Thorium(IV) Recovery from Water and Sea Water Using Surface Modified Nanocellulose/Nanobentonite Composite: Process Design

Thorium(Th) contamination in the ground water an emerging environmental issue and Th recovery from sea water and nuclear wastewater is of high significance, as it is a major player in the energy sector. For the adsorption and recovery of Th, polymer grafted bio materials are reported as most efficient materials. P(IA/MAA)-g-NC/NB was prepared and all the steps in the synthetic routes were monitored using FTIR, SEM–EDS, and XRD, TG. Efficiency in removal of Th(IV) by P(IA/MAA)-g-NC/NB was tested by batch adsorption technique. The pH dependent Th(IV) adsorption process, was optimized at 4.5 and adsorption equilibrium was achieved within 120 min. Experimental kinetic data correlates well with pseudo-second-order equation, indicates adsorption was chemical process via ion exchange followed by complexation reaction, also could explain the film diffusion process of adsorption. Sips isotherm proved to best fit for the adsorption of Th(IV) onto P(IA/MAA)-g-NC/NB with maximum adsorption capacity of 95.19 mg/g. Thermodynamic studies revealed the endothermic nature, feasibility and spontaneity of the adsorption process. ΔHx and ΔSx were decreased to a small extent from ?5.567 to ?3.439 kJ/mol and increased from 11.18 to 18.39 J/mol, respectively, with increase in surface loading from 50 to 70 mg/g, indicating that the surface of the onto P(IA/MAA)-g-NC/NB is having energetically heterogeneous surface and there may be some lateral interactions between the adsorbed Th(IV) ions Repeated adsorption–desorption study over six cycles, adsorption percentage decreases from 99.0 to 94.6 %, proved the efficiency of P(IA/MAA)-g-NC/NB as an effective adsorbent for the removal and recovery of Th(IV) from aqueous solutions. Complete removal of Th(IV) ions from seawater containing 10 mg/L with a dose of 0.25 g/L P(IA/MAA)-g-NC/NB achieved. Batch adsorption system as double stage reactor designed from the adsorption isotherm data of Th(IV) by constructing operational lines. From these could be concluded that P(IA/MAA)-g-NC/NB is a promising candidate for the effective removal and removal of Th(IV) from industrial effluents phase and sea water. The maximum adsorption capacity Qs for Ceralite IRC-50 calculated which was found to be 179.67 mg/g which are considerably lower than those for P(IA/MAA)-g-NC/NB.     

Cytogenetic monitoring of men occupationally exposed to airborne pollutants

A study of structural chromosomal aberration frequencies in peripheral blood lymphocytes was performed in a group of 20 professional drivers exposed to airborne pollutants and 20 matching controls. The subjects in the latter group were of the same sex (males) and of similar age as the exposed ones, and also had similar habits of smoking and alcohol. A statistically significant increase of chromosomal aberration was observed in the exposed subjects over the control group. An increasing trend of aberrations was observed with the duration of service (exposure) in the exposed individuals. This study clearly indicates the effect of occupational exposure to airborne pollutants.     

High individual variation in pheromone production by tree-killing bark beetles (Coleoptera: Curculionidae: Scolytinae)

Aggregation via pheromone signalling is essential for tree-killing bark beetles to overcome tree defenses and reproduce within hosts. Pheromone production is a trait that is linked to fitness, so high individual variation is paradoxical. One explanation is that the technique of measuring static pheromone pools overestimates true variation among individuals. An alternative hypothesis is that aggregation behaviour dilutes the contribution of individuals to the trait under selection and reduces the efficacy of natural selection on pheromone production by individuals. We compared pheromone measurements from traditional hindgut extractions of female southern pine beetles with those obtained by aerating individuals till they died. Aerations showed greater total pheromone production than hindgut extractions, but coefficients of variation (CV) remained high (60-182%) regardless of collection technique. This leaves the puzzle of high variation unresolved. A novel but simple explanation emerges from considering bark beetle aggregation behaviour. The phenotype visible to natural selection is the collective pheromone plume from hundreds of colonisers. The influence of a single beetle on this plume is enhanced by high variation among individuals but constrained by large group sizes. We estimated the average contribution of an individual to the pheromone plume across a range of aggregation sizes and showed that large aggregation sizes typical in mass attacks limit the potential of natural selection because each individual has so little effect on the overall plume. Genetic variation in pheromone production could accumulate via mutation and recombination, despite strong effects of the pheromone plume on the fitness of individuals within the aggregation. Thus, aggregation behaviour, by limiting the efficacy of natural selection, can allow the persistence of extreme phenotypes in nature.     

