Concept of optimum basin thickness in heat exchanger–assisted solar stills

Environmental Science and Pollution Research - It is suggested by many works on solar stills that water thickness should be kept as low as possible to reduce its thermal inertia and obtain best...     

Post tsunami mangrove evaluation in coastal vicinity of Andaman Islands,India

The present study was carried out to determine the mangrove area water quality, mangrove diversity and density at Minnie Bay, Lalaji Bay and Aerial Bay (Andaman Islands, India). The physicochemical parameters such as salinity, nitrate, inorganic phosphate and total phosphorus varied significantly. Mangrove diversity was high at Minnie Bay while density at Aerial Bay. Rhizophora mucronata dominated at all three sites during the study period. Shannon-Wiener diversity index (H′?=?2.261) and Pielou’s evenness (J′?=?0.8348) were high at Minnie Bay. The higher species density cover (5.679 Nos./m²) was recorded at Aerial Bay. Bray-Curtis cluster analysis showed 63.35 % similarity and formed two clusters. Though uplift and subsidence of coastal land due to the Mw 9.3 Sumatra earthquake in 2004 has affected the mangrove vegetation, its rejuvenation was observed in the newly formed inter-tidal areas due to changes in coastal geomorphology. The comparative study on physicochemical parameters, mangrove coverage and conservation are discussed in detail.     

Measurement of the leaching behaviour of granular solid wastes

Leaching of granular solids can be described in terms of specific mass transfer functions of a simple mathematical form.

The parameters can be determined by column leaching experiments under well known flow conditions.

Initially available concentrations are obtained from batch experiments at high dilution. Total concentrations in the solids are determined independently to calculate the available fractions.

The determination of the flow pattern is done by radiotracer measurements. Leachates are analyzed by various analytical methods including AAS and INAA. Total concentrations in the solids are determined by INAA preferably.     

Modeling estuarine-shelf exchanges in a deltaic estuary: Implications for coastal carbon budgets and hypoxia

The export of wetland-derived materials to the coastal ocean (i.e., the “Outwelling” hypothesis) has received considerable attention over the past several decades. While a number of studies have shown that estuaries export appreciable amounts of nutrients and carbon, few studies have attempted to estimate the importance of estuarine sources for the coastal carbon budgets in river-dominated coastal ecosystems. A novel tidal prism model was developed to examine estuarine-shelf exchanges in the Barataria estuary, a deltaic estuary located in the north-central Gulf of Mexico. This estuary has been the site of a massive wetland loss, and it has been hypothesized that carbon export from the eroding coastal wetlands supports the development of a large hypoxic zone in the coastal Gulf of Mexico. The model results show that the Barataria estuary receives nitrogen through the tidal passes and releases carbon to the coastal ocean. The mean calculated tidal water discharge of 6930 m³ s⁻¹ is equivalent to about 43% of the lower Mississippi River discharge. The annual total organic carbon (TOC) export is 109 million kg, or 57 gC m² yr⁻¹ when prorated to the total water area of the estuary. This carbon export is equivalent to a loss of 0.5 m of wetland soil horizon over an area of 8.4 km², and accounts for about 34% of the observed annual wetland loss in the estuary between 1978 and 2000. Compared to the lower Mississippi River, the Barataria estuary appears to be a very small source of TOC for the northern Gulf of Mexico (2.7% of riverine TOC), and is unlikely to have a significant influence on the development of the Gulf's hypoxia.     

An Ergonomie Study on Posture-Related Discomfort Among Preadolescent Agricultural Workers of West Bengal,India

In India, particularly in West Bengal, preadolescents are primarily associated with agricultural work in rural areas. Owing to poor socio-economic conditions, they are compelled to carry out a considerable number of manual, rigorous tasks in agricultural fields. The main aim of this study was to investigate postures adopted by preadolescent agricultural workers during individual agricultural activities and to analyze the causes of discomfort related to those postures. Fifty male and 50 female preadolescent agricultural workers were randomly selected and a detailed posture analysis was performed with the Ovako Working Posture Analysis System (OWAS). It was observed that those workers worked continuously in awkward postures during certain agricultural activities. Consequently they suffered from discomfort in different parts of their body. Even though they were very young, they were likely to suffer from serious musculoskeletal disorders in the future.     

Participative Versus Assigned Production Standard Setting in a Repetitive Industrial Task: A Strategy for Improving Worker Productivity

Abstract

The participative standard with feedback condition was superior to the assigned difficult (140% of normal) standard with feedback condition in terms of worker productivity. The percentage increase in worker productivity with the participative standard and feedback condition was 46%, whereas the increase in the assigned difficult standard with feedback was 23%, compared to the control group (no standard, no feedback). Worker productivity also Improved significantly as a result of assigning a normal (100%) production standard with feedback, compared to the control group, and the increase was 12%. The participative standard with feedback condition emerges as the optimum strategy for improving worker productivity in a repetitive industrial production task.     

