Distribution of polycyclic aromatic hydrocarbons in marine sediments and their potential toxic effects

The presence of polycyclic aromatic hydrocarbons (PAHs) in samples of marine sediments from Paranagua Bay on the southern coast of Brazil was investigated. Paranagua Bay is the location of a major port, one of the busiest in Brazil. The region has a great potential for tourism and port-related industries and activities. Due to its characteristics as a venue for tourism, two major campaigns were planned: one 3 months before the summer (between December and February) and a second after the vacation season. Total concentration of PAHs in sediments ranged from 26.33 to 406.76 ng/g (in both campaigns). The highest values were found in sediments with higher organic carbon content. We found no substantial differences between the two campaigns, and the values are quite similar. Ternary diagrams show that points P5 and P6 were considered polluted, while others were classified as non-polluted. Molecular ratios indicate that the main sources of PAHs are petrogenic and the burning of fossil fuels. Sediment toxicity was assessed by the presence of PAHs in terms of benzo(a)pyrene (BaP) concentration. The toxicity of PAHs mixtures can be characterized more accurately by developing and establishing toxic equivalency factors (TEFs) for PAHs. Considering TEFs, the BaP_eq concentrations vary between 0.264 and 5.922 ng/g (considering both campaigns). Thus, two points are above the maximum level recommended (3 ng/g) by the Netherlands sediment quality guidelines. In fact, sites P5 and P6 apparently are exposed to a greater number of pollution sources, thus reflecting the higher concentration of PAHs compounds in sediments.     

The effect of EURO-0 vehicle substitution on polycyclic aromatic hydrocarbon and carbon monoxide concentrations in an urban area

From 1994 to 2003, daily air concentrations of particle-bound polycyclic aromatic hydrocarbons (PAHs) and carbon monoxide (CO) were regularly monitored at two traffic-oriented sampling sites (A and B) in urban Genoa, Italy. The data were used to estimate effects on air quality in real situations due to progressive substitution of EURO-0 vehicles, started in 1993, with less-polluting vehicles (EURO-1, EURO-2), mainly gasoline vehicles with a catalyst. PAH profile classification and diagnostic PAH ratios were used to identify 345 samples of predominantly traffic origin. At both sites, CO and PAH daily concentrations decreased exponentially with time and the apparent half-life values calculated were 6.3 and 5.5 for CO and 3.7 and 3.5 years for PAHs at sites A and B, respectively. At site A, monitored for traffic intensity, multiple regression analyses confirmed that daily PAH and CO concentrations were positively correlated with the number of non-catalytic vehicles estimated to cross this site during sampling and negatively correlated with seasonal variables (air temperature, ozone concentration, relative air humidity). The reduction in air pollution estimated for complete substitution of non-catalytic gasoline vehicles was 89% for BaP, 85% for total PAHs and 69% for CO.     

Determination of carbamazepine and 12 degradation products in various compartments of an outdoor aquatic mesocosm by reliable analytical methods based on liquid chromatography-tandem mass spectrometry

Environmental Science and Pollution Research - The aims of this work are to develop suitable analytical methods to determine the widely used anticonvulsant carbamazepine and 12 of its...     

Trends in the use of psychoactive substances by truck drivers in São Paulo State,Brazil: A time-series cross sectional roadside survey (2009–2016)

Objective: Truck drivers represent a group that is susceptible to the use of stimulant substances to reduce the symptoms of fatigue, which may be caused by a stressful and exhausting work environment. The use of psychoactive substances may increase the risk for involvement in road traffic crashes. Previous studies have demonstrated that amphetamine, cocaine, and cannabis are the 3 main drugs used by Brazilian truck drivers. We studied the prevalence of amphetamine, benzoylecgonine (indicating use of cocaine), and Δ-9-tetrahydrocannabinol-9-carboxylic acid (THC-COOH; indicating use of cannabis) in urine samples from truck drivers in the state of São Paulo, Brazil, using the same methodology during 8 years (2009–2016).

Methods: Samples were collected during a health program supported by the Federal Highway Police. Toxicological analyses were performed using immunoassays and gas chromatography–mass spectrometry.

Results: The total prevalence of illicit drugs was 7.8%. Benzoylecgonine was the most prevalent substance (3.6%), followed by amphetamine (3.4%) and THC-COOH (1.6%). We found the highest drug prevalence in 2010 (11.3%) and the lowest in 2011 (6.1%). We could detect a slight change in the pattern of stimulant use: until 2010, amphetamine was the most prevalent substance; however, in 2011 benzoylecgonine became the most frequently detected substance. This lasted until 2015, probably due to changes in Brazilian legislation regarding appetite suppressants; the most common one is metabolized to amphetamine.

