SATELLITE MICROWAVE OBSERVATIONS OF SOIL MOISTURE VARIATIONS1

ABSTRACT: Results from studies in the Illinois-Indiana and Texas-Oklahoma areas indicate that satellite microwave observations at the 1.55 cm wavelength are responsive to relative moisture variations in the near surface layer of the soil. Because significant vegetation cover absorbs the 1.55 cm microwave emission from the soil, the target area must be predominately bare soil or low density vegetation cover for meaningful measurements to result. The 25 km resolution of the satellite sensor limits application of the microwave techniques to large areas such as watersheds or agricultural districts rather than individual fields. In general, at 1.55 cm. there is an inverse relationship between microwave brightness temperature and changes in soil moisture levels (as indicated by antecedent rainfall) in agricultural regions before the planting of crops or during the early growing season when vegetation cover is sparse. Even early season observations should be of great value in deciding on the time and type of crop planting and for initial irrigation scheduling when the root zone is still in close proximity to the surface.     

Effect of water washing on the thermal behavior of rice straw

Rice straw can be used as a renewable fuel for heat and power generation. It is a viable mean of replacing fossil fuels and preventing pollution caused by open burning, especially in the areas where this residual biomass is generated. Nevertheless, the thermal conversion of rice straw can cause some operating problems such as slag formation, which negatively affects thermal conversion systems. So, the main objective of this research is studying the combustion behavior of rice straw samples collected from various regions by applying thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In addition, the thermal behavior of ashes from rice straw was also analyzed in order to detect their melting points, and ash sintering was detected at different temperatures within the range between 550 and 1000 °C. Since washing rice straw with water could reduce the content of undesirable inorganic compounds related to the ash fusibility, samples of washed rice straw were analyzed under combustion conditions to investigate its differences regarding the thermal behavior of rice straw. The results showed that rice straw washing led to a significant improvement in its thermal behavior, since it reduced the ash contents and sintering formation.     

In-situ measurements of nitrogenous nutrient uptake by kelp (Ecklonia maxima) and phytoplankton in a nitrate-rich upwelling environment

Nitrogen uptake by the kelp Ecklonia maxima Osbeck and phytoplankton was examined under different conditions of nutrient availability in a kelp bed off the Cape of Good Hope by measuring nutrient depletion in large plastic bags by the kelp and ¹⁵N uptake by phytoplankton. E. maxima took up nitrate and ammonia, but not urea, and showed only a weak preference for reduced nitrogen. Phytoplankton absorbed all three forms of nitrogen available, with a preference for ammonia and urea. Ambient nitrate concentration exhibited a marked and rapid decrease with northerly winds and an increase in response to offshore southerly winds. Nitrogen uptake by E. maxima was linearly related to ambient concentration and did not saturate even at nitrate concentrations >20g-at N l^-1, resulting in a significantly higher tissue nitrogen content under upwelling conditions. Nitrate imported by upwelling was the chief source of nitrogen utilised within the kelp bed. Locally regenerated nitrogen (ammonia and urea) was calculated to contribute only ca 4% of total nitrogen uptake during upwelling and 30% during the relaxation or downwelling phase.     

The interethnic differences of the human serum paraoxonase polymorphism analysed by a quantitative and a qualitative method †

The polymorphism of the human serum paraoxonase¹ was analyzed by two distinguished methods in six different ethnic groups (Caucasians, Mongoloids, Negroids), using (1) the Computer Method² and (2) the Carro‐Ciampi Method³‘⁴. Analysis of the response of the enzyme activities to salts resulting in low and high activity ratios.

Comparison of the results:

In Caucasians we distinguished three phenotypes by the Computer method. The polymorphism was governed by two alleles. The Hardy‐Weinberg rule for a two‐allele model was valid. Individuals belonging to the homozygotic group with low activity had a low activity ratio (Carro‐Ciampi method). With both methods a frequency between 57% and 61% was observed for this group. Individuals with medium and high activity had a high activity ratio.

