Assessment of the trophic status of four coastal lagoons and one estuarine delta, eastern Brazil

Anthropogenic eutrophication of aquatic ecosystems continues to be one of the major environmental issues worldwide and also of Brazil. Over the last five decades, several approaches have been proposed to discern the trophic state and the natural and cultural processes involved in eutrophication, including the multi-parameter Assessment of Estuarine Trophic Status (ASSETS) index model. This study applies ASSETS to four Brazilian lagoons (Mundaú, Manguaba, Guarapina, and Piratininga) and one estuarine delta (Paraíba do Sul River), set along the eastern Brazilian coast. The model combines three indices based on the pressure–state–response (PSR) approach to rank the trophic status and forecast the potential eutrophication of a system, to which a final ASSETS grade is established. The lagoons were classified as being eutrophic and highly susceptible to eutrophication, due primarily to their longer residence times but also their high nutrient input index. ASSETS classified the estuary of the Paraíba do Sul river with a low to moderate trophic state (e.g., largely mesotrophic) and low susceptibility to eutrophication. Its nutrient input index was high, but the natural high dilution and flushing potential driven by river flow mitigated the susceptibility to eutrophication. Eutrophication forecasting provided more favorable trends for the Mundaú and Manguaba lagoons and the Paraíba do Sul estuary, in view of the larger investments in wastewater treatment and remediation plans. The final ASSETS ranking system established the lagoons of Mundaú as “moderate,” Manguaba as “bad,” Guarapina as “poor,” and Piratininga as “bad,” whereas the Paraíba do Sul River Estuary was “good.”     

A tiered procedure for assessing the formation of biotransformation products of pharmaceuticals and biocides during activated sludge treatment

Upon partial degradation of polar organic micropollutants during activated sludge treatment, transformation products (TPs) may be formed that enter the aquatic environment in the treated effluent. However, TPs are rarely considered in prospective environmental risk assessments of wastewater-relevant compound classes such as pharmaceuticals and biocides. Here, we suggest and evaluate a tiered procedure, which includes a fast initial screening step based on high resolution tandem mass spectrometry (HR-MS/MS) and a subsequent confirmatory quantitative analysis, that should facilitate consideration of TPs formed during activated sludge treatment in the exposure assessment of micropollutants. At the first tier, potential biotransformation product structures of seven pharmaceuticals (atenolol, bezafibrate, ketoprofen, metoprolol, ranitidine, valsartan, and venlafaxine) and one biocide (carbendazim) were assembled using computer-based biotransformation pathway prediction and known human metabolites. These target structures were screened for in sludge-seeded batch reactors using HR-MS/MS. The 12 TPs found to form in the batch experiments were then searched for in the effluents of two full-scale, municipal wastewater treatment plants (WWTPs) to confirm the environmental representativeness of this first tier. At the second tier, experiments with the same sludge-seeded batch reactors were carried out to acquire kinetic data for major TPs that were then used as input parameters into a cascaded steady-state completely-stirred tank reactor (CSTR) model for predicting TP effluent concentrations. Predicted effluent concentrations of four parent compounds and their three major TPs were corroborated by comparison to 3-day average influent and secondary effluent mass flows from one municipal WWTP. CSTR model-predicted secondary effluent mass flows agreed within a factor of two with measured mass flows and confidence intervals of predicted and measured mass flows overlapped in all cases. The observed agreement suggests that the combination of batch-determined transformation kinetics with a simple WWTP model may be suitable for estimating aquatic exposure to TPs formed during activated sludge treatment. Overall, we recommend the tiered procedure as a realistic and cost-effective approach to include consideration of TPs of wastewater-relevant compounds into exposure assessment in the context of prospective chemical risk assessment.     

Climate change communication insights from cooperative Extension professionals in the US Southern states: finding common ground

Climate change is often avoided in educational programming due to its perceived polarizing nature. Identifying areas of agreement may help educators introduce climate change topics and help audiences begin to listen. As part of a survey of Extension professionals in the southeastern US, respondents shared their thoughts about climate change. Based on methods used by Maibach, Leiserowitz, Roser-Renouf, and Mertz [(2011). Identifying like-minded audiences for global warming public engagement campaigns: An audience segmentation analysis and tool development. PLoS ONE, 6(3), e17571], we categorized respondents using the Six Americas segments. Qualitative data analysis techniques were applied to identify common themes. Five themes emerged as common across most segments: (1) confusion and mistrust abound, (2) educators face barriers to climate change education, (3) economic aspects of climate change are important, (4) we should be good stewards of Earth, and (5) adaptation is an agreeable strategy. By identifying climate change message frames with which people may agree, regardless of how they feel about climate change, educators may be able to better communicate with broader audiences.     