Conclusion: These data show that the use of psychoactive substances by truck drivers in Brazil did not decrease during the study period. This reinforces the need for further preventive measures to reduce drug use among drivers, which could lead to a decrease in traffic crashes in Brazil.     

Sowing simulation tests of a pneumatic drill equipped with systems aimed at reducing the emission of abrasion dust from maize dressed seed

The utilization of dressed seed for spring sowing is a widespread practice to control some pests with reduced doses of chemical products. However some insecticides employed in maize seed dressing, namely belonging to the neonicotinoid family and fipronil, have been claimed to play a role in the decline of honeybees (Apis mellifera L.). Pneumatic drills used in maize sowing are charged with contributing to the dispersion of the abrasion dust produced by dressed seeds, favoring the contamination of the honeybee habitat. Different devices similar to air deflectors have been introduced on pneumatic drills in order to reduce dust drift. During previous field tests carried out by the authors during recent years reduction of dust concentration both in the air and at soil surface has been shown as a consequence of their application. As field tests are affected by the variability of environmental parameters (namely wind speed and direction) the results are not always reliable, comparable and of a general validity. This paper refers to a sowing simulation test system in which pneumatic drills can be tested at a fixed point under controlled conditions of the main environmental parameters. In the test area, protected by external influences, artificial wind conditions are created by means of a fan. The drill, suitably placed in the test area, operates the seed distribution "sur place" by means of an electric engine connected to the drill's driving wheel. A 22.5 m long sampling area, leeward with respect to the drill position, has been identified. Along the sampling area a series of Petri dishes has been placed, with the aim of capturing the depositing dust and providing the concentration of the active ingredients (a.i.) at ground level. At the same time, three air samplers with PTFE diskette filters have been used for the detection of the a.i. The test system has been used for the test of a pneumatic drill, equipped with and without air deflectors, using maize seed dressed with four a. i. (imidacloprid, clothianidin, thiametoxam, fipronil). The results showed regularly decreasing of the concentrations as distance increased, both in the air and at ground level. Moreover, the difference determined by the adoption of the drift reducing device (air deflectors) resulted clear and it can be quantified at around 50 % of the a.i. amounts observed without deflectors. Finally, the paper proposes a data processing method that, from the values observed at fixed point, provides the theoretical a.i. concentration behavior that would occur in field, under the same conditions of wind speed and direction and working speed. The obtained results are coherent with previous field test.     

Agricultural and green infrastructures: the role of non-urbanised areas for eco-sustainable planning in a metropolitan region

Non-Urbanised Areas (NUAs) are part of agricultural and green infrastructures that provide ecosystem services. Their role is fundamental for the minimization of urban pollution and adaptation to climate change. Like all natural ecosystems, NUAs are endangered by urban sprawl. The regulation of sprawl is a key issue for land-use planning. We propose a land use suitability strategy model to orient Land Uses of NUAs, based on integration of Land Cover Analysis (LCA) and Fragmentation Analysis (FA). With LCA the percentage of evapotranspiring surface is defined for each land use. Dimensions and densities of NUAs patches are assessed in FA. The model has been developed with Geographical Information Systems, using an extensive set of geodatabases, including orthophotos, vectorial cartographies and field surveys. The case of the municipality of Mascalucia in Catania metropolitan area (Italy), characterized by a considerable urban sprawl, is presented.     

Assessing sediment hazard through a weight of evidence approach with bioindicator organisms: a practical model to elaborate data from sediment chemistry, bioavailability, biomarkers and ecotoxicological bioassays

Quality assessments are crucial to all activities related to removal and management of sediments. Following a multidisciplinary, weight of evidence approach, a new model is presented here for comprehensive assessment of hazards associated to polluted sediments. The lines of evidence considered were sediment chemistry, assessment of bioavailability, sub-lethal effects on biomarkers, and ecotoxicological bioassays. A conceptual and software-assisted model was developed with logical flow-charts elaborating results from each line of evidence on the basis of several chemical and biological parameters, normative guidelines or scientific evidence; the data are thus summarized into four specific synthetic indices, before their integration into an overall sediment hazard evaluation. This model was validated using European eels (Anguilla anguilla) as the bioindicator species, exposed under laboratory conditions to sediments from an industrial site, and caged under field conditions in two harbour areas. The concentrations of aliphatic hydrocarbons, polycyclic aromatic hydrocarbons and trace metals were much higher in the industrial compared to harbour sediments, and accordingly the bioaccumulation in liver and gills of exposed eels showed marked differences between conditions seen. Among biomarkers, significant variations were observed for cytochrome P450-related responses, oxidative stress biomarkers, lysosomal stability and genotoxic effects; the overall elaboration of these data, as those of standard ecotoxicological bioassays with bacteria, algae and copepods, confirmed a higher level of biological hazard for industrial sediments. Based on comparisons with expert judgment, the model presented efficiently discriminates between the various conditions, both as individual modules and as an integrated final evaluation, and it appears to be a powerful tool to support more complex processes of environmental risk assessment.     

