Economic Benefits of Improvements in Visibility: Acid Rain Provisions of the 1990 Clean Air Act Amendments

The Acid Rain Provisions (Title IV) of the Clean Air Act Amendments of 1990 call for about a 10 million ton reduction in annual SO₂ emissions in the United States. Although the provisions apply nationwide, most of the reduction will occur in the eastern half of the country, where use of high-sulfur coal for electricity generation is most common. One potentially large benefit of Title IV is the expected improvement in visibility conditions in the eastern United States due to the reductions in secondary sul-fate aerosols. This paper combines available economic estimates of willingness to pay for improvements in visibility with current estimates of the difference between expected visibility conditions in the eastern United States with and without Title I V, to estimate the expected visibility benefits of Title IV. The results suggest an annual value of $2.3 billion (in 1994 dollars) in the year 2010, as a result of visibility improvements due to Title IV in residential areas of the eastern United States. The results also suggest a possible additional annual value for eastern U.S. residents of as much as $1-2 billion for visibility improvements at national parks in the Southeast.     

Whitefly wax as a cue for phoresy in the broad mite, <Emphasis Type="Italic">Polyphagotarsonemus latus</Emphasis>(Acari: Tarsonemidae)

Summary. Broad mite, Polyphagotarsonemus latus (Acari: Tarsonemidae) exhibits a specific phoretic relationship with whiteflies. Under field conditions most broad mites, caught in sticky traps, are attached to whiteflies. Under laboratory conditions, attachment occurs equally well in the dark and light. Mites do not differentiate between the sexes of their phoretic host Bemisia tabaci. However, mite attachment to B. tabaci is greatly diminished by washing the host with various organic solvents, chloroform in particular. The effect of whitefly waxy particles on broad mite behavior was studied using wax from the whitefly Aleyrodes singularis and from the mealybug Planococcus citri. Broad mites were not only attracted specifically to the A. singularis waxy particles-treated leaf areas but were also attached to leaf trichomes in this area. The results of this study suggests the importance of olfactory cues from the whitefly waxy particles in the recognition process of the phoretic host and/or the induction of the attachment behavior to whitefly legs or leaf trichomes.     

Quantification of human amniotic fluid constituents by high resolution proton nuclear magnetic resonance (NMR) spectroscopy

We have investigated the ability of high-resolution proton NMR spectroscopy to provide a biochemical constituent screening of human amniotic fluid (AF). Proton NMR spectra were obtained at 300 MHz on AF from patients undergoing amniocentesis in the mid-trimester. Only AF from normal pregnancies (normal fetal karyotype, normal a-fetoprotein levels, normal birth outcome) was used in this study. The AF supernatant was lyophilized and resuspended in deuterated water containing 0.1 mm phosphate buffer and 6.02 mm disodium maleate. Identification of low molecular weight compounds was confirmed by two-dimensional NMR spectra (primarily correlated spectroscopy, or COSY) and standard addition techniques. A broad profile of compounds were ‘NMR visible’ in a single proton spectrum, including creatinine, glucose, organic acids (acetate, citrate, and lactate) and several amino acids (alanine, histidine, leucine, phenylalanine, tyrosine and valine). The proton spectrum was unaffected by prior freezing/thawing of AF samples. We were able to quantify compounds by comparison with an added concentration standard (maleate) at concentrations as low as 30 μm. Good agreement with literature values based on other analytical techniques was obtained.     

Reduction of Baltic Sea Nutrient Inputs and Allocation of Abatement Costs Within the Baltic Sea Catchment

The Baltic Sea Action Plan (BSAP) requires tools to simulate effects and costs of various nutrient abatement strategies. Hierarchically connected databases and models of the entire catchment have been created to allow decision makers to view scenarios via the decision support system NEST. Increased intensity in agriculture in transient countries would result in increased nutrient loads to the Baltic Sea, particularly from Poland, the Baltic States, and Russia. Nutrient retentions are high, which means that the nutrient reduction goals of 135 000 tons N and 15 000 tons P, as formulated in the BSAP from 2007, correspond to a reduction in nutrient loadings to watersheds by 675 000 tons N and 158 000 tons P. A cost-minimization model was used to allocate nutrient reductions to measures and countries where the costs for reducing loads are low. The minimum annual cost to meet BSAP basin targets is estimated to 4.7 billion €.     

