Low Genetic Variability in the Hawaiian Monk Seal

The Hawaiian monk seal (   Monachus schauinslandi) is a critically endangered species that has failed to recover from human exploitation despite decades of protection and ongoing management efforts designed to increase population growth. The seals breed at five principal locations in the northwestern Hawaiian islands, and inter-island migration is limited. Genetic variation in this species is expected to be low due to a recent population bottleneck and probable inbreeding within small subpopulations. To test the hypothesis that small population size and strong site fidelity has led to low within-island genetic variability and significant between-island differentiation, we used two independent approaches to quantify genetic variation both within and among the principal subpopulations. Mitochondrial control region and tRNA gene sequences (359 base pairs) were obtained from 50 seals and revealed very low genetic diversity (0.6% variable sites), with no evidence of subpopulation differentiation. Multilocus DNA fingerprints from 22 individuals also indicated low genetic variation in at least some subpopulations (band-sharing values for "unrelated" seals from the same island ranged from 49 to 73%). This method also provided preliminary evidence of population subdivision (  F'_st estimates of 0.20 and 0.13 for two adjacent island pairs). Translocations of seals among islands may therefore have the potential to relieve local inbreeding and possibly to reduce the total amount of variation preserved in the population. Genetic variation is only one of many factors that determine the ability of an endangered species to recover. Maintenance of existing genetic diversity, however, remains an important priority for conservation programs because of the possibility of increased disease resistance in more variable populations and the chance that inbreeding depression may only be manifest under adverse environmental conditions.     

Temporal variability in winter travel patterns of Yellowstone bison: the effects of road grooming.

The influence of winter recreation on wildlife in Yellowstone National Park (YNP), Wyoming and Montana, USA, is a controversial issue. In particular, the effects of road grooming, done to facilitate snowmobile and snowcoach travel, on bison (Bison bison) ecology are under debate. We collected data during winters, from 1997 to 2005, on bison road use, off-road travel, and activity budgets to quantify temporal trends in the amount of bison road and off-road travel and to identify the ecological factors affecting bison movements and use of the groomed road system in the Madison-Gibbon-Firehole (MGF) area of YNP. Using model comparison techniques, we found bison travel patterns to be influenced by multiple, interacting effects. Road travel was negatively correlated with road grooming, and we found no evidence that bison preferentially used groomed roads during winter. Snow water equivalent, bison density, and the springtime melt period were positively correlated with both bison road and off-road travel. From behavioral scans on 68,791 bison, we found that travel is only a small percentage (11%) of all bison activity, with foraging comprising 67% of observations. Also, only 7% of traveling bison and 30% of foraging bison were displacing snow, and we suggest foraging, rather than traveling, is likely the major energetic cost to bison in winter. Bison utilize their own trail network, connecting foraging areas using stream corridors, geothermal pathways, and self-groomed travel routes. Our results indicate that temporal patterns in bison road travel are a manifestation of general travel behavior and that groomed roads in the MGF do not appear to be a major factor influencing bison ecology and spatial redistribution. We suggest that the changes in bison spatial dynamics during the past three decades have likely been the result of the natural phenomenon of density-dependent range expansion, rather than having been caused by the anthropogenic influence of road grooming.     

Lake eutrophication at the urban fringe,Seattle region,USA

Nutrient pollution and associated eutrophication of freshwaters threaten the ecological integrity and the services provided to humans by lakes. We examined how human residential development influenced the level of lake eutrophication in the Seattle, WA, USA, region. We surveyed 30 lakes and measured 3 indicators of eutrophication: concentrations of chlorophyll-a and phosphorus, and the proportion of algae that are inedible to zooplankton. We classified lakes based on the waste-treatment method for shoreline homes: septic, sewer, and undeveloped lakes. Septic lakes occurred along the urban-rural fringe while sewer lakes occurred near urban centers. Septic lakes were more eutrophic than sewer lakes and undeveloped lakes, as indicated by higher levels of phosphorus and chlorophyll-a. These results suggest that septic systems contribute to the high levels of eutrophication in lakes at the urban-rural fringe. Lakes at the urban-rural fringe represent an opportunity for proactive management of urban expansion to minimize lake eutrophication.     