Biofilm mediated degradation of commercially available LDPE films by bacterial strains isolated from partially degraded plastic

Biodegradation is an attractive approach for the elimination of synthetic polymers, pervasively accumulated in natural environments and generating ecological problems. The present work investigated the degradation of low‐density polyethylene (PE) by three Bacillus sp., that is, ISJ36, ISJ38, and ISJ40. The degree of biodegradation was assessed by measuring hydrophobicity, viability, and total protein content of bacterial biofilm attached to the PE surface. Although all three bacterial strains were able to establish an active biofilm community on the PE surface, ISJ40 showed better affinity toward PE degradation than the other two. Bacterial colonization and physical changes on the PE surface were visualized by scanning electron microscopy. Fourier transform infrared spectroscopy analysis revealed alteration in the intensities of functional groups along with an increase in the carbonyl bond indexes. The study results suggest that the Bacillus strain ISJ40 can be used as a potential degrader for the eco‐friendly treatment of PE waste.     

Dynamics of pheromone production and communication in the mountain pine beetle, Dendroctonus ponderosae Hopkins, and the pine engraver, Ips pini (Say) (Coleoptera: Scolytidae)

Summary. The mountain pine beetle, Dendroctonus ponderosae Hopkins, and the pine engraver, Ips pini (Say), often co-exist in lodgepole pine, Pinus contorta var. latifolia Engelmann. Intra- and interspecific semiochemical communication occurs in both species and their complete semiochemical repertoire and precise dynamics of pheromone production have not been elucidated. Porapak-Q extracts of captured volatiles from beetles of each species aerated at different attack phases (freshly emerged, pioneer sex alone in the log and both sexes paired in new galleries), followed by gas chromatographic-electroantennographic detection (GC-EAD) and GC-mass spectroscopic analyses identified 17 compounds (seven compounds common to both species, six present in D. ponderosae and four present in I. pini) that excited the antennae of either or both species. Seven compounds for D. ponderosae and nine for I. pini had not been assessed for behavioural activity. In field trapping experiments, 2-phenylethanol produced by both species inhibited the response of D. ponderosae to its aggregation pheromones. exo- and endo-Brevicomin produced by D. ponderosae significantly decreased the response of I. pini to its aggregation pheromone ipsdienol. Nonanal, a ubiquitous compound found in the volatiles of lodgepole pine, various nonhosts and in both beetle species deterred the response of I. pini to ipsdienol. The occurrence of cis-verbenol, trans-verbenol and verbenone in emergent I. pini, and verbenone and 2-phenylethanol in emergent D. ponderosae suggests that these compounds may inhibit aggregation and induce dispersal following emergence. Termination of aggregation in D. ponderosae appears to depend on the production of frontalin in combination with changes in the relative ratios of verbenone, exo-brevicomin, trans-verbenol and 2-phenylethanol. In I. pini, the cessation of ipsdienol production by males is probably the main factor in terminating aggregation. Received 16 November 1999; accepted 7 August 2000     

N:P stoichiometry and transparent exopolymeric particles buffer ecological impacts of nutrients in the Ganga River: a mesocosm study

We investigated the possible drivers of the N:P stoichiometric shift and its relationship with micro-algal production of transparent exopolymeric particles (TEP) along a 35?km gradient of the Ganga River. The objective was to evaluate if the trade-off between N:P stoichiometry and production of TEP helps in maintaining water quality of the river. Mesocosm experiments were conducted to examine N:P-TEP linkages and its role in turbidity removal. In situ measurements did not show Si to be a limiting nutrient (N:Si?Aulacosira granulata and Fragilaria intermedia. Settling efficiency, turbidity removal and sedimentation of TEP, biogenic silica (BSi) and biomass all increased with decreasing N:P ratio proportionately to the amount of TEP produced in the mesocosm. The study demonstrates that trade-off between N:P stoichiometry and the production of TEP generates feedback to buffer the ecological impacts of nutrient pollution.     

