Agroecosystems,nitrogen-use efficiency,and nitrogen management

The global challenge of meeting increased food demand and protecting environmental quality will be won or lost in cropping systems that produce maize, rice, and wheat. Achieving synchrony between N supply and crop demand without excess or deficiency is the key to optimizing trade-offs amongst yield, profit, and environmental protection in both large-scale systems in developed countries and small-scale systems in developing countries. Setting the research agenda and developing effective policies to meet this challenge requires quantitative understanding of current levels of N-use efficiency and losses in these systems, the biophysical controls on these factors, and the economic returns from adoption of improved management practices. Although advances in basic biology, ecology, and biogeochemistry can provide answers, the magnitude of the scientific challenge should not be underestimated because it becomes increasingly difficult to control the fate of N in cropping systems that must sustain yield increases on the world's limited supply of productive farm land.     

Relationship of soil test phosphorus and sampling depth to runoff phosphorus in calcareous and noncalcareous soils

A study was initiated to investigate the relationship between soil test P and depth of soil sampling with runoff losses of dissolved molybdate reactive phosphorus (DMRP). Rainfall simulations were conducted on two noncalcareous soils, a Windthorst sandy loam (fine, mixed, thermic Udic Paleustalf) and a Blanket clay loam (fine, mixed, thermic Pachic Argiustoll), and two calcareous soils, a Purves clay (clayey, smectitic, thermic Lithic Calciustoll) and a Houston Black clay (fine, smectitic, thermic Udic Haplustert). Soil (0- to 2.5-, 0- to 5-, and 0- to 15-cm depths) and runoff samples were collected from each of the four soils in permanent pasture exhibiting a wide range in soil test P levels (as determined by Mehlich III and distilled water extraction) due to prior manure applications. Simulated rain was used to produce runoff, which was collected for 30 min. Good regression equations were derived relating soil test P level to runoff DMRP for all four soil types, as indicated by relatively high r2 values (0.715 to 0.961, 0- to 5-cm depth). Differences were observed for the depth of sampling, with the most consistent results observed with the 0- to 5-cm sampling depth. Runoff DMRP losses as a function of the concentration of P in soil were lower in calcareous soils (maximum of 0.74 mg L(-1)) compared with noncalcareous soils (maximum of 1.73 mg L(-1)). The results indicate that a soil test for environmental P could be developed, but it would require establishing different soil test P level criteria for different soils or classes of soils.     

The consequences of land use change on nutrient exports: a regional scale assessment in south-west Victoria, Australia

Estimation of nutrient load production based on multi-temporal remotely sensed land use data for the Glenelg-Hopkins region in south-west Victoria, Australia, is discussed. Changes in land use were mapped using archived Landsat data and computerised classification techniques. Land use change has been rapid in recent history with 16% of the region transformed in the last 22 years. Total nitrogen and phosphorus loads were estimated using an export coefficient model. The analysis demonstrates an increase in modelled nitrogen and phosphorus loadings from 1980 to 2002. Whilst such increases were suspected from past anecdotal and ad-hoc evidence, our modelling estimated the magnitude of such increases and thus demonstrated the enormous potential of using remote sensing and GIS for monitoring regional scale environmental processes.     

Nitrate movement in shallow ground water from swine-lagoon-effluent spray fields managed under current application regulations

Rapid increases in the swine (Sus scrofa domestica) population in the 1990s and associated potential for nitrate N pollution of surface waters led the state of North Carolina to adopt stringent waste management regulations in 1993. Our objectives were to characterize (i) nitrate N movement from waste application fields (WAFs) in shallow ground water, and (ii) soil, hydrologic, and biological factors influencing the amount of nitrate N in the adjacent stream. A ground water monitoring study was conducted for 36 mo on a swine farm managed under new regulations. Water table contours and lack of vertical gradients indicated horizontal flow over most of the site. Nitrate N concentrations in water from shallow wells in WAFs averaged 30 +/- 19 mg L(-1) and delta15N ratios for nitrate N were between +20 and +25 per mil. Nitrate N concentration decreased from field-edge to streamside wells by 22 to 99%. Measurement of delta18O and delta15N enrichment of nitrate in ground water throughout the WAF-riparian system indicated that denitrification has not caused significant 15N enrichment of nitrate. Over a 24-mo period, delta15N ratios for nitrate N in the stream approached delta15N ratios for nitrate N in ground water beneath WAFs indicating delivery of some waste-derived nitrate N to the stream in shallow ground water. Nitrate N concentrations in the stream were relatively low, averaging 1 mg L(-1). Dilution of high nitrate N water in shallow horizontal flow paths with low nitrate N water from deeper horizontal flow paths at or near the stream, some denitrification as ground water discharges through the stream bottom, and some denitrification in riparian zone contributed to this low nitrate N concentration.     