Benzene, toluene and xylenes levels in new and used vehicles of the same model

The aim of this work was to determine the level of benzene, toluene, o-xylene and m, p-xylene （BTX） in air samples collected from the cabins of new and used vehicles of the same model. Ten new vehicles were examined in order to check interior emission from materials used to equip the passenger compartment. In order to compare and define the impact of exhaust gases, air samples were also collected from two used cars, at different mileages （up to 20,000 kin）. All vehicles tested were of the same type. Samples were collected onto Carbograph 1TD sorbent, thermally desorbed and examined with the use of gas chromatography with flame ionisation and mass spectrometry detectors. All results obtained were referred to Polish and German requirements for indoor air quality （both in public buildings and in workspace environments）. Average benzene, toluene, o-xylene and m, p-xylene concentrations in new cars were determined at the level of 11.8 μg/m^3, 82.7 μg/m^3, 21.2 μg/m^3 and 89.5 μg/m^3, respectively. In the used cars, BTX concentration increased with increasing vehicle mileage. The most significant increase of BTX concentration was observed above 11,000 km mileage.     

Reptile and arboreal marsupial response to replanted vegetation in agricultural landscapes.

We report reptile and arboreal marsupial responses to vegetation planting and remnant native vegetation in agricultural landscapes in southeastern Australia. We used a hierarchical survey to select 23 landscapes that varied in the amounts of remnant native vegetation and planted native vegetation. We selected two farms within each landscape. In landscapes with plantings, we selected one farm with and one farm without plantings. We surveyed arboreal marsupials and reptiles on four sites on each farm that encompassed four vegetation types (plantings 7-20 years old, old-growth woodland, naturally occurring seedling regrowth woodland, and coppice [i.e., multistemmed] regrowth woodland). Reptiles and arboreal marsupials were less likely to occur on farms and in landscapes with comparatively large areas of plantings. Such farms and landscapes had less native vegetation, fewer paddock trees, and less woody debris within those areas of natural vegetation. The relatively large area of planting on these farms was insufficient to overcome the lack of these key structural attributes. Old-growth woodland, coppice regrowth, seedling regrowth, and planted areas had different habitat values for different reptiles and arboreal marsupials. We conclude that, although plantings may improve habitat conditions for some taxa, they may not effectively offset the negative effects of native vegetation clearing for all species, especially those reliant on old-growth woodland. Restoring suitable habitat for such species may take decades to centuries.     

Regression method of the hydrophobicity ruler approach for determining octanol/water partition coefficients of very hydrophobic compounds

A regression method was developed for the hydrophobicity ruler approach, which is an indirect method for determining the octanol/water partition coefficients of very hydrophobic compounds. Two constants introduced into the mathematical model were obtained by regression of the absorption data sampled before the partition equilibrium. A water miscible organic solvent was used to increase the solubility of the very hydrophobic compounds in the aqueous solution so that the hydrophobicity scale was reduced and the equilibration was accelerated. Polydimethylsiloxane/methanol aqueous solution and a series of 21 polychlorinated biphenyls (PCBs) were used to demonstrate the regression method. The PCB compounds with known experimental logK(o/w) values served as reference compounds, while the PCB compounds without known logK(o/w) values were determined. The distribution coefficients (logK(p/s)), uptake and elimination rate constants were obtained from the two regression constants for each compound (reference or unknown). The correlation of the logK(p/s) values of the reference PCB compounds with their logK(o/w) values was linear (logK(o/w)=2.69logK(p/s)+0.76, R(2)=0.97). The logK(o/w) values were compared with literature values and suggested that some values from the literature far off the calibration line could be inaccurate. The critical experimental factors, the merits of the regression method were discussed.     

