Evidence of the water-cage effect on the photolysis of NO3− and FeOH2+. Implications of this effect and of H2O2 surface accumulation on photochemistry at the air–water interface of atmospheric droplets

Experiments are conducted to determine the effect of a cage of water molecules on the photolysis quantum yields of nitrate, FeOH²⁺, and H₂O₂. Results suggest that the quantum yields of nitrate and FeOH²⁺ are decreased by the recombination of photo-fragments ( OH +  NO₂ and Fe²⁺ +  OH, respectively) before they leave the surrounding cage of water molecules. However, no evidence is found for an enhanced quantum yield for H₂O₂. Therefore, the photolysis of nitrate and FeOH²⁺ could be enhanced if the cage of the solvent molecules is incomplete, as is the case at the air–water interface of atmospheric droplets. The photolysis rate constant distribution within nitrate, FeOH²⁺, and H₂O₂ aerosols is calculated by combining the expected quantum yield data in the bulk and at the interface with Mie theory calculations of light intensity. The photolysis rate constant of nitrate and FeOH²⁺ would be significantly higher at the surface than in the bulk if quantum yields are enhanced at the surface. In the case of H₂O₂, the photolysis rate constant would be enhanced by surface accumulation. The results concerning the expected rates of photolysis of these photoactive species are applied to the assessment of the reaction between benzene and OH in the presence of OH scavengers in an atmospherically relevant scenario. For a droplet of 1 μm radius, a large fraction of the total OH-benzene reaction (15% for H₂O₂, 20% for nitrate, and 35% for FeOH²⁺) would occur in the surface layer, which accounts for just 0.15% of the droplet volume.     

Shape-dependent bactericidal activity of TiO2 for the killing of Gram-negative bacteria Agrobacterium tumefaciens under UV torch irradiation

This paper demonstrated the relative bactericidal activity of photoirradiated (6W-UV Torch, λ?>?340 nm and intensity?=?0.64 mW/cm²) P25–TiO₂ nanoparticles, nanorods, and nanotubes for the killing of Gram-negative bacterium Agrobacterium tumefaciens LBA4404 for the first time. TiO₂ nanorod (anatase) with length of 70–100 nm and diameter of 10–12 nm, and TiO₂ nanotube with length of 90–110 nm and diameter of 9–11 nm were prepared from P-25 Degussa TiO₂ (size, 30–50 nm) by hydrothermal method and compared their biocidal activity both in aqueous slurry and thin films. The mode of bacterial cell decomposition was analyzed through transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR), and K⁺ ion leakage. The antimicrobial activity of photoirradiated TiO₂ of different shapes was found to be in the order P25–TiO₂?>?nanorod?>?nanotube which is reverse to their specific surface area as 54?<?79?<?176 m² g^?1, evidencing that the highest activity of P25–TiO₂ nanoparticles is not due to surface area as their crystal structure and surface morphology are entirely different. TiO₂ thin films always exhibited less photoactivity as compared to its aqueous suspension under similar conditions of cell viability test. The changes in the bacterial surface morphology by UV-irradiated P25–TiO₂ nanoparticles was examined by TEM, oxidative degradation of cell components such as proteins, carbohydrates, phospholipids, nucleic acids by FT-IR spectral analysis, and K⁺ ion leakage (2.5 ppm as compared to 0.4 ppm for control culture) as a measure of loss in cell membrane permeability.     

Susceptibility of epigeic earthworm Eisenia fetida to agricultural application of six insecticides

Ecotoxicological risks of agricultural application of six insecticides to soil organisms were evaluated by acute toxicity tests under laboratory condition following OECD guidelines using the epigeic earthworm Eisenia fetida as the test organism. The organochlorine insecticide endosulfan (LC₅₀ - 0.002 mg kg⁻¹) and the carbamate insecticides aldicarb (LC₅₀ - 9.42 mg kg⁻¹) and carbaryl (LC₅₀ - 14.81 mg kg⁻¹) were found ecologically most dangerous because LC₅₀ values of these insecticides were lower than the respective recommended agricultural dose (RAD). Although E. fetida was found highly susceptible to the pyrethroid insecticide cypermethrin (LC₅₀ - 0.054 mg kg⁻¹), the value was higher than its RAD. The organophosphate insecticides chlorpyrifos (LC₅₀ - 28.58 mg kg⁻¹), and monocrotophos (LC₅₀ - 39.75 mg kg⁻¹) were found less toxic and ecologically safe because the LC₅₀ values were much higher than their respective RAD.     

