Accelerated degradation of a variety of aromatic compounds by Spirodela polyrrhiza-bacterial associations and contribution of root exudates released from S. polyrrhiza

Removal experiments of phenol,aniline,2,4-dichlorophenol,nonylphenol and bisphenol A(BPA) using Spirodela polyrrhizabacterial associations revealed that all compounds but BPA underwent accelerated removal.The mechanisms differed depending on the substrates.It was found that S.polyrrhiza has a great ability to release phenolic compound-rich root exudates,and the exudates seem to stimulate bacterial degradation of a variety of aromatic compounds.     

Improvement of driver active interventions during automated driving by displaying trajectory pointers—A driving simulator study

Abstract

Objective: The handover of vehicle control from automated to manual operation is a critical aspect of interaction between drivers and automated driving systems (ADS). In some cases, it is possible that the ADS may fail to detect an object. In this event, the driver must be aware of the situation and resume control of the vehicle without assistance from the system. Consequently, the driver must fulfill the following 2 main roles while driving: (1) monitor the vehicle trajectory and surrounding traffic environment and (2) actively take over vehicle control if the driver identifies a potential issue along the trajectory. An effective human–machine interface (HMI) is required that enables the driver to fulfill these roles. This article proposes an HMI that constantly indicates the future position of the vehicle.

Methods: This research used the Toyota Dynamic Driving Simulator to evaluate the effect of the proposed HMI and compares the proposed HMI with an HMI that notifies the driver when the vehicle trajectory changes. A total of 48 test subjects were divided into 2 groups of 24: One group used the HMI that constantly indicated the future position of the vehicle and the other group used the HMI that provided information when the vehicle trajectory changed.

The following instructions were given to the test subjects: (1) to not hold the steering wheel and to allow the vehicle to drive itself, (2) to constantly monitor the surrounding traffic environment because the functions of the ADS are limited, and (3) to take over driving if necessary.

The driving simulator experiments were composed of an initial 10-min acclimatization period and a 10-min evaluation period. Approximately 10?min after the start of the evaluation period, a scenario occurred in which the ADS failed to detect an object on the vehicle trajectory, potentially resulting in a collision if the driver did not actively take over control and manually avoid the object.

Results: The collision avoidance rate of the HMI that constantly indicated the future position of the vehicle was higher than that of the HMI that notified the driver of trajectory changes, χ² = 6.38, P < .05. The steering wheel hands-on and steering override timings were also faster with the proposed HMI (t test; P < .05).

Conclusions: This research confirmed that constantly indicating the position of the vehicle several seconds in the future facilitates active driver intervention when an ADS is in operation.     

Arsenic and Mn levels in Isaza (Gymnogobius isaza) during the mass mortality event in Lake Biwa, Japan

The present study measured the concentrations of 25 elements (Li, Mg, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Mo, Ag, Cd, In, Sn, Sb, Cs, Ba, Hg, Tl, Pb and Bi) in the whole body of Isaza which is an endemic fish species to Lake Biwa, Japan, and compared the values in the specimens from the mass mortality Isaza (MMI) and normal fresh Isaza (NFI). The mean levels of Mn and total As (T-As) were relatively higher in MMI than in NFI. In the T-As, highly toxic inorganic As was detected in MMI. Moreover we found Mn and As concentrations in surface sediment were extremely high and temporally increased. From all these results, we could infer that the dissolution of Mn and As from surface sediment of Lake Biwa might have been one of the cause for the mass mortality of Isaza.     

Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and polychlorinated biphenyls in blood and breast milk collected from pregnant women in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (PCBs), and non-dioxin-like PCBs in paired samples of blood and breast milk collected from 67 secundiparas in Sapporo City, Japan, and combined this data with those of the 30 secundiparas previously measured. The arithmetic mean total toxic equivalents (TEQ-WHO) concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of the 97 secundiparous subjects were 3.0-23 (mean: 13, median: 14) and 2.7-20 (mean: 8.6, median: 8.5) pg TEQ g⁻¹ lipid, respectively. The sums of the concentrations of 56 non-dioxin-like PCB congeners that were measured in the subjects’ blood and breast milk were 16-326 (mean: 107, median: 100) and 12-252 (mean: 73, median: 67) ng g⁻¹ lipid, respectively. The partitioning ratios of individual congeners of PCDDs, PCDFs, dioxin-like PCBs, and non-dioxin-like PCBs from blood to breast milk in secundiparas were almost the same as those of primiparas that have been recently reported, suggesting that the partitioning ratios of these compounds from maternal blood to breast milk in women is little affected by delivery. Furthermore, the partition of PCB congeners with chlorine at the 2-, 3-, 4′-, and 5-positions or the 2-, 4-, 4′-, and 5-positions of the biphenyl ring from the blood to the breast milk tended to occur at a higher level than that of other congeners. In particular, the levels of tetraCB-74 and hexaCB-146 in the breast milk for both primiparous and secundiparous mothers were slightly higher than those in the blood.     

Trends in hazardous trace metal concentrations in aerosols collected in Beijing, China from 2001 to 2006

Daily observations of hazardous trace metal concentrations in aerosols in Beijing, China were made in the period from 2001 to 2006. We considered coal combustion as a major source of some anthropogenic metals by achieving a correlation analysis and by investigating enrichment factors and relative composition of metals. A possible extra source of some specific metals, such as Cu and Sb, was brake abrasion particles, however, we did not think the transport-related particle was a major source for the hazardous anthropogenic metals even though they could originate from vehicle exhaust and brake/tire abrasion particles. A time-trend model was used to describe temporal variations of chemical constituent concentrations during the five-year period. Several crustal elements, such as Al, Ti, V, Cr, Mn, Fe, and Co, did not show clear increases, with annual rates of change of -15.2% to 3.6%. On the other hand, serious increasing trends were noted from several hazardous trace metals. Cu, Zn, As, Cd, and Pb, which are derived mainly from anthropogenic sources, such as coal combustion, showed higher annual rate of change (4.9-19.8%, p<0.001) according to the regression model. In particular, the Cd and Pb concentrations increased remarkably. We hypothesize that the trend towards increasing concentrations of metals in the air reflects a change that has occurred in the process of burning coal, whereby the use of higher temperatures for coal combustion has resulted in increased emissions of these metals. The increasing use of low-rank coal may also explain the observed trends. In addition, nonferrous metal smelters are considered as a potential, albeit minor, reason for the increasing atmospheric concentrations of anthropogenic hazardous metals in Beijing city.     