Post-rehabilitation environmental hazard of Cu, Zn, As and Pb at the derelict Conrad Mine, eastern Australia

A post-rehabilitation audit of the derelict Conrad base metal mine, eastern Australia, indicates ongoing environmental hazard regarding acid mine drainage and concentrations of arsenic and lead to 3 wt% in the soil and sediment. In order to rehabilitate remote contaminated sites effectively, on-site analyses should be carried out to ensure that the materials used to rehabilitate the site are not contaminant-bearing. Understanding the geomorphic setting of the rehabilitated areas is also important in understanding where, and for what period, contaminated materials might be stored in fluvial systems downstream of mine workings. Chemical and geomorphic audits should form a fundamental part of all rehabilitation works to ensure favourable environmental outcomes.     

The Effect of Chain Extender on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate): Thermal Degradation,Crystallization, and Rheological Behaviours

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a semi-polycrystalline biopolymer from the polyhydroxyalkanonate family has in recent years become a commercial bioplastic with mechanical properties comparable to isotactic polypropylene and enhanced O₂, CO₂ and H₂O barrier properties. However, its brittleness and sensitivity to thermal and hydrolysis degradations restrict its applications. To overcome the problems associated with degradation during processing blending of PHBV and an epoxy-functionalized chain extender (Joncryl^® ADR-4368 S) was conducted in a twin screw extruder. The effect of concentration of the chain extender on thermal, crystallization and rheological behaviours of PHBV was investigated. Thermal gravimetric analysis results indicated improvement in the resistance to thermal decomposition of PHBV by introducing the chain extender. This was accompanied with calculation of thermal degradation activation energy (E_a) using the Flyn–Walls–Ozawa method which confirmed increase of E_a with the increase in content of the chain extender. The rheological behaviour and crystallization of modified PHBV was characterized by rotational rheometry and differential scanning calorimetry techniques, respectively. The results show that addition of chain extender enhanced viscosity of PHBV and also reduce the rate of crystallization.     

LC-MS/MS method validation for determination of selected neonicotinoids in groundwater for the purpose of a column experiment

The work was carried out to develop and validate a method based on liquid chromatography tandem mass spectrometry (LC-MS/MS) for the simultaneous detection and quantification of five neonicotinoid insecticides: acetamiprid, clothianidin, imidacloprid, thiacloprid and thiamethoxam in groundwater samples for the purpose of a further column experiment. This experiment will be used to analyze breakthrough curves of neonicotinoids under a saturated water flow to set transport parameters, where the reliability of the results of chemical analysis plays an important role. The validation was performed in a concentration range from 0.09?µg L^?1 to 100?µg L^?1 using an Infinity 1290 (Agilent, USA) chromatograph coupled with a QTrap 5500 mass spectrometer (Sciex, Canada). The calibration curves were obtained on the basis of the results of six standard solution analyses. Linearity was not lower than 0.998. The limit of detection was set at the lowest concentration which can be determined with an acceptable accuracy and precision. All pesticides had recoveries in the range 85–109% with relative standard deviation values less than 8.1%. The estimated measurement uncertainty did not exceed 30%, so the LC-MS/MS method fits for the intended purpose.     

The use of virtual environments for percentage view analysis

It is recognised that Visual Impact Assessment (VIA), unlike many other aspects of Environmental Impact Assessments (EIA), relies less upon measurement than upon experience and judgement. Hence, it is necessary for a more structured and consistent approach towards VIA, reducing the amount of bias and subjectivity. For proposed developments, there are very few quantitative techniques for the evaluation of visibility, and these existing methods can be highly inaccurate and time consuming. Percentage view changes are one of the few quantitative techniques, and the use of computer technology can reduce the inaccuracy and the time spent evaluating the visibility of either existing or proposed developments. For over 10 years, research work undertaken by the authors at the University of Nottingham has employed Computer Graphics (CG) and Virtual Reality (VR) in civilian and industrial contexts for environmental planning, design visualisation, accident reconstruction, risk analysis, data visualisation and training simulators. This paper describes a method to quantitatively assess the visual impact of proposed developments on the landscape using CG techniques. This method allows the determination of accurate percentage view changes with the use of a computer-generated model of the environment and the application of specialist software that has been developed at the University of Nottingham. The principles are easy to understand and therefore planners, authorisation agencies and members of the public can use and understand the results. A case study is shown to demonstrate the application and the capabilities of the technology.