Organic mercury levels among the Yanomama of the Brazilian Amazon Basin

The Catrimani River basin in northern Brazil is the home of the Yanomama and has been the site of renegade gold mining since 1980. Gold-mining operations release inorganic mercury (Hg) into the environment where it is organified and biomagnified in aquatic ecosystems. Ingestion of mercury-contaminated fish poses a potential hazard to fish-eating populations such as the Yanomama. We surveyed Hg levels in Yanomama villagers living near mined and unmined rivers in 1994 and 1995, and analyzed Hg levels in piranha caught by villagers. In 1994, 90 Yanomama Indians from 5 villages and in 1995, 62 Yanomama Indians from 3 villages participated in the studies. Four villages surveyed in 1994 were located directly on the Catrimani River, approximately 140-160 km downstream from past gold-mining activities. The other village surveyed in 1994 was situated on the unmined Ajaraní River. In 1995, 2 of the Catrimani River villages were revisited, and a third Yanomama village, on the unmined Pacu River, was surveyed. Blood organic mercury levels among all villagers surveyed ranged from 0 to 62.6 microg L(-1) (mean levels in each village between 21.2 microg L(-1) and 43.1 microg L(-1)). Mercury levels in piranha from the mined Catrimani River ranged from 235 to 1084 parts per billion (ppb). Nine of 13 piranhas, measuring 30 cm or longer had total mercury levels which exceeded mercury consumption limits (500 ppb) set by both the World Health Organization and the Brazilian Ministry of Health. Unexpectedly, high mercury levels were also observed in fish and villagers along the unmined Ajaraní and Pacu Rivers suggesting that indirect sources may contribute to environmental mercury contamination in the Amazon basin.     

Heavy metal removal by activated sludge: influence of Nocardia amarae.

The goal of this research was to examine the metal binding capacity of Nocardia amarae cells and to assess the influence of Nocardia cells on the overall metal binding capacity of activated sludge. Metal sorption capacities of the pure Nocardia cells and activated sludge biomass containing various levels of added Nocardia pure cultures were determined by a series of batch experiments. Batch sorption isotherms for nickel (Ni), copper (Cu), and cadmium (Cd) showed that the pure culture of N. amarae exhibited significantly higher metal sorption capacity than the activated sludge biomass obtained from Wilmington Wastewater Treatment Plant (Wilmington, DE). Surface area of biomass estimated by a dye technique showed that pure N. amarae cells growing at stationary phase have substantially more specific surface area than that of activated sludge from Wilmington Treatment Plant. A two-fold difference in specific surface area indicated that the higher metal sorption capacity of Nocardia cells may be due to the higher specific surface area. The metal sorption capacity of activated sludge increased proportionally with the amount of Nocardia cells present in the mixed liquor. This increase was attributed to the greater specific surface area of the mixed liquor samples containing greater amounts of Nocardia cells.     

Photolytic treatment of atrazine-contaminated water: products, kinetics, and reactor design.

This study investigates the products, kinetics, and reactor design of atrazine photolysis under 254-nm ultraviolet-C (UVC) irradiation. With an initial atrazine concentration of 60 microg/L (60 ppbm), only two products remain in detectable levels. Up to 77% of decomposed atrazine becomes hydroxyatrazine, the major product. Both atrazine and hydroxyatrazine photodecompose following the first-order rate equation, but the hydroxyatrazine photodecomposition rate is significantly slower than that of atrazine. For atrazine photodecomposition, the rate constant is proportional to the square of UVC output, but inversely proportional to the reactor volume. For a photochemical reactor design, a series of equations are proposed to calculate the needed UVC output power, water treatment capacity, and atrazine outlet concentration.     

Comparative toxicity of Solvent Yellow 33 [2-(2′-quinolinyl)-1,3-indandione] and Solvent Green 3 (1,4-di-p-toluidinoanthraquinone) dyes to freshwater organisms

Solvent Yellow 33 and a Solvent Green 3 mixture (30:70 mixture of Solvent Yellow 33 and Solvent Green 3) were not acutely toxic to seven of nine freshwater species when tested at the solubility limits of the dyes in freshwater. A solubility limit solution of the Solvent Green 3 mixture killed 50% of the rainbow trout tested for 96 h but was non-toxic when diluted by 50%. Both dyes caused a reduction in green algal growth at solubility limits. The Solvent Green 3 mixture was the most detrimental causing a 98–99% reduction in growth after 5 days of exposure.     

A new method for the rapid determination of volatile organic compound breakthrough times for a sorbent at concentrations relevant to indoor air quality

The use of sorbents has been proposed to remove volatile organic compounds (VOCs) present in ambient air at concentrations in the parts-per-billion (ppb) range, which is typical of indoor air quality applications. Sorbent materials, such as granular activated carbon and molecular sieves, are used to remove VOCs from gas streams in industrial applications, where VOC concentrations are typically in the parts-per-million range. A method for evaluating the VOC removal performance of sorbent materials using toluene concentrations in the ppb range is described. Breakthrough times for toluene at concentrations from 2 to 7500 ppb are presented for a hydrophobic molecular sieve at 25%) relative humidity. By increasing the ratio of challenge gas flow rate to the mass of the sorbent bed and decreasing both the mass of sorbent in the bed and the sorbent particle size, this method reduces the required experimental times by a factor of up to several hundred compared with the proposed American Society of Heating, Refrigerating, and Air-Conditioning Engineers method, ASHRAE 145P, making sorbent performance evaluation for ppb-range VOC removal more convenient. The method can be applied to screen sorbent materials for application in the removal of VOCs from indoor air.