Bioaccumulation and biotransformation of arsenic compounds in Hediste diversicolor (Muller 1776) after exposure to spiked sediments

This study focused on the exposure of the common ragworm Hediste diversicolor (Müller 1776) to sediments enriched with different arsenic compounds, namely arsenate, dimethyl-arsinate, and arsenobetaine. Speciation analysis was carried out on both the spiked sediments and the exposed polychaetes in order to investigate H. diversicolor capability of arsenic bioaccumulation and biotransformation. Two levels of contamination (acute and moderate dose) were chosen for enriched sediments to investigate possible differences in the arsenic bioaccumulation patterns. The highest value of arsenic in tissues was reached after 15 days of exposure to dimethyl-arsinate (acute dose) spiked sediment (1,172?±?176 μg/g). A significant increase was also obtained in worms exposed both to arsenate and arsenobetaine. Speciation analysis showed that trimethyl-arsine oxide was the predominant chemical form in tissues of H. diversicolor exposed to all the spiked sediments, confirming the importance of this intermediate in biological transformation of arsenic.     

Ecotoxicological effects of sediments from Mar Piccolo,South Italy: toxicity testing with organisms from different trophic levels

The Mar Piccolo of Taranto (Ionian Sea, Southern Italy) is a semi-enclosed and strongly polluted basin. For decades, it has been subjected to different anthropogenic impacts. These stressors caused severe sediments contamination with high concentration of different pollutants (PAHs, PCB, heavy metals). In order to assess the current status of sediments contamination, an ecotoxicological investigation combined with chemical analysis (heavy metals, PAH, and PCB) has been performed. In order to derive ecologically relevant conclusions, a multiorganisms and multiend-points approach has been applied, exposing organisms from different trophic levels to elutriate and whole sediment. The battery of bioassays consists of a microalgal growth inhibition test (Dunaliella tertiolecta), acute and sublethal assays (end-points: mortality, immobilization and swimming speed alteration) on crustaceans larvae and juveniles, and rotifers (Amphibalanus amphitrite, Artemia salina, Corophium insidiosum and Brachionus plicatilis), and embryotoxicity test on echinoderms (Paracentrotus lividus). Considering the high levels of sediment contamination highlighted from chemical analysis, an unexpected very low toxic effect was observed, even considering the sublethal end-point (larval swimming speed alteration). The results of this study suggest a very complex contaminants dynamic in the Mar Piccolo sediments that, despite a strong level of contamination, seems to not affect in a proportional manner the biological compartment.     

Hydrogen sulphide removal from landfill gas

Control of odours should be considered to be a fundamental issue in order to site, design and manage sanitary landfills. With regard to construction and demolition (C&;D) debris, landfilling was the mainly adopted solution in many European Countries; in particular, gypsum drywalls can produce high concentrations of hydrogen sulphide (H₂S) in landfill gas ranging from 7 ppm to 100 ppm. In some cases also dangerous concentrations until to 12,000 ppm were detected. In this paper H₂S removal efficiency in a lab-scale vertical packed scrubber was investigated. Hydrogen sulphide abatement was evaluated for inlet H₂S concentrations of 1000–100–10 ppm, adjusting scrubbing liquid pH in the range 9–12.5 by means of caustic soda (NaOH 2N solution). Moreover, best operating conditions for the system were defined as well as H₂S abatement along the tower and liquid recirculation effectiveness in case of inlet H₂S concentration of 10 ppm (typical odour concentration). Results showed that pH of 11.5 in scrubbing liquid could be considered the best value for removal of different inlet H₂S concentrations, also taking into account parasitical consumption of NaOH due to CO₂ absorption. Moreover, in case of continuous working of the system at H₂S concentration of 10 ppm, strong removal efficiency was already obtained with a packed bed height of about 70 cm. Significant performances were ensured after 1 h of constant activity, consuming about 3 ml of soda per cubic meter of polluted air. Subsequently liquid blowdown was necessary.