An IoT-based waste management system monitored by cloud

Clever solid waste bin is important to create a well-organized and dynamic waste management system. This paper presents the novel way of carrying out an integrated sensing system which automates the solid waste management process. The proposed smart waste bin is based on ultrasonic-level sensor and various gas sensors which automatically sense the hazardous gases and the maximum limit of waste. The approach is unique and uses cloud and mobile app-based monitoring. Two important features of work are it not only checks the maximum waste level of the bin but also checks various stinky gases. The other part of the work is conveying the information to the responsible authority. This unique approach takes the assistance of cloud sever because of its advantages in field of usability, accessibility and disaster recovery. The information can be linked with municipality web server for immediate action. The waste bins are tracked by a unique number which represents its location. The eccentric technique gives all information related to physical condition of a particular bin and can easily reach the corresponding authority. The whole information is interconnected with a cloud-based web-information system at the host server.     

Urban tinkering

Cities are currently experiencing serious, multifaceted impacts from global environmental change, especially climate change, and the degree to which they will need to cope with and adapt to such challenges will continue to increase. A complex systems approach inspired by evolutionary theory can inform strategies for policies and interventions to deal with growing urban vulnerabilities. Such an approach would guide the design of new (and redesign of existing) urban structures, while promoting innovative integration of grey, green and blue infrastructure in service of environmental and health objectives. Moreover, it would contribute to more flexible, effective policies for urban management and the use of urban space. Four decades ago, in a seminal paper in Science, the French evolutionary biologist and philosopher Francois Jacob noted that evolution differs significantly in its characteristic modes of action from processes that are designed and engineered de novo (Jacob in Science 196(4295):1161–1166, 1977). He labeled the evolutionary process “tinkering”, recognizing its foundation in the modification and molding of existing traits and forms, with occasional dramatic shifts in function in the context of changing conditions. This contrasts greatly with conventional engineering and design approaches that apply tailor-made materials and tools to achieve well-defined functions that are specified a priori. We here propose that urban tinkering is the application of evolutionary thinking to urban design, engineering, ecological restoration, management and governance. We define urban tinkering as:

A mode of operation, encompassing policy, planning and management processes, that seeks to transform the use of existing and design of new urban systems in ways that diversify their functions, anticipate new uses and enhance adaptability, to better meet the social, economic and ecological needs of cities under conditions of deep uncertainty about the future.

This approach has the potential to substantially complement and augment conventional urban development, replacing predictability, linearity and monofunctional design with anticipation of uncertainty and non-linearity and design for multiple, potentially shifting functions. Urban tinkering can function by promoting a diversity of small-scale urban experiments that, in aggregate, lead to large-scale often playful innovative solutions to the problems of sustainable development. Moreover, the tinkering approach is naturally suited to exploring multi-functional uses and approaches (e.g., bricolage) for new and existing urban structures and policies through collaborative engagement and analysis. It is thus well worth exploring as a means of delivering co-benefits for environment and human health and wellbeing. Indeed, urban tinkering has close ties to systems approaches, which often are recognized as critical to sustainable development. We believe this concept can help forge much-closer, much-needed ties among engineers, architects, evolutionary ecologists, health specialists, and numerous other urban stakeholders in developing innovative, widely beneficial solutions for society and contribute to successful implementation of SDG11 and the New Urban Agenda.

     

Effect of thiobencarb and pretilachlor on microorganisms in relation to mineralization of C and N in the Gangetic alluvial soil of West Bengal

An experiment was conducted under laboratory conditions to investigate the effect of two pre-emergence herbicides, viz., thiobencarb (at 1.5 and 4.5 kg active ingredient (a.i.) ha^?1) and pretilachlor (at 0.5 and 1.5 kg a.i. ha^?1), on the growth and multiplication of some microorganisms (bacteria, actinomycetes and fungi) in relation to transformations and availability of C and N in the Gangetic alluvial soil (Typic Haplustept) of West Bengal, India. Application of both the herbicides, in general, significantly increased microbial biomass, resulting in greater retention, mineralization and availability of oxidizable organic C and N in soil, and the stimulations were more pronounced when the herbicides were applied at their lower concentrations (recommended field application rates), more so with thiobencarb, as compared to pretilachlor. Compared to untreated control soil, the application of thiobencarb at lower concentration increased the proliferation of total bacteria, actinomycetes and fungi by 57.3, 36.6 and 55.2 %, respectively, and released the highest amount (40.2 %) of soluble NO₃ ^? in soil, while pretilachlor at field application rate induced the growth and multiplication of bacteria and fungi by 58.3 and 17.6 %, respectively. Irrespective of the concentrations, the stimulations were at par for both the herbicides towards the retention of oxidizable organic C, total N and exchangeable NH₄ ⁺ in soil.     

