the most important factor. While the dirty gas passes through the catalytic reactor, dust particles deposit and plug up the catalyst causing the reactor pressure loss to rise. As a result, the NO_x reduction efficiency decreases more and more, and continuous operation becomes impossible. A new type of NO_x removal reactor for dirty flue gas, the intermittent moving bed reactor, has been developed. The following characteristics have been evaluated: (1) method of calculating reactor pressure loss caused by dust particles, (2) static pressure distribution across the catalyst bed in the reactor, (3) method of evaluating uniform movement of catalyst and (4) reentrainment pattern of dust by catalyst movement. After carrying out various successful pilot plant tests, the information needed for construction and operation of a commercial plant has been developed.     

Selective Reduction of Nitrogen Oxides In Combustion Flue Gases

The body of Information presented in this paper is directed to those Individuals concerned with the removal of NO_x in combustion flue gases. A catalytic process for the selective reduction of nitrogen oxides by ammonia has been investigated. Efforts were made toward the development of catalysts resistant to SO_x poisoning. Nitrogen oxides were reduced over various metal oxide catalysts in the presence or absence of SO_x(SO₂ and SO₃). Catalysts consisting of oxides of base metals (for example, Fe₂O₃) were easily poisoned by SO₃, forming sulfates of the base metals. A series of catalysts which are not susceptible to the SO_x poisoning has been developed. The catalysts possess a high activity and selectivity over a wide range of temperatures, 250—450°C. The catalysts were tested in a pilot plant which treated a flue gas containing 110-150 ppm NO_x, 660-750 ppm SO₂, and 40-90 ppm SO₃. The pilot plant was operated at 350°C and at a space velocity of 10,000 h^-1. The removal of nitrogen oxides was more than 90% for several months.

A mechanism of the NO-NH₃ reaction has also been investigated. It is found that NO reacts with NH₃ at a 1:1 mole ratio in the presence of oxygen and the reaction is completely inhibited by the absence of oxygen. The experimental data show that the NO-NH₃ reaction in the presence of oxygen is represented byNO + NH₃ + 1/4 O₂ = N₂ + 3/2 H₂O.     

Hydrodynamic forces on emergent cylinders in non-uniform flow

Environmental Fluid Mechanics - The main objective of conducting numerical simulations of flows in rivers with vegetation is to investigate the complex flow dynamics involved in non-equilibrium...     

Use of two population metrics clarifies biodiversity dynamics in large-scale monitoring: the case of trees in Japanese old-growth forests

An alkaline comet assay and a micronucleus test were carried out on erythrocytes of the European chub, Squalius cephalus L., collected in spring and autumn in 2005 and 2006 at three sampling sites in River Sava, near Zagreb, Croatia. The results of comet assay showed the lowest genotoxic influence at the least polluted site, while higher DNA damage was observed at the polluted sites. Although the basal levels of DNA damage were elevated, a clear gradation of DNA damage was found due to pollution intensity in all sampling periods. The lowest cytogenetic damage as revealed by the micronucleus test (MNT) was observed as well at the least polluted site. High variations in MN frequency were observed between sampling periods, although the number of micronucleated erythrocytes was consistently the highest one at the polluted site. The comet assay as a biomarker of genotoxic effect exhibited higher sensitivity in discriminating the genotoxic capacity of studied polluted sites while the MNT was less sensitive. However, both tests should be used together in biomonitoring studies because they can reveal different aspects of DNA damage; comet assay, the early event of genotoxic exposure, and MNT, its final result as a mutagenic potential.     

Modeling mitigation strategies for toxic cyanobacteria blooms in shallow and eutrophic Lake Kasumigaura, Japan

This paper explores mitigation scenarios for toxic cyanobacteria blooms in Lake Kasumigaura is located about 60–90 km northeast of Tokyo, in the southeast of Ibaraki Prefecture, Japan. Dominant species of cyanobacteria (Microcystis aeruginosa, Microcystis viridis and Microcystis ichthyoblabe) produce highly potent toxins as (Microcystin-(Leucine + Arginine, MC-LR), Microcystin-(Arginine + Arginine, MC-RR) and Microcystin-(Tyrosine + Arginine, MC-YR) in the Lake. Toxin production is generally the result of two major factors-natural processes and human interferences. Both factors have an extreme influence on the generation of cyanobacteria toxins within lake ecosystems. To address these factors, we propose two concepts for mitigation. The first concept is intended for examining the natural process of toxin production behavior within the lake and the second concept is used for evaluating inflow of wastes and nutrients from human activities that form toxins. Our research aims to combine both strategies to mitigate impacts of toxins, by examining trends of cyanobacteria nutrient sources, buoyancy regulations that influence bloom formation, and the environmental conditions that spur blooms. This study proposes a simple IMPACT (Integrating Mitigation Policies for Aquatic Cyanobacteria Toxin) model for diminution strategies of harmful algal blooms and their toxins. A mixed-methods approach is employed, nested within the Environmental Systems Analysis (ESA) tools e.g. scenario analysis and stakeholder analysis. The quality of the lake is assessed through a combination of observation and field study analysis. The findings suggest that successful mitigation of cyanobacteria toxins is highly dependent on multi-functional, multi-stakeholder involvement, and relevant intergovernmental policy. Without integrating approaches among different stakeholders, diverse socioeconomic activists, local-national policymakers and effective policy measures, prevention of cyanobacteria toxin production within lakes becomes extremely complex and difficult. The proposed IMPACT model could be a decision framework for identifying suitable policies that mitigate cyanobacteria impacts.