EVALUATING DIRECT BENEFIT ESTIMATION PROCEDURES FOR IRRIGATION PROJECTS: A SIMPLIFIED APPROACH1

ABSTRACT: An integral part of evaluating the net benefits generated by an existing or proposed irrigation project is the assessment of the associated impacts in commodity markets. Traditionally, these impacts have been measured by either assuming no change in commodity prices and calculating net returns to project farmers, or by allowing commodity prices to fall in accordance with a given elasticity of demand and subtracting commodity production costs from the associated area under the commodity demand curve. In either case, it is implicitly assumed that supply is perfectly inelastic. This article establishes that traditional approaches to measuring direct benefits are biased. Formulae are presented for calculating the maximum absolute and relative error which may result from using these techniques as a function of project size. Direct benefit estimates are then evaluated for three irrigation projects in Nebraska, illustrating how these results can be used to improve project evaluation procedures.     

Design and performance of a dynaniic gas flux chamber

Chambers are commonly used to measure the emission of many trace gases and chemicals from soil. An aerodynamic (flow through) chamber was designed and fabricated to accurately measure the surface flux of trace gases. Flow through the chamber was controlled with a small vacuum at the outlet. Due to the design using fans, a partition plate, and aerodynamic ends, air is forced to sweep parallel and uniform over the entire soil surface. A fraction of the air flowing inside the chamber is sampled in the outlet. The air velocity inside the chamber is controlled by fan speed and outlet suction flow rate. The chamber design resulted in a uniform distribution of air velocity at the soil surface. Steady state flux was attained within 5 min when the outlet air suction rate was 20 L/min or higher. For expected flux rates, the presence of the chamber did not affect the measured fluxes at outlet suction rates of around 20 L/min, except that the chamber caused some cooling of the surface in field experiments. Sensitive measurements of the pressure deficit across the soil layer in conjunction with measured fluxes in the source box and chamber outlet show that the outflow rate must be controlled carefully to minimize errors in the flux measurements. Both over- and underestimation of the fluxes are possible if the outlet flow rate is not controlled carefully. For this design, the chamber accurately measured steady flux at outlet air suction rates of approximately 20 L/min when the pressure deficit within the chamber with respect to the ambient atmosphere ranged between 0.46 and 0.79 Pa.     

PENN STATE URBAN RUNOFF MODEL TO PINPOINT FLOOD PEAK SOURCE LOCATION1

ABSTRACT: The Penn State Urban Runoff Model, developed in 1976, is described in this paper. Aside from locating infiltration and detention basin operation in an unconventional manner, the model includes a peak flow presentation table which identifies watershed subareas chiefly responsible for the occurrence of flooding conditions at certain points in the watershed. The results of a case study on an urban drainage basin in the Philadelphia area is discussed, and preferred sites for retention ponds are suggested. The simplicity of the Penn State model is pointed out and computer run costs between 10 and 20 percent of the corresponding cards for HEC-I and SWMM are cited.     

Importance of insects in environmental impact assessment

Insects are particularly suited for use in environmental impact assessment (e.i.a.) because of their high species diversity, ubiquitous occurrence, and importance in the functioning of natural ecosystems. Examples are given of the use of insects in the predictive phase of e.i.a., in the monitoring and assessment phase, and in the much rarer instance of an e.i.a. that includes both of these phases. The importance of working at the species level to understanding the results of e.i.a. is emphasized.     

Evaluation of soil-washing process for “unwashable” clays and silts from the palmerton zinc site

The Palmerton Zinc Site is a Superfund site in Palmerton, Pennsylvania. Its former mineral processing operations have contaminated nearby wells and soils with zinc and cadmium. Preliminary analysis of soil and dust sampling conducted in May 1991 has revealed that the dust poses a potential threat to human health. Based on the results of a previous study, which showed a high percentage of silt and clay in soils from Palmerton residential properties, it was concluded that soil washing is not likely to be a viable method to treat the soil and dust contamination in Palmerton. However, since the completion of this study, a soil-washing process for “unwashable” clays and silts has been developed. A residential soil sample from Palmerton, which had low concentrations of arsenic, cadmium, and lead, and a somewhat high concentration of zinc, was washed in a bench-scale version of this process. The results showed that the new soil-washing process for “unwashable” clays and silts may be a viable method to treat the soil and dust contamination in Palmerton, depending on the soil quality criteria concentrations selected for site cleanup.     

Environmental management in the pharmaceutical industry: integrating corporate responsibility and business strategy

International pharmaceutical companies are becoming increasingly proactive in their approach to environmental management, and the results so far are impressive. The forces that affect the global pharmaceutical industry will most likely push these companies toward even greater commitments to environmental improvement and, ultimately, sustainability. © 2000 John Wiley & Sons, Inc.