In Negroids and Mongoloids samples we found (by the Computer method) a low activity group (Ghanaians 9.6%, Jamaicans 13.6%, Indonesians 6.7%, Koreans 19.6%). The Hardy‐Weinberg rule for a two‐ or three‐allele model was not valid. Individuals belonging to the low activity group had a low activity ratio, all individuals with higher activity a high activity ratio (Carro‐Ciampi method).

Our results suggest that the members of the low activity group in the three races are homozygote for an identical allele.     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

Remediation of heavy metal-contaminated forest soil using recycled organic matter and native woody plants

The main aim of this study was to determine how the application of a mulch cover (a mixture of household biocompost and woodchips) onto heavy metal-polluted forest soil affects (i) long-term survival and growth of planted dwarf shrubs and tree seedlings and (ii) natural revegetation. Native woody plants (Pinus sylvestris, Betula pubescens, Empetrum nigrum, and Arctostaphylos uva-ursi) were planted in mulch pockets on mulch-covered and uncovered plots in summer 1996 in a highly polluted Scots pine stand in southwest Finland. Spreading a mulch layer on the soil surface was essential for the recolonization of natural vegetation and increased dwarf shrub survival, partly through protection against drought. Despite initial mortality, transplant establishment was relatively successful during the following 10 yr. Tree species had higher survival rates, but the dwarf shrubs covered a larger area of the soil surface during the experiment. Especially E. nigrum and P. sylvestris proved to be suitable for revegetating heavy metal-polluted and degraded forests. Natural recolonization of pioneer species (e.g., Epilobium angustifolium, Taraxacum coll., and grasses) and tree seedlings (P. sylvestris, Betula sp., and Salix sp.) was strongly enhanced on the mulched plots, whereas there was no natural vegetation on the untreated plots. These results indicate that a heavy metal-polluted site can be ecologically remediated without having to remove the soil. Household compost and woodchips are low-cost mulching materials that are suitable for restoring heavy metal-polluted soil.     

A MODELING APPROACH FOR OPTIMUM SEDIMENT DETENTION POND DESIGN1

ABSTRACT: A design procedure to determine optimum size for a sediment detention pond is presented. The procedure is based on simulating the sediment removal efficiency of the pond in conjunction with temporal variations in rainfall and potential land use and/or management options. The simulation procedure is based on a combined probabilistic-deterministic modeling approach. The probabilistic model generates daily rainfall with hourly increments for a selected site. The deterministic model simulates sediment yield and concentration for drainage area (pond inflow) and sediment trapping efficiency of the pond. The sediment yield and concentration in pond effluent is estimated from the difference between sediment inflow to the pond and sediment trapped by the pond. As an example, the procedure is applied to determine optimum design for a sediment detention pond in a surface mined area using several pond design options and alternative mining operation/land reclamation strategies.     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

High-level arsenite removal from groundwater by zero-valent iron

The objectives of this study were to conduct batch and column studies to (i) assess the effectiveness of zero-valent iron for arsenic remediation in groundwater, (ii) determine removal mechanisms of arsenic, and (iii) evaluate implications of these processes with regard to the stability of arsenic and long-term remedial performance of the permeable reactive barrier (PRB) technology. A high concentration arsenic solution (50 mg l(-1)) was prepared by using sodium arsenite (arsenic (III)) to simulate groundwater at a heavily contaminated Superfund site in the USA. Batch studies indicate that the removal of arsenic is a two-step reaction with fast initial disappearance of arsenite followed by a slow subsequent removal process. Flow-through columns were conducted at a flow rate of 17 ml h(-1) under reducing conditions for 6.6 mo. Kinetic analysis suggested that arsenic removal behaves as a zero-order reaction at high arsenic concentrations. Arsenic removal rate constants decreased with time and arsenic breakthrough was observed in the column study. Arsenic removal capacity of zero-valent iron was determined to be approximately 7.5 mg As/g Fe. Carbonate green rust was identified from the analysis of surface precipitates; arsenite uptake by green rust may be a major mechanism responsible for arsenic remediation by zero-valent iron. Analysis of HCl-extractable arsenic from iron samples indicated that approximately 28% of arsenic was in the form of arsenate suggesting that a surface oxidation process was involved in the arsenic removal with zero-valent iron.