In situ ammonia removal in bioreactor landfill leachate

Although bioreactor landfills have many advantages associated with them, challenges remain, including the persistence of NH(3)-N in the leachate. Because NH(3)-N is both persistent and toxic, it will likely influence when the landfill is biologically stable and when post-closure monitoring may end. An in situ nitrogen removal technique would be advantageous. Recent studies have shown the efficacy of such processes; however, they are lacking the data required to enable adequate implementation at field-scale bioreactor landfills. Research was conducted to evaluate the kinetics of in situ ammonia removal in both acclimated and unacclimated wastes to aid in developing guidance for field-scale implementation. Results demonstrate that in situ nitrification is feasible in an aerated solid waste environment and that the potential for simultaneous nitrification and denitrification (even under low biodegradable C:N conditions) in field-scale bioreactor landfills is significant due to the presence of both aerobic and anoxic areas. All rate data fit well to Monod kinetics, with specific rates of removal of 0.196 and 0.117 mgN/day-g dry waste and half-saturation constants of 59.6 and 147 mgN/L for acclimated and unacclimated wastes, respectively. Although specific rates of ammonia removal in the unacclimated waste are lower than in the acclimated waste, a relatively quick start-up of ammonia removal was observed in the unacclimated waste. Using the removal rate expressions developed will allow for estimation of the treatment times and volumes necessary to remove NH(3)-N from recirculated landfill leachate.     

Characterizing shipboard bilgewater effluent before and after treatment

Operational discharges from oceangoing vessels, including discharges of bilgewater, release oil into marine ecosystems that can potentially damage marine life, terrestrial life, human health, and the environment. Bilgewater is a mix of oily fluids and other pollutants from a variety of sources onboard a vessel. If bilgewater cannot be retained onboard, it must be treated by an oily water separator before discharge for larger ocean-going vessels. We evaluated the effectiveness of bilgewater treatment systems by analyzing land-based type approval data, collecting and analyzing shipboard bilgewater effluent data, assessing bilgewater effluent concentrations compared to regulatory standards, evaluating the accuracy of shipboard oil content monitors relative to analytical results, and assessing additional pollution reduction benefits of treatment systems. Land-based type approval data were gathered for 20 treatment systems. Additionally, multiple samples of influent and effluent from operational bilgewater treatment systems onboard three vessels were collected and analyzed, and compared to the land-based type approval data. Based on type approval data, 15 treatment systems were performing below 5 ppm oil. Shipboard performance measurements verified land-based type approval data for the three systems that were sampled. However, oil content monitor readings were more variable than actual oil concentration measurements from effluent samples, resulting in false negatives and positives. The treatment systems sampled onboard for this study generally reduced the majority of other potentially harmful pollutants, which are not currently regulated, with the exception of some heavy metal analytes.     

Regional prediction of long-term landfill gas to energy potential

Quantifying landfill gas to energy (LFGTE) potential as a source of renewable energy is difficult due to the challenges involved in modeling landfill gas (LFG) generation. In this paper a methodology is presented to estimate LFGTE potential on a regional scale over a 25-year timeframe with consideration of modeling uncertainties. The methodology was demonstrated for the US state of Florida, as a case study, and showed that Florida could increase the annual LFGTE production by more than threefold by 2035 through installation of LFGTE facilities at all landfills. The estimated electricity production potential from Florida LFG is equivalent to removing some 70 million vehicles from highways or replacing over 800 million barrels of oil consumption during the 2010-2035 timeframe. Diverting food waste could significantly reduce fugitive LFG emissions, while having minimal effect on the LFGTE potential; whereas, achieving high diversion goals through increased recycling will result in reduced uncollected LFG and significant loss of energy production potential which may be offset by energy savings from material recovery and reuse. Estimates showed that the power density for Florida LFGTE production could reach as high as 10 Wm(-2) with optimized landfill operation and energy production practices. The environmental benefits from increased lifetime LFG collection efficiencies magnify the value of LFGTE projects.     

The influence of work‐family culture and workplace relationships on work interference with family: a multilevel model

This research tested a multilevel model examining the influence of work‐family culture and supportive workplace relationships on work interference with family. Web‐based survey data were provided by 792 information technology employees from 10 organizations. Random coefficient modeling was used to test a path model examining the relationships between work‐family culture, leader‐member exchange (LMX), coworker support, and work interference with family. The direct effects of LMX and coworker support on work interference with family were significant. The indirect effect of work‐family culture on work interference with family was also significant. Results demonstrate the value of work‐family culture in understanding supportive supervisory and coworker relationships and work interference with family and highlight the need to employ multilevel models to understand these relationships. Copyright © 2007 John Wiley & Sons, Ltd.     