Production of Poly(3-hydroxyalkanoate)s by Pseudomonas putida Cultivated in a Glycerol/Nonanoic Acid-Containing Medium

The biosynthesis of poly(3-hydroxyalkanoate) (PHA) by Pseudomonas putida (JCM6160) cultivated in a medium containing glycerol, nonanoic acid, or a glycerol/nonanoic acid mixture as the sole carbon sources was investigated. The PHA content was ~20 % when glycerol was the carbon source. This relatively low content can be attributed to the glycerol end-cap effect and the absence of enzymes that can directly synthesize PHA from acetyl CoA, which is the major metabolite of glycerol. Fatty acids, containing even numbered carbons, are synthesized from acetyl CoA, and they can be used as substrates for PHA synthesis. However, this process also results in decreasing PHA content as fatty acids are siphoned off into other pathways. However, addition of 5 mM nonanoic acid into a 20 mM glycerol-containing medium dramatically increased the PHA content in P. putida, which was 1.3 times larger than the sum of the values found when glycerol and nonanoic acid were each used as the sole carbon source. The PHA, synthesized in the glycerol/nonanoic acid medium, contains 3-hydroxy alkanoate units that have 5, 6, 7, 8, 9, or 10 carbons. The units that contain the even numbered carbons are derived from fatty acids that were produced from glycerol; whereas, the PHA units with the odd numbered carbons are derived from nonanoic acid. Pentanoate units were also found in the polyester derived from glycerol and nonanoic acid, and must have been synthesized indirectly via β-oxidation of nonanoic acid with the assistance of glycerol because pentanoate units were not found in PHA when P. putida was cultivated in the presence of only nonanoic acid.     

Current Mode Atomic Force Microscopy (C-AFM) Study for Local Electrical Characterization of Conjugated Polymer Blends

A blend of regioregular poly(3-hexylthiophene) (P3HT) and poly{[N,N′-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)} (P(NDI2OD-T2), which has the potential for polymer solar cells application, was prepared for current mode atomic force microscopy (C-AFM) measurements in this study. Phase-separated domains and the local electrical characteristics of P3HT/P(NDI2OD-T2) blends were investigated by the C-AFM.     

Variability and reliability of POP concentrations in multiple breast milk samples collected from the same mothers

Risk assessment of infant using a realistic persistent organic pollutant (POP) exposure through breast milk is essential to devise future regulation of POPs. However, recent investigations have demonstrated that POP levels in breast milk collected from the same mother showed a wide range of variation daily and monthly. To estimate the appropriate sample size of breast milk from the same mother to obtain reliable POP concentrations, breast milk samples were collected from five mothers living in Japan from 2006 to 2012. Milk samples from each mother were collected 3 to 6 times a day through 3 to 7 days consecutively. Food samples as the duplicated method were collected from two mothers during the period of breast milk sample collection. Those were employed for POP (PCBs, DDTs, chlordanes, and HCB) analysis. PCB concentrations detected in breast milk samples showed a wide range of variation which was maximum 63 and 60% of relative standard deviation (RSD) in lipid and wet weight basis, respectively. The time course trend of those variations among the mothers did not show any typical pattern. A larger amount of PCB intake through food seemed to affect 10 h after those concentrations in breast milk in lipid weight basis. Intraclass correlation coefficient (ICC) analyses indicated that the appropriate sample size for good reproducibility of POP concentrations in breast milk required at least two samples for lipid and wet weight basis.     

A numerical modeling approach to support decision-making on design of integrated multitrophic aquaculture for efficiently mitigating aquatic waste

As a bio-mitigation strategy of aquafarming pollutants, the integrated multitrophic aquaculture (IMTA) system has been proposed and developed to mitigate the waste produced during co-cultivation. Although there have been considerable implementations of IMTA worldwide, its optimal design needs a further study. Through a numerical modeling approach, this study aims to facilitate decision-making when designing IMTA to more efficiently mitigate the negative change caused by aquaculture. An improved three-dimensional numerical model is adopted to simulate the dynamics of water current and organic waste in Gokasho Bay, Japan. Results show that (1) the maximum main surface water current velocity in Hazama-ura area is less than 10 cm s^?1, where nutrient absorbers and/or suspended feeders can easily attach to a substratum; (2) southern-eastern direction water flow is dominant through the year suggesting that seaweeds (e.g., Laminaria japonica, Ulva ohnoi) or mussels (e.g., Mytilus edulis) are better arranged in the same direction; (3) horizontal distribution of organic waste on sea bottom indicates that when releasing sea cucumbers (e.g., Apostichopus japonicus), priority is given to the areas where the accumulated amount of particulate organic waste is high. Our case study provides a general idea on the optimal design of IMTA and can be scaled to the globe, especially regarding decision-making on locations for the extractive organisms. In conclusion, to improve the bio-mitigation efficiency of IMTA, location for nutrient absorbers and/or suspended feeders can be selected based on local water flow, and sea cucumbers need to be placed with a careful consideration of the waste distribution in local area.