Field and GIS based post-tsunami assessment of Scleractinian coral cover in the Aerial Bay group of Islands, North Andaman, India

The Aerial Bay group of Islands are one of the diverse environments of Andaman & Nicobar Islands, where the coral reefs degraded much due to the natural calamity of tsunami on 26 December 2004. After this event, the entire North Andaman Islands got elevated, which resulted in the exposure of coral reefs during low tide, causing mass mortalities and destructions to this pristine environment. In order to understand the current status, bio-physical monitoring of coral reefs was carried out and compared with classified coral map of pre-tsunami period. A decline from 411.14 to 68.25 hectares (ha) of live coral area was observed in the Aerial Bay group of Islands. The dead corals and other abiotic factors (sand, mud and rubble) were observed to be 317.33 and 25.56 ha respectively, based on comparisons between ground truthed and classified pre-tsunami coral map (2004) processed in ArcGIS®. The detrended correspondence analysis of coral life form categories showed maximum cover of dead coral with algae, in comparison with the live corals. Bray-curtis cluster analysis revealed three different groups of study sites with 60 % similarity based on life-form categories within the coral reef environment.     

Semi-analytical study on environmental dispersion of settling particles in a width-independent wetland flow

Environmental Fluid Mechanics - Predicting the evolution of environmental dispersion of settling particles in wetland flows has a wide range of applications in ecological engineering. In the...     

Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor under high metal loading conditions

An-RBC reactor is highly suited to treat metallic wastewater. Metal removal is due to sulfide precipitation via sulfate reduction by SRB. Cu(II) removal was the best among the different heavy metals. Maximum metal removal is achieved at low metal loading condition. Metal removal matched well with the solubility product values of respective metal sulfide salts. This study was aimed at investigating the performance of anaerobic rotating biological contactor reactor treating synthetic wastewater containing a mixture of heavy metals under sulfate reducing condition. Statistically valid factorial design of experiments was carried out to understand the dynamics of metal removal using this bioreactor system. Copper removal was maximum (>98%), followed by other heavy metals at their respective low inlet concentrations. Metal loading rates less than 3.7 mg/L?h in case of Cu(II); less than 1.69 mg/L?h for Ni(II), Pb(II), Zn(II), Fe(III) and Cd(II) are favorable to the performance of the An-RBC reactor. Removal efficiency of the heavy metals from mixture depended on the metal species and their inlet loading concentrations. Analysis of metal precipitates formed in the sulfidogenic bioreactor by field emission scanning electron microscopy along with energy dispersive X-ray spectroscopy (FESEM-EDX) confirmed metal sulfide precipitation by SRB. All these results clearly revealed that the attached growth biofilm bioreactor is well suited for heavy metal removal from complex mixture.     

Environmental load of Cryptosporidium parvum oocysts from cattle manure in feedlots from the central and western United States

The first step in assessing the risk of water contamination by Cryptosporidium parvum oocysts from feedlot cattle (Bos taurus) production systems is to quantify the number of C. parvum oocysts present in the fecal material deposited by feedlot cattle. Our primary objective for this project was to estimate the daily environmental load of C. parvum oocysts in fecal material deposited by feedlot cattle from across the central and western USA. Our secondary goal was to genotype isolates of C. parvum from feedlot cattle to help facilitate proper identification of mammalian sources of waterborne C. parvum. Based on 5274 fecal samples from 22 feedlots in seven states (California, Washington, Colorado, Oklahoma, Texas, Nebraska, and South Dakota), we estimated a point prevalence of C. parvum of 0.99 to 1.08% in fecal material from feedlot pens from a wide range of climates and a diverse range of feedlot management systems. On average, fresh fecal material from throughout feedlot systems (recent arrivals to nearing slaughter) contained about 1.3 to 3.6 oocysts/g feces, which roughly translates to about 2.8 x 10(4) to 1.4 x 10(5) oocysts/animal per day.     

Numerical and experimental investigation of state of health of Li-ion battery

ABSTRACT

Estimation of State of Health (SoH) of Lithium-ion (Li-ion) battery is essential to predict the lifespan of batteries of an electric vehicle (EV). The efficient prediction of battery health indicates to the effective and safe operation of EV. However, delivering an effective and accurate method for the estimation of SoH in the real condition is truly a challenging task. The present study proposed a holistic procedure of combining both experimental and numerical investigations to conduct the fundamental study on coupled mechanical-electrochemical behavior of Li-ion battery. The proposed investigation highlighted the effect of stress on the capacity of the battery, considering capacity fade as an equivalent parameter to its health for real-time estimation of SoH. Finally, a simple model of Artificial Neural Network (ANN) is provided, which shows the linear dependency of stress with the SoH. The results obtained from the ANN model are validated with a Linear Regression (LR) model for a better understanding of the inspection. The predicted value of mean Square Error (MSE) and R square error in the ANN training model are found to be 0.000309 and 0.849687, respectively. Whereas for the test model, these predicted values are found to be 0.000438 and 0.819347, respectively.     