Modeling microbiological and chemical processes in municipal solid waste bioreactor,part I: Development of a three-phase numerical model BIOKEMOD-3P

The numerical computer models that simulate municipal solid waste (MSW) bioreactor landfills have mainly two components – a biodegradation process module and a multi-phase flow module. The biodegradation model describes the chemical and microbiological processes. The models available to date include predefined solid waste biodegradation reactions and participating species. Some of these models allow changing the basic composition of solid waste. In a bioreactor landfill several processes like anaerobic and aerobic solids biodegradation, nitrogen and sulfate related processes, precipitation and dissolution of metals, and adsorption and gasification of various anthropogenic organic compounds occur simultaneously. These processes may involve reactions of several species and the available biochemical models for solid waste biodegradation do not provide users with the flexibility to simulate these processes by choice. This paper presents the development of a generalized biochemical process model BIOKEMOD-3P which can accommodate a large number of species and process reactions. This model is able to simulate bioreactor landfill operation in a completely mixed condition, when coupled with a multi-phase model it will be able to simulate a full-scale bioreactor landfill. This generalized biochemical model can simulate laboratory and pilot-scale operations in order to determine biochemical parameters important for simulation of full-scale operations.     

Social support and newcomer adjustment in organizations: Attachment theory at work?

Social support has been suggested as important for newcomer adjustment to an organization. The present paper reports a longitudinal study of 91 newcomers to three separate organizations. The effects of availability and helpfulness of 10 sources of social support on newcomers reports of psychological distress, satisfaction, intention to leave, and their supervisors assessment of their performance rating (N of supervisors = 41; n of ratings = 91) were examined. The availability of support activities such as offsite training sessions and business trips were found to be associated with decreased psychological symptoms. Helpfulness of various relationship supports were associated with positive adjustment. These results are discussed within the context of attachment theory and our knowledge of social support in work settings.     

Evaluation of the Impacts of Dock Structures and Land Use on Tidal Creek Ecosystems in South Carolina Estuarine Environments

Tidal creeks and their associated salt marshes are the primary link between uplands and estuaries in the southeastern region. They are also critical nursery and feeding grounds. In addition, the uplands surrounding creeks are preferred sites for homebuilding because of their natural beauty and the ability to access the estuary from a personal dock structure. The objective of this study was to evaluate the cumulative impacts of docks on tidal creek nursery habitats for both small and large tidal creeks. The number of docks was associated with the amount of impervious cover in both small and large creeks. The presence of docks had little measurable effect on sediment metal concentrations at the scale of small and large creeks. In small and large creeks, sediment polycyclic aromatic hydrocarbon (PAH) concentrations were related to the human activity in the upland that includes the presence of docks at the scale of small and large creeks. Some impacts on the benthic community were associated with docks and human activity in small creeks but not in large creeks. Suburban development may reduce fish and crustacean abundances, but the dock may potentially mediate the development effect. Individually, the harm to the marine environment resulting from dock shading, chrominated copper arsenate leachates, and PAH contamination was small at the scale of tidal creeks. However, impacts from dock structures could not be separated from anthropogenic watershed-scale effects. These results demonstrate that suburban development with its accompanying dock construction does represent a major source of environmental degradation to tidal creeks and associated salt marsh habitats.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.     

An Analysis of Spatial Clustering and Implications for Wildlife Management: A Burrowing Owl Example

Analysis tools that combine large spatial and temporal scales are necessary for efficient management of wildlife species, such as the burrowing owl (Athene cunicularia). We assessed the ability of Ripley’s K-function analysis integrated into a geographic information system (GIS) to determine changes in burrowing owl nest clustering over two years at NASA Ames Research Center. Specifically, we used these tools to detect changes in spatial and temporal nest clustering before, during, and after conducting management by mowing to maintain low vegetation height at nest burrows. We found that the scale and timing of owl nest clustering matched the scale and timing of our conservation management actions over a short time frame. While this study could not determine a causal link between mowing and nest clustering, we did find that Ripley’s K and GIS were effective in detecting owl nest clustering and show promise for future conservation uses.     

Prenatal diagnosis of a homologous Robertsonian translocation involving chromosome 15

We report the prenatal diagnosis of a fetus with a de novo Robertsonian translocation: 45,XY,der(15;15)(q10;q10). Although Robertsonian translocations are common chromosomal rearrangements, those involving homologous chromosomes are infrequent. Since chromosome 15 is imprinted, uniparental disomy (UPD) is a concern when chromosomal rearrangements involving chromosome 15 are identified. In the present case, UPD studies showed normal biparental inheritance. In contrast to the fact that most homologous acrocentric rearrangements are isochromosomes, these results indicate postzygotic formation of a Robertsonian translocation between biparentally inherited chromosomes 15. Copyright © 2001 John Wiley & Sons, Ltd.