An alternative way to determine the size distribution of airborne particulate matter

We developed and tested a methodology to extract both the size-segregated source apportionment of atmospheric aerosol and the size distribution of each detected element. The experiment is based on the parallel use of a standard low-volume sampler to collect Particulate Matter (PM) and an Optical Particle Counter (OPC). The approach is complementary to size-segregated PM sampling, and it was tested versus a 12-stage cascade impactor. Samples were collected inside the urban area of Genoa (Italy) and their elemental composition was measured by Energy Dispersive-X Ray Fluorescence (ED-XRF). Positive Matrix Factorization (PMF) was applied to time series of elemental concentrations to identify major PM sources, and both PM mass concentration and size-segregated particle number concentration were apportioned. Source profiles and temporal trends extracted by PMF were analyzed together with the OPC data to obtain the size distribution for several elements. The new methodology proved to be reliable for the PM apportionment as well as in providing the elemental concentrations in PM10, PM2.5, and PM1 (PM with aerodynamic diameter, D_ae < 10, 2.5, and 1 μm, respectively). The elemental size distributions are in good agreement with those obtained by the cascade impactor for several elements but some discrepancies, in particular for traffic emissions, are stressed and discussed in the text. The new methodology has two main advantages: it only requires standard semi-automatic sampling equipment and compositional analysis and it provides size-segregated information averaged over quite long periods (typically several months). This is particularly important since campaigns with cascade impactors are generally laborious and thus limited to short periods.     

Numerical modeling as a tool for evaluating the renewability of geothermal resources: the case study of the Euganean Geothermal System (NE Italy)

Environmental Geochemistry and Health - Renewable natural resources are strategic for reducing greenhouse gas emissions and the human footprint. The renewability of these resources is a crucial...     

Sex attractant of an arctiid moth (Utetheisa ornatrix): A pulsed chemical signal

Summary The sex attractant pheromone produced by the female of the moth Utetheisa ornatrix was shown to contain Z, Z, Z-3, 6, 9-heneicosatriene. The compound, whose structure was confirmed by synthesis, proved active in electroantennogram and field bioassays. Pheromone emission occurs discontinuously, in the form of short pulses (pulse repetition rate=1.5±0.2 pulses/s). It is argued that such temporal patterning — which had not previously been demonstrated for an airborne chemical signal — can provide close-range orientation cues to the male moth as it seeks out the female.     

A combined analysis to identify airborne PM10 sources

A two step procedure that combines an air dispersion model with a receptor model was used to identify the key sources that contribute to air levels of suspended particulate matter. The contribution to PM(10) concentrations measured at four monitoring sites in San Nicolas, Argentina, of the following sources, a thermal power plant, an integrated steel mill, motor vehicle exhaust fumes, and finally dust from paved and unpaved roads, have been analysed. Moreover, an air dispersion model was used to estimate the contribution of the thermal power plant, emissions of which have been described in depth by means of hourly fuel consumption and specific emission factors. The ratio "apportionment coefficient" was introduced to relate the contribution of this source to the measured 24 h PM(10) concentrations by analysing the frequency of occurrence of connecting winds between the power plant and each monitoring site. In San Nicolas 70% of the PM(10) sampled at three of the four monitoring sites could be attributed to the power plant in those scenarios where winds connected the facility's tall point sources with the sampling locations. The contribution to the measured PM(10) levels of the rest of the sources that are present in the analysed area was confirmed by way of receptor models. For this purpose, the multielemental composition of 41 samples was determined by Wavelength Dispersive X-ray Fluorescence analysis. In order to ascertain the underlying correlations between PM(10) samples and potential sources, Principal Component Analysis was performed on the standard matrix of composition profiles, which comprises the measured PM(10) samples being enlarged with the composition profiles of the potential contributing sources. The diagonalization of the covariance matrix was used as a screening procedure to differentiate the most likely contributing sources from those that were not significant.     