U.S. National PM2.5 Chemical Speciation Monitoring Networks—CSN and IMPROVE: Description of networks

The U.S. Environmental Protection Agency (EPA) initiated the national PM_2.5 Chemical Speciation Monitoring Network (CSN) in 2000 to support evaluation of long-term trends and to better quantify the impact of sources on particulate matter (PM) concentrations in the size range below 2.5 μm aerodynamic diameter (PM_2.5; fine particles). The network peaked at more than 260 sites in 2005. In response to the 1999 Regional Haze Rule and the need to better understand the regional transport of PM, EPA also augmented the long-existing Interagency Monitoring of Protected Visual Environments (IMPROVE) visibility monitoring network in 2000, adding nearly 100 additional IMPROVE sites in rural Class 1 Areas across the country. Both networks measure the major chemical components of PM_2.5 using historically accepted filter-based methods. Components measured by both networks include major anions, carbonaceous material, and a series of trace elements. CSN also measures ammonium and other cations directly, whereas IMPROVE estimates ammonium assuming complete neutralization of the measured sulfate and nitrate. IMPROVE also measures chloride and nitrite. In general, the field and laboratory approaches used in the two networks are similar; however, there are numerous, often subtle differences in sampling and chemical analysis methods, shipping, and quality control practices. These could potentially affect merging the two data sets when used to understand better the impact of sources on PM concentrations and the regional nature and long-range transport of PM_2.5. This paper describes, for the first time in the peer-reviewed literature, these networks as they have existed since 2000, outlines differences in field and laboratory approaches, provides a summary of the analytical parameters that address data uncertainty, and summarizes major network changes since the inception of CSN.

ImplicationsTwo long-term chemical speciation particle monitoring networks have operated simultaneously in the United States since 2001, when the EPA began regular operations of its PM_2.5 Chemical Speciation Monitoring Network (IMPROVE began in 1988). These networks use similar field sampling and analytical methods, but there are numerous, often subtle differences in equipment and methodologies that can affect the results. This paper describes these networks since 2000 (inception of CSN) and their differences, and summarizes the analytical parameters that address data uncertainty, providing researchers and policymakers with background information they may need (e.g., for 2018 PM_2.5 designation and State Implementation Plan process; McCarthy, 2013) to assess results from each network and decide how these data sets can be mutually employed for enhanced analyses. Changes in CSN and IMPROVE that have occurred over the years also are described.     

Mineralogical variables that control the antibacterial effectiveness of a natural clay deposit

As antibiotic-resistant bacterial strains emerge and pose increased global health risks, new antibacterial agents are needed as alternatives to conventional antimicrobials. Naturally occurring antibacterial clays have been identified which are effective in killing antibiotic-resistant bacteria. This study examines a hydrothermally formed antibacterial clay deposit near Crater Lake, OR (USA). Our hypothesis is that antibacterial clays buffer pH and Eh conditions to dissolve unstable mineral phases containing transition metals (primarily Fe²⁺), while smectite interlayers serve as reservoirs for time release of bactericidal components. Model pathogens (Escherichia coli ATCC 25922 and Staphylococcus epidermidis ATCC 14990) were incubated with clays from different alteration zones of the hydrothermal deposit. In vitro antibacterial susceptibility testing showed that reduced mineral zones were bactericidal, while more oxidized zones had variable antibacterial effect. TEM images showed no indication of cell lysis. Cytoplasmic condensation and cell wall accumulations of <100 nm particles were seen within both bacterial populations. Electron energy loss analysis indicates precipitation of intracellular Fe³⁺-oxide nanoparticles (<10 nm) in E. coli after 24 h. Clay minerals and pyrite buffer aqueous solutions to pH 2.5–3.1, Eh > 630 mV and contain elevated level (mM) of soluble Fe (Fe²⁺ and Fe³⁺) and Al³⁺. Our interpretation is that rapid uptake of Fe²⁺ impairs bacterial metabolism by flooding the cell with excess Fe²⁺ and overwhelming iron storage proteins. As the intracellular Fe²⁺ oxidizes, it produces reactive oxygen species that damage biomolecules and precipitates Fe-oxides. The ability of antibacterial clays to buffer pH and Eh in chronic non-healing wounds to conditions of healthy skin appears key to their healing potential and viability as an alternative to conventional antibiotics.     

