Comparative feeding preference of Strongylocentrotus droebachiensis (Echinoidea) for the invasive seaweed Codium fragile ssp. tomentosoides (Chlorophyceae) and four other seaweeds

Laboratory experiments conducted during 1987 on Appledore Island, Maine, USA, tested whether feeding preference or the absence of an attractant was the cause for the occurrence of beds of Codium fragile ssp. tomentosoides (herein referred to as Codium fragile) within rocky barrens grazed clear of kelp by the sea urchin Strongylocentrotus droebachiensis. Consumption of C. fragile in single-diet experiments (1 seaweed/sea urchin) was highly variable and was not significantly different from that for several other seaweeds (Agarum cribrosum, Ascophyllum nodosum, Chondrus crispus, and Laminana saccharina) important in the field diet of the green sea urchin. In multiple-diet experiments (5 seaweeds/sea urchin) significantly less Codium fragile was eaten than Chondrus crispus, but significantly more Codium fragile was eaten than A. cribrosum. Chemosensory experiments suggest that C. fragile does not attract the sea urchin. Sea urchins are unable to detect C. fragile but will eat it when they come in contact with it.     

‘Emulsion locks’ for the containment of hydrocarbons during surfactant flushing

Reversible double water in oil in water (W/O/W) emulsions were developed to contain subsurface hydrocarbon spills during their remediation using surfactant flushing. Double emulsions were prepared by emulsifying CaCl₂ solutions in canola oil, and subsequently by emulsifying the W/O emulsions in aqueous sodium alginate solutions. The formation of double emulsions was confirmed with confocal and optical microscopy. The double emulsions reversed and gelled when mixed with the surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CPB). Gels can act as ‘emulsion locks’ to prevent spreading of the hydrocarbon plume from the areas treated with surfactant flushing, as shown in sand column tests. Shear rheology was used to quantify the viscoelastic moduli increase (gelation) upon mixing the double emulsion with SDS and CPB. SDS was more effective than CPB in gelling the double emulsions. CPB and SDS could adsorb at the interface between water and model hydrocarbons (toluene and motor oil), lowering the interfacial tension and rigidifying the interface (as shown with a Langmuir trough). Bottle tests and optical microscopy showed that SDS and CPB produced W/O and O/W emulsions, with either toluene or motor oil and water. The emulsification of motor oil and toluene in water with SDS and CPB facilitated their flow through sand columns and their recovery. Toluene recovery from sand columns was quantitated using Gas-Chromatography Mass-Spectroscopy (GC-MS). The data show that SDS and CPB can be used both for surfactant flushing and to trigger the gelation of ‘emulsion locks’. Ethanol also gelled the emulsions at 100 mL/L.     

Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

Über die Wirkung von N-(4-Methyl-benzolsulfonyl)-N′-butyl-harnstoff auf die Glukose-6-Phosphatase der Leber

The Science of Nature -     

The ecological basis of boll weevil (Anthonomus grandis Boheman) management

The boll weevil (Anthonomus grandis Boheman), generally considered to be native to Mexico or Central America, spread into the southern United States of America in the late 1800s and seriously threatened the cotton industry. As there were no effective alternatives, pest control specialists studied the insect's ecology and advocated cultural practices that would disrupt its environment and maximize the benefits of natural biological and environmental controls. An ecologically orientated pest management scheme founded on cultural practices emerged well before suitable chemical control technology became available and allowed farmers to live with the weevil problem.Despite the ingenuity of the early management scheme, it frequently did not provide satisfactory boll weevil control gauged by present standards. Control of the pest thus shifted largely from an ecological to a chemical approach as effective synthetic organic insecticides became available after World War II. The chemical approach was successful for a number of years, but problems of insecticide-resistant strains of pests, secondary pest outbreaks, environmental quality, and increased costs of the insecticides have forced pest control specialists to re-emphasize the nonchemical techniques used widely against the boll weevil before World War II and to revive the ecological approach to weevil management.This article examines boll weevil ecology as related to management of the insect and reviews the status and prospects of ecologically-based weevil management techniques in the United States.