Use of modern infrared thermography for wildlife population surveys

A commercially available thermal-infrared scanning system was used to survey populations of several wildlife species. The system's ability to detect species of different sizes in varying habitats relative to conventional survey methods, to differentiate between species in the same habitat, and the influence of environtmental factors on operational aspects of employing this technology in the field were evaluated. Total costs for the surveys were approximately $0.36/ha. There were marked discrepancies in the counts of untrained observers and those from trained analysis. Computer-assisted analysis of infrared imagery recorded 52% fewer deer than were estimated from drive counts, and densities of moose were five times those estimated from conventional aerial methods. By flying concentric circles and using telephoto, detailed counts of turkeys and deer were possible. With the aid of computer-assisted analysis, infrared thermography may become a useful wildlife population survey tool. More research is needed to verify the actual efficiency of detection by combining aerial scans with ground truthing for a variely of species and habitals.     

Does female aggression prevent polygyny? An experiment with pied flycatchers (Ficedula hypoleuca)

The female aggression hypothesis states that resident females may be able to prevent polygyny by behaving aggressively towards intruding females. A critical test of the hypothesis is to provide prospecting females with a choice between displaying mated males some of which have initial mates with artificially reduced levels of aggressiveness. Here we present a mate choice experiment on pied flycatchers Ficedula hypoleuca. The species is a cavity nester, and resident females were prevented from behaving aggressively by enclosing them within their own nestboxes: narrowing the entrance hole so that they could not escape but could still let their head out and have some contact with their mate. This treament had only a minor influence on male behaviour. We studied whether the experimental males were better able to attract a new female than a control group of mated males. Four predictions from the female aggression hypothesis were supported. (1) Mating success of control males was positively related to the distance between their primary and secondary territory. (2) For experimental males, mating success was unrelated to interterritorial distance. (3) Experimental males had higher mating success than control males when the interterritorial distance was short but (4) not when it was long. Experimental males had much lower mating success than unmated males, as would be expected if prospecting females are able to discover male mating status from cues other than visits by primary females to their mates' secondary nest sites. Received: 5 January 1998 / Accepted after revision: 30 December 1998     

ASSESSMENT OF PREDICTORS FOR STREAM EUTROPHICATION POTENTIAL1

ABSTRACT: Predicting stream eutrophication potential from non-point source nutrient loading across large temporal and spatial scales is a significant problem. In this paper we describe how two physiological indicators of P stress of stream bioflims, alkaline phosphatase activity (APA) and stored (surplus) P relate to two predictors of P loading: annual P loading predicted by the watershed model SIMPLE, and stream concentrations of soluble reactive P (SRP) in eight subbasins in the illinois River basin in Oklahoma. Data for APA, surplus P, nutrients and water chemistry were obtained at watershed outlets once during the cold season and twice during the warm season. There was a negative curvilinear relationship between APA and both predictors. Best fit was achieved by APA vs. annual predicted P loading. Both SRP and P. load are potentially useful to identify subbasins requiring no pollution abatement and to establish a regional target for P-load reduction. Surplus P is not as useful as APA in establishing these thresholds.     

Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.     

Contributions of Acid Deposition and Natural Processes to Cation Leaching from Forest Soils: A Review

Methods of quantifying the roles of atmospheric acid inputs and internal acid generation by carbonic, organic, and nitric acids are illustrated by reviewing data sets from several intensively studied sites in North America. Some of the sites (tropical, temperate deciduous, and temperate coniferous) received acid precipitation whereas others (northern and subalpine) did not. Natural leaching by carbonic acid dominated soil leaching in the tropical and temperate coniferous sites, nitric acid (caused by nitrification) dominated leaching In an N-fixing temperate deciduous site, and organic acids dominated surface soil leaching in the subalpine site and contributed to leaching of surface soils in several other sites. Only at the temperate deciduous sites did atmospheric acid input play a major role in soil leaching. In no case, however, are the annual net losses of cations regarded as alarming as compared to soil exchangeable cation capital.

These results were used to illustrate the methods of quantifying the effects of atmospheric inputs and internal processes on soil leaching rates, not to draw broad generalizations as to acid rain effects on soils. However, there are predictable patterns in natural soil leaching processes which relate to climate, soil properties, and vegetation that may help in predicting the relative importances of natural vs. atmospheric acid inputs to soil leaching.     

Understanding the role of land use in urban stormwater quality management

Urbanisation significantly impacts water environments with increased runoff and the degradation of water quality. The management of quantity impacts are straight forward, but quality impacts are far more complex. Current approaches to safeguard water quality are largely ineffective and guided by entrenched misconceptions with a primary focus on 'end-of-pipe' solutions. The outcomes of a research study presented in the paper, which investigated relationships between water quality and six different land uses offer practical guidance in the planning of future urban developments. In terms of safeguarding water quality, high-density residential development which results in a relatively smaller footprint would be the preferred option. The research study outcomes bring into question a number of fundamental concepts and misconceptions routinely accepted in stormwater quality management. The research findings confirmed the need to move beyond customary structural measures and identified the key role that urban planning can play in safeguarding urban water environments.     

Source profiles for industrial, mobile, and area sources in the Big Bend Regional Aerosol Visibility and Observational study

Representative PM2.5 and PM10 source emissions were sampled in Texas during the Big Bend Regional Aerosol Visibility and Observa (BRAVO) study. Chemical source profiles for elements, ions, and carbon fractions of 145 samples are reported for paved and unpaved road dust, soil dust, motor vehicle exhaust, vegetative burning, four coal-fired power stations, an oil refinery catalytic cracker, two cement kilns, and residential meat cooking. Several samples were taken from each emitter and source type, and these were averaged by source type, and in source subgroups based on commonality of chemical composition. The standard deviation represents the variability of the chemical mass fractions. BRAVO profiles differed in some respects from profiles measured elsewhere. High calcium abundances in geological dust, high selenium abundances in coal-fired power stations, and high antimony abundances in oil refinery catalytic cracker emissions were found. Abundances of eight thermally evolved carbon fractions [Atmos. Environ. 28 (15) (1994) 2493] differ among combustion sources, and a Monte Carlo simulation demonstrates that these differences are sufficient to differentiate among several carbon-emitters.     

Does Soil Carbon Loss in Biomass Production Systems Negate the Greenhouse Benefits of Bioenergy?

Interest in bioenergy is growing across the Western world in response to mounting concerns about climate change. There is a risk of depletion of soil carbon stocks in biomass production systems, because a higher proportion of the organic matter and nutrients are removed from the site, compared with conventional agricultural and forestry systems. This paper reviews the factors that influence soil carbon dynamics in bioenergy systems, and utilises the model FullCAM to investigate the likely magnitude of soil carbon change where bioenergy systems replace conventional land uses. Environmental and management factors govern the magnitude and direction of change. Soil C losses are most likely where soil C is initially high, such as where improved pasture is converted to biomass production. Bioenergy systems are likely to enhance soil C where these replace conventional cropping, as intensively cropped soils are generally depleted in soil C. Measures that enhance soil C include maintenance of productivity through application of fertilisers, inclusion of legumes, and retention of nutrient-rich foliage on-site. Modelling results demonstrate that loss of soil carbon in bioenergy systems is associated with declines in the resistant plant matter and humified soil C pools. However, published experimental data and modelling results indicate that total soil C loss in bioenergy systems is generally small. Thus, although there may be some decline in soil carbon associated with biomass production, this is negligible in comparison with the contribution of bioenergy systems towards greenhouse mitigation through avoided fossil fuel emissions.