Mercury removal from aqueous solution using petal-like MoS2 nanosheets

• Synthesized few-layered MoS₂ nanosheets via surfactant-assisted hydrothermal method. • Synthesized MoS₂ nanosheets show petal-like morphology. • Adsorbent showed 93% of mercury removal efficiency. • The adsorption of mercury is attributed to negative zeta potential (-21.8 mV). Recently, different nanomaterial-based adsorbents have received greater attention for the removal of environmental pollutants, specifically heavy metals from aqueous media. In this work, we synthesized few-layered MoS₂ nanosheets via a surfactant-assisted hydrothermal method and utilized them as an efficient adsorbent for the removal of mercury from aqueous media. The synthesized MoS₂ nanosheets showed petal-like morphology as confirmed by scanning electron microscope and high-resolution transmission electron microscopic analysis. The average thickness of the nanosheets is found to be about 57 nm. Possessing high stability and negative zeta potential makes this material suitable for efficient adsorption of mercury from aqueous media. The adsorption efficiency of the adsorbent was investigated as a function of pH, contact time and adsorbent dose. The kinetics of adsorption and reusability potential of the adsorbent were also performed. A pseudo-second-order kinetics for mercury adsorption was observed. As prepared MoS₂ nanosheets showed 93% mercury removal efficiency, whereas regenerated adsorbent showed 91% and 79% removal efficiency in the respective 2^nd and 3^rd cycles. The adsorption capacity of the adsorbent was found to be 289 mg/g at room temperature.     

Can machines recognise stress in plants?

In this paper we show that chlorophyll a fluorescence signals analysed with the self-organizing map (SOM) can be used as a routine tool for the monitoring and classification of pea varieties (Pisum sativum) according to their degree of resistance against drought stress. Fluorescence kinetics measurements were obtained from non-stressed plants. The aim of this study is to evaluate the applicability of artificial intelligence techniques in eco-physiological research. Our goal is to provide a fast tool that will contribute to the knowledge needed to develop strategies that would help to decrease the impact of environmental stress in agriculture and forestry.     

Effect of hydrogen sulfide in comparison to atorvastatin on endothelial damage in cholesterol-fed rabbits

Hydrogen sulfide (H₂S) is an endogenous gaseous molecule, functioning as a physiological regulator. This study aimed to investigate the role of H₂S in atherosclerosis. Rabbits receiving high cholesterol were given atorvastatin (10 mg/kg/day, orally) or sodium sulfide (1.1 mg/kg/day, intramuscular) 2 weeks after commencement of high-cholesterol diet and continued for 4 weeks. Serum lipid profiles, lipid peroxidation indexed as malondialdehyde, glutathione, superoxide dismutase, the vascular adhesion molecule-1, and aortic vascular endothelial growth factor were determined. Rabbits receiving a high-cholesterol diet showed elevated levels of total serum cholesterol, triglycerides, low-density lipoprotein cholesterol, malondialdehyde and vascular adhesion molecule-1, and aortic vascular endothelial growth factor expression and lower levels of high-density lipoprotein cholesterol, glutathione, and superoxide dismutase. Treatment with atorvastatin and sodium sulfide has beneficial effects on serum lipid profile, oxidative damage, vascular adhesion molecule-1, and aortic expression of vascular endothelial growth factor.     

Morphological,physiological, and genotoxic effects of heavy metal bioaccumulation in Prosopis laevigata reveal its potential for phytoremediation

Environmental Science and Pollution Research - Mining industry generates large volumes of waste known as mine tailings, which contain heavy metals (HMs) that generate a risk to environmental...     

Changes in precipitation chemistry in Lithuania for 1981-2004

This paper considers the spatial and temporal variability in concentrations of the potentially acidifying ions in precipitation in Lithuania during the 1981-2004 period. Chemical analysis of precipitation included measurements of pH, conductivity, sulfate (SO4(2-)), nitrate (NO3-), chloride (Cl-), ammonium (NH4+), sodium (Na+), potassium (K+), and calcium (Ca2+). Temporal trends in the potentially acidifying ion concentrations in precipitation and wet deposition were evaluated using the non-parametric Mann-Kendall test and Sen's slope estimator. A statistically significant decline was observed in non-sea salt sulfate (nssSO4(2-)) and hydrogen (H+) ions concentrations (82% and 79%, respectively) and wet depositions (88% and 74%, respectively). Temporal trends both in concentration and wet deposition of nitrate and ammonium were not as pronounced as trends in sulfate concentration. Analysis of air mass backward trajectories was applied to reveal the influence of air mass originating in different regions on wet deposition of acidifying species in Lithuania. Sector analysis clearly showed that wet deposition of sulfur and nitrogen in Lithuania is to a large extent anthropogenic and the main source regions of acidifying species contributing to wet deposition in Lithuania are in South and Central Europe.     

