Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

基于风险矩阵和五元减法集对势的湖泊水生态健康动态诊断评估

为判断湖泊水生态健康子系统发展趋势、诊断病态因子,引进了五元减法集对势,建立生态子系统与物理化学子系统的合成矩阵得到湖泊水生态健康状态,从而提出了基于风险矩阵和五元减法集对势的湖泊水生态健康动态诊断评估方法,并应用于安徽省瓦埠湖。结果表明:瓦埠湖水生态健康状态1980—2015年呈变差趋势,2012年为微病态,2015年略有好转。五元减法集对势识别出瓦埠湖水生态健康的病态因子主要有底栖动物、浮游动物、叶绿素、COD、TN、TP和透明度,为改善瓦埠湖水生态健康的重要指标。上述风险矩阵和五元减法集对势耦合的动态诊断评估方法可为湖泊水生态健康评估提供新的思路。     

水动力对沉积物-水界面氧通量产生机制的影响

选取三峡库区支流御临河为研究对象,测量了5个水动力条件（平均流速为0.00,0.03,0.07,0.12,0.20m/s）下沉积物-水界面（SWI）氧通量的变化及水动力条件对SWI氧通量产生机制的影响.结果表明,随着平均流速的升高,SWI氧通量增加,由0.00m/s时的1.197mmol/（m²·h）增加为0.20m/s时的43.981mmol/（m²·h）,溶解氧穿透深度增加,氧进入沉积物更深处并被微生物和还原性物质所利用,沉积物耗氧量上升;当平均流速较低时,沉积物耗氧量以生物耗氧量为主,在0.00m/s与0.03m/s时生物耗氧量为氧通量的85.3%与57.7%;当水体平均流速较高,化学耗氧量与其他耗氧量中的化学过程耗氧量在氧通量中的比重逐步提高.     

基于土壤重金属特征的绿色食品产地环境评价——以重庆(江津)现代农业园区为例

以重庆市江津区现代农业园区内4种农用地类型的653个表层土样为研究对象,测定土壤重金属元素含量.依据绿色食品产地环境相关标准,采用重金属污染指数法对标准中所涉及的Cu、Cr、Cd、Hg、As和Pb共6种重金属元素开展土壤环境质量评价和潜在生态风险评价,并结合用地类型确定绿色农产品生产的适宜性土壤分区.结果表明：除元素Cu、Cr和As外,其他元素的平均含量均高于重庆市土壤背景值;除元素As和Hg外,其他元素的平均含量均高于我国土壤背景值.土壤重金属元素Cu、Cr、Cd、Hg、As和Pb的平均浓度均达到《绿色食品产地环境质量》标准要求,但Cd污染已处于安全警戒线内,应高度警惕和严格监管园区内该元素的污染.水田、旱地和果园的土壤环境均以尚清洁为主,其他园地的土壤环境以轻度污染水平为主.部分水田存在一定程度的Pb污染（轻度）、Hg污染（中度）和Cd污染（中度）,旱地存在一定程度的Hg污染（中度）和Cd污染（中度）,果园和其他园地的土壤存在一定程度的Cd的轻、中度污染.全区符合《绿色食品产地环境质量》标准要求的土壤面积为12.47km²,占农用地总面积的63.64%,旱地、果园、水田和其他园地中符合该标准的面积分别占各自总面积的84.83%、68.07%、56.51%和42.09%.4种用地类型的土壤环境生态风险水平均以低等为主,共占研究区总面积的74.70%.Cd和Hg在园区表层土壤重金属生态风险评估中占有较大的贡献率,应列为优先控制污染元素并对其生态效应开展进一步研究.     

利用HYSPLIT模型研究珠三角地区VOCs时空分布特征

于2016年在中国广东大气超级监测站,开展4个季节的VOCs长时间观测,共获得2142组有效数据,并利用HYSPLIT模型分析珠三角地区VOCs时空分布特征.结果表明,各类VOCs混合比和化学反应活性具有明显的季节变化特点.观测期间,VOCs平均浓度为（18.523±20.978）×10^-9,其中,低碳烯烃和苯系物二者混合比之和仅占46%,但贡献了85%的·OH消耗速率（L_OH）、82%的臭氧生成潜势（OFP）和97%的二次气溶胶生成潜势（SOAFP）.观测站点主要受来自北部内陆地区气团（1#）、西部内陆地区气团（2#）、台湾海峡南端气团（3#）以及南部海洋地区气团（4#）的影响.1#气团中炔烃和苯系物的混合比占比最高,分别达到10%、37%,而3#气团中低碳烷烃的浓度水平最高,达到（8.437±5.561）×10^-9.通过估算气团中VOCs的化学反应活性,可以发现,1#气团的VOCs化学反应活性最强,其对O₃和SOA的生成贡献最高.1#、2#、3#和4#气团中VOCs的化学反应活性主要由苯系物和低碳烯烃贡献.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.