Isometric Pull and Push Strengths of Paraplegics in the Workspace: 2. Statistical Analysis of Spatial Factors

The effect of reach levels, horizontal angles, and vertical angles on isometric pull and push strengths of male and female was determined. Highly significant increases in men’s push strength were found between extreme to maximum reaches, and from extreme to normal reaches. However, for women’s push strength, a significant increase was found only between extreme to maximum reach. Significant or highly significant increases were found in men’s and women’s pull strength between the horizontal angle (θ) sagittal through the active shoulder (90°) and other angles (0, 45, and 135°). However, for men’s push strength, highly significant increases were found between the horizontal angle 45° from the frontal plane, and other angles. For women’s push strength, significant or highly significant increases were found between the horizontal angles 0° and angles of 90 and 135°. For men’s and women’s pull strength, significant or highly significant increases were found between the vertical angle (?), 90°, and other angles (–20, 0, and 45°). Similar increases were found for women’s push strength between the 45° angle and other angles. In the design of a workstation for paraplegics that requires pull and push forces, consideration must be given to the spatial factors.     

A combined frequency–severity approach for the analysis of rear-end crashes on urban arterials

Analysis of both the crash count and the severity of injury are required to provide the complete picture of the safety situation of any given roadway. The randomness of crashes, the one-way dependency of injury on crash occurrence and the difference in response types have typically led researchers into developing independent statistical models for crash count and severity classification. The Genetic Programming (GP) methodology adopts the concepts of evolutionary biology such as crossover and mutation in effectively giving a common heuristic approach to model the development for the two different modeling objectives. The chosen GP models have the highest hit rate for rear-end crash classification problem and the least error for function fitting (regression) problems. Higher Average Daily Traffic (ADT) is more likely to result in more crashes. Absence of on-street parking may result in diminished severity of injuries resulting from crashes as they may provide “soft” crash barrier in contrast to fixed road side objects. Graphical presentation of the frequency of crashes with varying input variables shed new light on the results and its interpretation. Higher friction coefficient of roadways result in reduced frequency of crashes during the morning peak hours, with the trend being reversed during the afternoon peak hours. Crash counts have been observed to be at a maximum at a surface width of 30 ft. Sensitivity analysis results reflect that ADT is responsible for the largest variation in crash counts on urban arterials.     

Acute and reproductive toxicity of nano-sized metal oxides (ZnO and TiO₂) to earthworms (Eisenia fetida)

An increase in nanomaterial applications will likely lead to an increased probability of environmental exposures, raising concerns regarding the safety of these materials. Recent studies have indicated that manufactured nanomaterials, such as metal oxides, have the potential to be harmful to aquatic and terrestrial organisms. The majority of nano-metal oxide research addressing potential toxicological issues has been focused in aquatic environments with very little terrestrial data. This study characterized the acute and reproductive toxicity of zinc oxide (ZnO) and titanium dioxide (TiO(2)) to earthworms (Eisenia fetida) in a terrestrial system. Following a 14 d exposure, nano-sized ZnO on filter paper was acutely toxic to E. fetida, while nano-sized TiO(2) did not exhibit acute toxicity. In contrast, neither nano-sized ZnO nor TiO(2) exhibited acute toxicity to earthworms in sand. Both nano-sized ZnO and TiO(2), following a 4 week exposure, caused reproductive effects in earthworms in artificial soil. Overall, nano-sized ZnO exhibited greater toxicity than nano-sized TiO(2) in Eisenia fetida.     

Mercury emissions and partitioning from Indian coal-fired power plants

In India coal combustion is the single largest source of emission of mercury which is a wide-spread persistent global toxicant, travelling across international borders through air and water. As a party to the Minamata convention, India aims to monitor and reduce Hg emissions and stricter norms are introduced for mercury emissions from power plants (30 μg/Nm³for flue gas in stack).This paper presents the results obtained during the experimental studies performed on mercury emissions at four coal-fired and one lignite-fired power plants in India. The mercury concentration in the feed coal varied between 0.12–0.27 mg/Kg. In the mercury mass balance, significant proportion of feed coal mercury has been found to be associated with fly ash, whereas bottom ash contained very low mercury. 80%–90% of mercury was released to air through stack gas. However, for circulating fluidised bed boiler burning lignite, about 64.8% of feed mercury was found to get captured in the fly ash and only 32.4% was released to air. The mercury emission factor was found to lie in the range of 4.7–15.7 mg/GJ.