A Kinetic Study of Aerobic Propane Uptake and Cometabolic Degradation of Chloroform, cis-Dichloroethylene and Trichloroetylene in Microcosms with Groundwater/Aquifer Solids

The focus of this study was to compare the behavior of different consortiums of aerobic propane-utilizing microorganisms, with respect to both the lag time for growth after exposure to propane, and their ability to transform three chlorinated aliphatic hydrocarbons (CAHs): chloroform (CF), cis-dichloroethylene (c-DCE) and trichloroethylene (TCE). Thirty-three slurry microcosms, representing seven combinations of aquifer solids and groundwater were constructed for this study. The lag time required for establishing propane-utilizing consortiums ranged between 24 and 29 days in 6 of the 7 combinations. Kinetic tests were performed with respect to propane utilization and CAH transformation. After CAH exposure, the ability of the microorganisms to metabolize propane was significantly reduced. CF and TCE were transformed more slowly than c-DCE, the average values of the initial transformation rates being equal to 0.10 ± 0.04, 0.09 ± 0.05 and 0.98 ± 0.18 mol/(L h),respectively. CF caused the greatest reduction in propane uptake rates, whereas c-DCE exhibited an apparently reversible negative effect on propane uptake rates. The estimates of the Monod half-saturation constants relative to CF, TCE and c-DCE resulted in the 2–3 mol/L range, but were characterized by a high degree of uncertainty.     

Bioremediation of aquaculture wastewater from Mugil cephalus (Linnaeus, 1758) with different microalgae species

Current aquaculture practices have a detrimental impact on the environment, in particular due to the release of high concentration of nitrogen and phosphorus that can induce eutrophication. This study investigates and compares the capacity of three microalgae species Tetraselmis suecica, Isochrysis galbana and Dunaliella tertiolecta, in the bioremediation of grey mullet Mugil cephalus wastewater. The experiment was conducted in batch conditions for 7 days using completely mixed bubble column photobioreactors. After two days, T. suecica and D. tertiolecta were able to remove more than 90% of dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorous (DIP), whereas I. galbana removed only 32% and 79% of DIN and DIP, respectively. A higher biomass yield resulted for T. suecica (603?±?34?mg/L, mean?±?SE). This study confirms the potential to employ T. suecica in an Integrated Multi-Trophic Aquaculture system for bioremediation of wastewater and identifies D. tertiolecta as another valid candidate species. Moreover, these species can growth in unsterilized culture media, and this reduces energy consumption, costs and efforts.     

Sex differences in survival costs of reproduction in a promiscuous primate

In sexually promiscuous mammals, female reproductive effort is mainly expressed through gestation, lactation, and maternal care, whereas male reproductive effort is mainly manifested as mating effort. In this study, we investigated whether reproduction has significant survival costs for a seasonally breeding, sexually promiscuous species, the rhesus macaque, and whether these costs occur at different times of the year for females and males, namely in the birth and the mating season, respectively. The study was conducted with the rhesus macaque population on Cayo Santiago, Puerto Rico. Data on 7,402 births and 922 deaths over a 45-year period were analyzed. Births were concentrated between November and April, while conceptions occurred between May and October. As predicted, female mortality probability peaked in the birth season whereas male mortality probability peaked in the mating season. Furthermore, as the onset of the birth season gradually shifted over the years in relation to climatic changes, there was a concomitant shift in the seasonal peaks of male and female mortality. Taken together, our findings provide the first evidence of sex differences in the survival costs of reproduction in nonhuman primates and suggest that reproduction has significant fitness costs even in environments with abundant food and absence of predation.     

Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.     

Tracing groundwater circulation in a valuable mineral water basin with geochemical and isotopic tools: the case of FERRARELLE,Riardo basin,Southern Italy

Environmental Geochemistry and Health - The Riardo basin hosts groundwater exploited for the production of high quality, naturally sparkling, bottled water (e.g., Ferrarelle water), and circulating...