Shell disturbances and butyltins burden in commercial bivalves collected from the Bizerta lagoon (northern Tunisia)

Shell disturbances and soft tissues butyltin burden were investigated in commercial bivalves Lithophaga lithophaga, Mytilus galloprovincialis, Solen marginatus and Crassostrea gigas from the Bizerta lagoon. Shell disturbances were found in all bivalves, being scarce in S. marginatus. In the internal valve of L. lithophaga, burrowing annelids and sipunculids living inside galleries were observed, while in the external valve, brown-blackish or white stains were found. In M. galloprovincialis, a yellowish mass located at the shell anterior side was found fixed firmly to the pearly layer by a hard brownish structure covering some annelid elliptic eggs. In the internal shell layer of some specimens collected in April, embryos belonging to tubiculous annelids at various developmental stages were observed. In C. gigas, shell thickening was revealed in some specimens corresponding to white doughy deposits at the internal valve and between shell layers. In S. marginatus, only one specimen showing a cavity at the posterior site was found. Total butyltin concentrations in the studied bivalves varied between 30 and 245?ng/g dry weight with tributyltin (TBT) being the predominant compound. The highest concentration was recorded in L. lithophaga collected from the Bizerta Bay and the lowest concentration in S. marginatus from Maghraoua. This study provided baseline data that could serve for long-term monitoring of TBT pollution in Tunisia, since legislation to reduce the use of TBT-based antifouling paints has not been introduced yet.     

Single drop microextraction and gas chromatography–mass spectrometry for the determination of diflufenican, mepanipyrim, fipronil, and pretilachlor in water samples

An analytical method for the determination of diflufenican, mepanipyrim, pretilachlor, and fipronil in water samples was developed using single drop microextraction in the direct immersion mode and gas chromatography–mass spectrometry. A factorial fractionated design of type 2^6–1 at two levels was performed, to study the influence of experimental variables such as ionic strength, pH, agitation speed, extraction time, drop volume, and sample volume. To establish the optimal conditions for the variables that were significant, a Doehlert design was performed. The optimum conditions of extraction were 1 μL of heptane immersed in 4.0 mL of sample with continuous agitation at 500 rpm for 30 min at room temperature. The developed method proved to have good linearity for the range studied. The detection limits were 0.07 μg L^?1 for diflufenican, 0.03 μg L^?1 for mepanipyrim, 0.08 μg L^?1 for pretilachlor, and 1.39 μg L^?1 for fipronil. The method was validated on river water samples, showing the absence of matrix effect and recoveries ranged from 90.1 to 107.8 %. The results show that the method developed is accurate, sensitive, rapid, simple, and low cost, so it is recommended for application in the analysis of these different classes of pesticides in water samples.     

Polymer coating of copper oxide nanoparticles increases nanoparticles uptake and toxicity in the green alga Chlamydomonas reinhardtii

Copper oxide nanoparticles (CuO NPs) are frequently used in a polymer-coated form, to be included in paints or fabrics for antimicrobial properties. Their application in antifouling paints may lead to the contamination of aquatic ecosystems. However, the toxicological risk of NPs in the environment is hard to evaluate due to a lack of knowledge on the mechanisms of NP interaction with biological systems. In this study, we investigated the effect of polymer coating on CuO NP toxicity in the green alga Chlamydomonas reinhardtii by comparing bare and polymer-coated CuO NPs prepared from the same CuO nanopowder. Both CuO NP suspensions were toxic to C. reinhardtii after 6 h treatment to concentrations of 0.005-0.04 g L⁻¹. Bare and polymer-coated CuO NPs induced a decrease of Photosystem II activity and the formation of reactive oxygen species. Polymer-coated CuO NP was found to be more toxic than the uncoated CuO NP. The higher toxicity of CS-CuO NP was mainly associated with the increased capacity of polymer-coated CuO NP to penetrate the cell compared to bare CuO NPs. These results indicates that the high toxicity of polymer-coated CuO NPs in algal cells results of intracellular interactions between NPs and the cellular system.     

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia

Rainwater tanks for larger roof areas need optimisation of tank size, which is often not carried out before installation of these tanks. This paper presents a case study of rainwater tank evaluation and design for large roof areas, located in Melbourne, Australia, based on observed daily rainfall data representing three different climatic regimes (i.e. dry average, and wet years). With the aim of developing a comprehensive Decision Support Tool for the performance analysis and design of rainwater tanks, a simple spreadsheet based daily water balance model is developed using daily rainfall data, contributing roof area, rainfall loss factor, available storage volume, tank overflow and irrigation water demand. In this case study, two (185 m³ and 110 m³) underground rainwater tanks are considered. Using the developed model, effectiveness of each tank under different climatic scenarios are assessed. The analysis shows that both the tanks are quite effective in wet and average years, however less effective in dry years. A payback period analysis of the tanks is preformed which reveals that the total construction cost of the tanks can be recovered within 15-21 years time depending on tank size, climatic conditions and future water price increase rates. For the tanks, a relationship between water price increase rates and payback periods is developed. The study highlights the need for detailed optimisation and financial analysis for large rainwater tanks to maximise the benefits.     

Constant light exposure and/or pinealectomy increases susceptibility to trichloroethylene-induced hepatotoxicity and liver cancer in male mice

Environmental Science and Pollution Research - Exposure to light at night, pineal gland impairment, and the environmental pollutant trichloroethylene (TCE) have serious implications for health and...