Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.     

Attenuation potentials of royal jelly against hydroxyurea-induced infertility through inhibiting oxidation and release of pro-inflammatory cytokines in male rats

Environmental Science and Pollution Research - Hydroxyurea (HDU), a class of antineoplastic drugs, has a powerful efficacy in the treatment of several types of malignancies. However, it has...     

Chlorinated guaiacols and catechols bioaccumulation potential in bleaks (Alburnus alburnus, Pisces) and reproductive and toxic effects on the har-pacticoid Nitocra spinipes (Crustacea)

The bioaccumulation potential in bleaks (Alburnus alburnus, Pisces) and acute toxic and reproductive effects on Nitocra spinipes (Crustacea), of 4,5,6-trichloroguaiacol (I), tetrachloroguaiacol (II) and tetrachlorocatechol (III) was investigated. Continuous flow tests with I and II (10 μg/l) gave a rapid bi-phasic uptake in the fish with I and II reaching a level of 4 μg/g fresh weight after 14 d. An equally rapid excretion was determined with the detection limit of I and II being reached after 10 days in pure water. The 96-h LC50 values for I, II and III to N. spinipes was determined to 5.2, 3.9 and 3.3 mg/l, respectively, in static tests. The fecundity of N. spinipes was reduced to 50 % of the control values at 37±6 and 54±4 μg/l (II) per liter in static and continuous flow tests, respectively.     

The fate of endosulfan in aquatic ecosystems

Endosulfan, one of the major pesticides used in cotton-growing, is of environmental concern because of its toxicity to fish and its apparent persistence in the environment. This study examines the distribution and degradation pathways for endosulfan in an aquatic system and the processes by which it is removed. In the alkaline waters of the cotton region, hydrolysis is the dominant degradation process. By this mechanism alone, the expected half-lives for the alpha- and beta-endosulfan isomers were found to be 3.6 days and 1.7 days, respectively. Partitioning studies showed, however, that the major proportion of endosulfan would associate with the sediments (log Koc(alpha) 3.6 and log Koc(beta) 4.3). Field studies confirmed the presence of high concentrations in sediments. Microcosm experiments showed that loss of endosulfan was slower than predicted from hydrolysis rates. Models are presented to explain how desorption from sediment limits the loss of endosulfan from a system.     

Petroleum and hazardous chemical spills in Newark Bay, New Jersey, USA from 1982 to 1991

Newark Bay, New Jersey, is particularly vulnerable to ecological damage from petroleum and chemical spills, as a result of the enclosed nature and shallow depth of the bay, the high frequency of shipping traffic, and the numerous chemical and petroleum transfer terminals located alongs its shores. To evaluate the potential impacts to the natural resources of this coastal estuarine ecosystem, chemical and petroleum accidents reported to the US Coast Guard (USCG) between 1982 and 1991 were compiled to determine the frequency and volume of these incidents in Newark Bay and in each of its major tributaries. Records obtained from the USCG National Response Center's computerized database indicated that more than 1453 accidental incidents, resulting in the release of more than 18 million US gallons of hazardous materials and petroleum products, occurred throughout Newark Bay during this period of time. The bulk of the materials released to the aquatic environment consisted of petroleum products, specifically No. 6 Fuel Oil (103 spills, 12 829 272 US gal) and gasoline (207 spills, 48 816 US gal). The majority of the reported incidents occurred in the Arthur Kill and its tributaries, as well as in the Kill Van Kull and the Passaic River. The results of this study indicated that the accidental discharge of petroleum and hazardous chemicals represents a significant source of chemical pollution in Newark Bay. Based on the frequency of spills and the volume of materials released to the aquatic environment, it is likely that these events are having a deleterious effect on the Newark Bay ecosystem.     

Element immobilization in refuse incinerator ashes by solidification in glass, ceramic or cement

Incineration of municipal refuse results in the production of massive quantities of fly ash and bottom ash. Toxic elements in the original refuse may be concentrated up to 40-fold in the resultant ash. There is concern that burial of such ash in landfills could result in leaching of these elements downward into groundwater. In this study, refuse ashes were incorporated into glass, ceramic and cement composites to immobilize such toxic elements. The EP Toxicity Test (1986) was used to show that extraction of such elements by simulated acid rain is effectively blocked in these new solid materials.     

Measurements of gaseous hydrogen peroxide in southern England during a photochemical episode

Simultaneous measurements of gaseous hydrogen peroxide and ozone made in southern England are reported. The hydrogen peroxide measurements are the first reported for the United Kingdom and show clear diurnal trends and correlate with ozone measurements. Measurements were made during a photochemical episode when a peak hydrogen peroxide concentration of 2.5 microg m(-3) was recorded with a simultaneous peak of 168 microg m(-3) in the ozone concentration. From observations on the rate of decay in the measured concentrations, an evening-time deposition velocity of 0.28 cm s(-1) was derived for hydrogen peroxide.