Biohythane production from organic wastes: present state of art

The economy of an industrialized country is greatly dependent on fossil fuels. However, these nonrenewable sources of energy are nearing the brink of extinction. Moreover, the reliance on these fuels has led to increased levels of pollution which have caused serious adverse impacts on the environment. Hydrogen has emerged as a promising alternative since it does not produce CO₂ during combustion and also has the highest calorific value. The biohythane process comprises of biohydrogen production followed by biomethanation. Biological H₂ production has an edge over its chemical counterpart mainly because it is environmentally benign. Maximization of gaseous energy recovery could be achieved by integrating dark fermentative hydrogen production followed by biomethanation. Intensive research work has already been carried out on the advancement of biohydrogen production processes, such as the development of suitable microbial consortium (mesophiles or thermophiles), genetically modified microorganism, improvement of the reactor designs, use of different solid matrices for the immobilization of whole cells, and development of two-stage process for higher rate of H₂ production. Scale-up studies of the dark fermentation process was successfully carried out in 20- and 800-L reactors. However, the total gaseous energy recovery for two stage process was found to be 53.6 %. From single-stage H₂ production, gaseous energy recovery was only 28 %. Thus, two-stage systems not only help in improving gaseous energy recovery but also can make biohythane (mixture of H₂ and CH₄) concept commercially feasible.     

Effect of vermicomposting on calcium, sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

Fractionation and speciation of arsenic in three tea gardens soil profiles and distribution of As in different parts of tea plant (Camellia sinensis L.)

The distribution pattern and fractionation of arsenic (As) in three soil profiles from tea (Camellia sinensis L.) gardens located in Karbi-Anglong (KA), Cachar (CA) and Karimganj (KG) districts in the state of Assam, India, were investigated depth-wise (0-10, 10-30, 30-60 and 60-100 cm). DTPA-extractable As was primarily restricted to surface horizons. Arsenic speciation study showed the presence of higher As(V) concentrations in the upper horizon and its gradual decrease with the increase in soil depths, following a decrease of Eh. As fractionation by sequential extraction in all the soil profiles showed that arsenic concentrations in the three most labile fractions (i.e., water-soluble, exchangeable and carbonate-bound fractions) were generally low. Most arsenic in soils was nominally associated with the organic and Fe-Mn oxide fractions, being extractable in oxidizing or reducing conditions. DTPA-extractable As (assumed to represent plant-available As) was found to be strongly correlated to the labile pool of As (i.e. the sum of the first three fractions). The statistical comparison of means (two-sample t-test) showed the presence of significant differences between the concentrations of As(III) and As(V) for different soil locations, depths and fractions. The risk assessment code (RAC) was found to be below the pollution level for all soils. The measurement of arsenic uptake by different parts of tea plants corroborated the hypothesis that roots act as a buffer and hold back contamination from the aerial parts.     

Persistence of herbicide fenoxaprop ethyl and its acid metabolite in soil and wheat crop under Indian tropical conditions

The persistence of fenoxaprop ethyl {Ethyl (RS)-2-[4-(6-chloro-1,3-benzoxazol-2-yloxy) phenoxy] propionate} herbicide and its active metabolite fenoxaprop acid was investigated in soil and wheat crop. Fenoxaprop acid was prepared by alkaline hydrolysis of fenoxaprop ethyl. A HPLC method was developed in which fenoxaprop ethyl herbicide and its acid metabolite showed sharp single peak at 6.44 and 2.61 min respectively. The sensitivity of the method for ester and acid was 2 and 1 ng respectively with limit of detection of 0.1 and 0.05 μg mL^?1. The recovery of fenoxaprop ethyl and fenoxaprop acid from soil, wheat straw and grain ranged between 73.8–80.2%. In a field experiment fenoxaprop ethyl (Puma super® 10 EC) when applied to wheat crop at the rate of 120 g and 240 g a.i. ha^-1 as post emergence spray, fenoxaprop ethyl converted to fenoxaprop acid. Residues of fenoxaprop ethyl and acid dissipated in soil with a half-life of 0.5 and 7.3 days, respectively. At harvest no detectable residues of fenoxaprop ethyl or acid were observed in soil, wheat grain and straw samples.     

Soil application of dinitroaniline and arylphenoxy propionic herbicides influences the activities of phosphate-solubilizing microorganisms in soil

An experiment was conducted under laboratory conditions to investigate the effect of two systemic herbicides, viz. pendimethalin (a dinitroaniline) and quizalofop (an arylphenoxy propionic acid) at their recommended field application rates (1.0?kg and 50?g active ingredient per hectare, respectively), either separately or in a combination, on growth and activities of phosphate-solubilizing microorganisms in relation to their effects on biochemical transformations and availability of organic carbon, total and available phosphorus in a Typic Haplustept soil of West Bengal, India. Application of herbicides, in general, significantly stimulated the growth and activities of phosphate-solubilizing microorganisms which increased microbial biomass resulting in higher accumulation of oxidizable organic carbon, total and available phosphorus in soil as compared to untreated control. The combined application of both the herbicides highly stimulated the proliferations of phosphate-solubilizing microorganisms, while pendimethalin alone significantly accentuated phosphate-solubilizing capacities 36.4% as compared to untreated control and retained highest amount of total phosphorus due to greater microbial activities in soil. The separate application of quizalofop also manifested an induced effect on the proliferations of phosphate-solubilizing microorganisms and accounted significant amounts of organic carbon and available phosphorus in the soil system. The results of the present study thus indicated that the cited herbicides at their field application rates can be safely used to eradicate weeds in the crop fields.