Bioabsorbable soy protein plastic composites: Effect of polyphosphate fillers on water absorption and mechanical properties

The use of synthetic and natural bioabsorbable plastics has been severely limited due to their low stiffness and strength properties as well as their strong tendency to absorb moisture. This research focused on the development of bioabsorbable polyphosphate filler/soy protein plastic composites with enhanced stiffness, strength, and water resistance. Bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter were homogenized and compression-molded. Physical, mechanical, and water absorption testing was performed on the molded specimens. Results showed improvements in stiffness, strength, and water resistance with increasing polyphosphate filler content up to 20% by weight. Application of a coupling agent produced further mechanical property enhancements and a dramatic improvement in water resistance, interpreted by an interfacial chemical bonding model. Examination of the fracture surfaces of the materials revealed that the addition of the polyphosphate fillers changed the failure mode from brittle to pseudo-ductile. These results suggest that these materials are suitable for many load-bearing applications in both humid and dry environments where current soy protein plastics are not usable.     

Environmental justice: A louisiana case study

The paper begins with a brief analysis of the concepts of environmental justice and environmental racism and classism. The authors argue that pollution- and environment-related decision-making is prima facie wrong whenever it results in inequitable treatment of individuals on the basis of race or socio-economic status. The essay next surveys the history of the doctrine of free informed consent and argues that the consent of those affected is necessary for ensuring the fairness of decision-making for siting hazardous facilities. The paper also points out that equal opportunity to environmental protection and free informed consent are important rights. Finally, it presents a case study on the proposed uranium enrichment facility near Homer, Louisiana and argues that siting the plant would violate norms of distributive equity and free informed consent. It concludes that siting the facility is a case of environmental injustice and likely an example of environmental racism or classism.     

STATISTICAL LOW FLOW ESTIMATION USING GIS ANALYSIS IN HUMID MONTANE REGIONS IN PUERTO RICO1

ABSTRACT: Statistical analysis of watershed parameters derived using a Geographical Information system (GIS) was done to develop equations for estimating the 7d–10yr, 30d–10yr, and 7d–2yr low flow for watersheds in humid montane regions of Puerto Rico. Digital elevation models and land use, geology, soils, and stream network coverages were used to evaluate 21 geomorphic, 10 stream channel, 9 relief, 7 geology, 4 climate, and 2 soil parameters for each watershed. To assess which parameters should be used for further investigation, a correlation analysis was used to determine the independence and collinearity among these parameters and their relationship with low flows. Multiple regression analyses using the selected parameters were then performed to develop the statistical models of low flows. The final models were selected in the basis of the Mallow Cp statistic, the adjusted R², the Press statistic, the degree of collinearity, and an analysis of the residuals. In the final models, drainage density, the ratio of length of tributaries to the length of the main channel, the percent of drainage area with northeast aspect, and the average weighted slope of the drainage were the most significant parameters. The final models had adjusted standard errors of 58.7 percent, 59.2 percent, and 48.6 percent for the 7d–10yr, 30d–10yr, and 7d–2yr low flows respectively. For comparison, the best model based on watershed parameters that can be easily measured without a GIS had an adjusted standard error of 82.8 percent.     

Treating contaminated groundwater using a fluidized-bed reactor

Both biological treatment and carbon adsorption have inherent advantages for remediation of groundwater contaminated with compounds such as benzene, toluene, ethylbenzene, and xylenes (BTEX). Biological treatment destroys the contaminants and is extremely cost-effective. Carbon adsorption is a positive removal mechanism that ensures a product water of high quality, but the process is relatively expensive and requires frequent carbon replacement and/or regeneration. Coupling the two processes realizes the inherent advantages of both approaches. An additional benefit of combining these removal mechanisms in a biological fluidizedbed reactor (FBR) system is that no loss of BTEX from volatilization occurs, since predissolution of oxygen is used in place of conventional aeration for the fluidized-bed process. This article summarizes preliminary performance data from a laboratory, pilot-scale biological FBR, using granulated activated carbon (GAC) as the support media (GAC-FBR), operated at various BTEX concentrations and organic loading rates. Greater than 99-percent degradation of total BTEX was achieved at an organic loading rate of 3.0 kg COD/m³-day or less and an empty bed hydraulic retention time of 5.0 minutes. System performance was extremely robust, easily handling a tenfold step increase in loading due to the combined adsorptive capability of the biofilm-coated GAC and ability to subsequently bioregenerate the GAC. Monitoring verified that no off-gas was produced during treatment.