GIS-based statistical model for the prediction of flood hazard susceptibility

At present, flood is the most significant environmental problem in the entire world. In this work, flood susceptibility (FS) analysis has been done in the Dwarkeswar River basin of Bengal basin, India. Fourteen flood causative factors extracted from different datasets like DEM, satellite images, geology, soil and rainfall data have been considered to predict FS. Three heuristic models and one statistical model fuzzy Logic (FL), frequency ratio (FR), multi-criteria decision analysis (MCDA) and logistic regression (LR) have been used. The validating datasets are used to validate these models. The result shows that 68.71%, 68.7%, 60.56% and 48.51% area of the basin is under the moderate to very high FS by the MCDA, FR, FL and LR, respectively. The ROC curve with AUC analysis has shown that the accuracy level of the LR model (AUC?=?0.916) is very much successful to predict the flood. The rest of the models like FL, MCDA and FR (AUC?=?0.893, 0.857 and 0.835, respectively) have lesser accuracy than the LR model. The elevation was the most dominating factor with coefficient value of 19.078 in preparation of the FS according to the LR model. The outcome of this study can be implemented by local and state authority to minimize the flood hazard.

     

Co-composting of alkaline tissue digester effluent with yard trimmings

Alkaline digestion of animal carcasses is gaining popularity as a method of disposing of animals because of its very effective pathogen control and general ease of operation. Once completed, the resulting high-strength effluent can be released into the municipal sewer systems. In some cases where the municipal system is unable to handle this high-strength wastewater, alternate methods of treatment are required. Co-composting with a low-moisture substrate such as yard trimmings can be an effective option. This paper reports the results of absorption tests to determine the amount of digester effluent (from the Tissue Digestortrade mark process) that can be added to yard waste before leachate production begins. In addition, a low dosage of liquid effluent was added to yard trimmings and composted in laboratory bioreactors. Results show that leachate production begins when 0.6L-effluent is added per kg-unamended yard waste at an original moisture content of 55.6%. The amount of leachate produced increases exponentially following the empirical equation: leachate in mL/kg=0.145 e(6.007Effluent dosage in L/kg) (valid in the effluent addition range of 0-1.2L/kg). Composting of yard waste with effluent showed that the initial pH did not inhibit microbial activity up to 9.39 pH. Variability was high and there was no statistically significant difference in dry matter degradation between treatments (measured range was 1.3-6.0% of initial dry matter). Final compost had nitrogen and phosphorus concentrations of approximately 1% and 0.1%, respectively. The potassium concentration increased with increasing effluent addition and was 1.84% in the 0.2-L/kg treatment. All regulated heavy metals were several-fold below US EPA limits.     

Concentrations of chlorinated and brominated contaminants and their metabolites in serum of harbour seals and harbour porpoises

Harbour seals (Phoca vitulina) and harbour porpoises (Phocoena phocoena) are top predators in the North Sea and consequently accumulate a variety of pollutants in their tissues. Concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and their hydroxylated metabolites (HO-PCBs and HO-PBDEs) were measured in serum of wild harbour seals (n = 47) and captive harbour porpoises (n = 21). Both species exhibit long life spans and do not have extreme situations, such as complete fasting during periods of lactation, in their annual cycles. For PCBs, concentrations in adult males were slightly higher than in juveniles and lowest in juvenile females. For PBDEs, juveniles have higher levels than adult males and females, probably as a consequence of lactational transfer. However, differences between these age–gender groups were not statistical significant, indicating that individual variation was limited within each species, even without knowing the feeding status of the animals. Body condition, particularly emaciation, has a major influence on the levels of chlorinated and brominated contaminants in serum. Profiles of PCBs were CB 153 > CB 138 > CB 187 > CB 180 and CB 153 > CB 138 > CB 149 > CB 187 > CB 180 for harbour seals and porpoises respectively. For PBDEs, BDE 47 was the predominant congener followed by BDE 100 and 99 in both species. In harbour seals, concentrations of sum PCBs (median: 39,200 pg/ml) were more than 200 times higher than levels of sum PBDEs (median: 130 pg/ml) and almost 10 times higher than concentrations of sum HO-PCBs (4350 pg/ml). In harbour porpoises, concentrations of sum PCBs (median: 24,300 pg/ml) were about 20 times higher than concentrations of PBDEs (median: 1300 pg/ml). HO-PCBs were detected in only 4 harbour porpoises and this at very low concentrations. Naturally-produced MeO-PBDEs were only found in harbour porpoises at concentrations ranging from 120 to 810 pg/ml. HO-PBDEs were not found in any species. In general, harbour seals accumulate less compounds and have mostly lower concentrations than harbour porpoises possibly as a result of a better developed metabolism.