Survey of the occurrence of residues of methyl tertiary butyl ether (MTBE) in Dutch drinking water sources and drinking water

An indicative survey has been carried out in The Netherlands investigating the presence of methyl tertiary butyl ether (MTBE) in drinking water and the corresponding sources. In total, 71 different sites used for the preparation of drinking water in The Netherlands were sampled in two successive seasons in 2001 involving the analysis of 156 samples. (ground water (n = 88), surface water (n = 17), bank filtrate water (n = 6) and drinking water (n = 45)). To combine high sample throughput with high selectivity and sensitivity, off-line purge and trap for sampling and gas chromatography mass spectrometry equipped with an automated thermal desorption sampler (TDS-GC-MS) was selected as the preferred analytical methodology. The developed procedure enabled the analysis of at least 40 samples per day and provided a limit of quantification of 2 ng l(-1). In the first period 63 samples of raw water were analyzed. Concentrations ranged between < 10 ng l(-1) and 420 ng l(-1) with a median concentration below 10 ng l(-1). The second period was focused at the re-sampling of positive locations (MTBE > 10 ng l(-1)) and a few additional drinking water utilities of which both the raw and drinking water of the utilities were analyzed. The median concentration of MTBE in the selected set of drinking water samples was 20 ng l(-1) (n = 45). At one location MTBE was found at a level of 2900 ng l(-1) caused by point source contamination of the ground water (11 900 ng l(-1)). Special attention has been paid to the quality of the results by analyzing all samples in duplicate and the analysis of control samples during each series of analyses.     

Additional steps in mechanical recyling of PET

This study presents the laboratory scale results of an extra step in Poly (ethylene terephthalate) – PET mechanical recycling (grinding, washing, drying and reprocessing): a chemical washing after the conventional one. Cooking oil PET bottle flakes were washed in water and then subjected to a reaction with an aqueous solution of sodium hydroxide 5 M at 90 °C for 10 min (chemical washing). After rinsing and drying, the flakes were characterized by thermogravimetry, gas chromatography and elemental analysis tests. The results indicated that the chemically washed material had higher purity than PET washed only with water: 99.3% and 96.7%, respectively, which undoubtedly implies properties, applications and prices closer to those of virgin resin. The production of purified terephthalic acid (TPA) from the chemical washing residue was optimized and reached a purity of 99.6%. Despite the results, the use of chemically washed PET and of TPA obtained is not recommended for direct contact with food, since they still contain some impurities.     

Achieving forest carbon information with higher certainty: A five-part plan

International negotiations on the inclusion of land use activities into an emissions reduction system for the UN Framework Convention on Climate Change (UNFCCC) have been partially hindered by the technical challenges of measuring, reporting, and verifying greenhouse gas (GHG) emissions and the policy issues of leakage, additionality, and permanence. This paper outlines a five-part plan for estimating forest carbon stocks and emissions with the accuracy and certainty needed to support a policy for Reducing Emissions from Deforestation and forest Degradation, forest conservation, sustainable management of forests, and enhancement of forest carbon stocks (the REDD-plus framework considered at the UNFCCC COP-15) in developing countries. The plan is aimed at UNFCCC non-Annex 1 developing countries, but the principles outlined are also applicable to developed (Annex 1) countries. The parts of the plan are: (1) Expand the number of national forest carbon Measuring, Reporting, and Verification (MRV) systems with a priority on tropical developing countries; (2) Implement continuous global forest carbon assessments through the network of national systems; (3) Achieve commitments from national space agencies for the necessary satellite data; (4) Establish agreed-on standards and independent verification processes to ensure robust reporting; and (5) Enhance coordination among international and multilateral organizations.