Sorption of Cr(VI) from dilute solutions and wastewater by live and pretreated biomass of Aspergillus flavus

Sorption of Cr(VI) was carried out from dilute solutions using live and pretreated biomass in a batch mode. Effects of agitation time, adsorbent dosage and pH were examined. The autoclaved biomass that showed maximum adsorption capacity (Q(0)=0.335 mg g(-1)) was used as an adsorbent in column studies. The optimized flow rate of 2.5 ml min(-1) and bed height 10 cm were used to determine the effect of metal ion concentration on removal of Cr(VI). Applying the BDST model to calculate the adsorption capacity (N(0)) of column, which showed 4.56 x 10(-5), 7.28 x 10(-5), 6.89 x 10(-5), 3.07 x 10(-5), 2.80 x 10(-5)mg g(-1) for 4, 8, 12, 16 and 20 mg dm(-3) of Cr(VI), respectively. Batch sorption proved to be more efficient than the column sorption and hence batch sorption was used to remove Cr(VI) from a textile dyeing industry wastewater. The phytotoxic effect of treated and untreated wastewater was studied against Zea mays. Toxicity was reduced by 50% in the treated effluent.     

Eco-friendly synthesis of phytochemical-capped iron oxide nanoparticles as nano-priming agent for boosting seed germination in rice (Oryza sativa L.)

Environmental Science and Pollution Research - Recently the applications of engineered nanoparticles in the agricultural sector is increased as nano-pesticides, nano-fertilizers, nanocarrier for...     

Adsorptive Separation of Lysozyme from Aqueous Solutions Using Sulphonyl and Carboxyl Functionalized Stearyl Alcohol Grafted Epichlorohydrin

In the present work ability of the two novel adsorbents, sulphonyl and carboxyl functionalized stearyl alcohol-grafted epichlorohydrin, SA-g-E-SO₃H, SA-g-E-COOH; to remove lysozyme (LYZ) from aqueous solution was assessed. The adsorbent characterization was done using FTIR, XRD, SEM and TGA analyses. The adsorption efficiency was influenced by solution pH and the optimum operating pH was found to be 4.0 for SA-g-E-SO₃H and 5.0 for SA-g-E-COOH and their adsorption efficiency was evaluated using the various isotherm and kinetics models. The Sips isotherm model and pseudo-second-order kinetic model were found to be the best for describing the equilibrium and kinetic behaviors of the adsorption process. Batch adsorption/desorption studies in acidic medium, for over six cycles showed excellent regeneration capability of the adsorbents and could lead to the development of viable and promising technology for the adsorptive recovery of LYZ from aqueous solutions. The efficiency of the adsorbents for the LYZ adsorption was verified using egg white. The result obtained from this study revealed that adsorption ability of 25 mg of SA-g-E-COOH is 98.4 % which is more than that of SA-g-E-SO₃H (96.2 %). The efficiency of SA-g-E-SO₃H to remove LYZ from aqueous solution was found to be higher compared to SA-g-E-COOH.     

Copper Availability and Accumulation by Portulaca Oleracea Linn. Stem Cutting

The Cu accumulation capacity of stem cuttings of Portulaca oleracea was assessed in two different soils, alfisol and vertisol, which differ from each other mainly due to their clay content~— several fold lower in the former than in the latter. The DTPA extractable concentration of Cu in soil and the level of its accumulation in stem cuttings were, therefore, greater in alfisol than in vertisol. In the mixed soils, the DTPA extractable as well as plant accumulated levels of Cu decreased with an increase in the proportion of vertisol. With an increase in the soil available and plant accumulated Cu, a decrease has been observed in the ability of stem cuttings to regenerate leaves and roots. As a consequence biomass reduction has been observed with an increase in the concentration of Cu in the soil and plant body. In view of comparatively low availability of Cu in vertisol, regeneration of stem cuttings occurred up to a concentration of 1600 $μ gofCu/gofsoil, whereasinalfisolitoccurredonlyupto200μ g of Cu/g of soil. The results of the present study showed that P. oleracea stem cutting is an accumulator of Cu and the availability of Cu in soils could be manipulated through addition of clay since the plant available concentration of Cu is less in the soil (vertisol) with high clay content.