A harvest failure approach to assess the threat from an invasive species

We present the idea of using potential infringements on annual allowable harvest targets as an approach to estimate threats from invasive species to the forest products sector. The approach uses present-day harvest levels as a reference level to estimate when and where the impact of a nonnative forest pest could become economically damaging. We use a generic model that simulates spread and damage by nonnative invasive species, basic harvest and forest growth through time. The concept is illustrated with a case study of a new nonnative invasive pest, Sirex noctilio Fabricius on pine resources in eastern Canada. Impacts of invasion on wood supply, in particular, the point at which present-day harvest levels are not attainable, were identified for 77 non-overlapping geographical regions that delimit the primary wood supply areas around large mills and wood processing facilities in eastern Canada. The results identify the minimum area of a pest outbreak that could trigger harvest shortages (approximately 12.5–14 M ha of pine forests in Ontario and Quebec). Beyond this level, the amount of host resource available for harvesting in any given year declines rapidly. The failure to sustain broad-scale harvest targets may be an attractive and intuitive indicator for policy makers and regulators interested in developing control and “slow-the-spread” programs for non-native forest pests.     

Invasional meltdown: invader-invader mutualism facilitates a secondary invasion

In multiply invaded ecosystems, introduced species should interact with each other as well as with native species. Invader-invader interactions may affect the success of further invaders by altering attributes of recipient communities and propagule pressure. The invasional meltdown hypothesis (IMH) posits that positive interactions among invaders initiate positive population-level feedback that intensifies impacts and promotes secondary invasions. IMH remains controversial: few studies show feedback between invaders that amplifies their effects, and none yet demonstrate facilitation of entry and spread of secondary invaders. Our results show that supercolonies of an alien ant, promoted by mutualism with introduced honeydew-secreting scale insects, permitted invasion by an exotic land snail on Christmas Island, Indian Ocean. Modeling of land snail spread over 750 sites across 135 km2 over seven years showed that the probability of land snail invasion was facilitated 253-fold in ant supercolonies but impeded in intact forest where predaceous native land crabs remained abundant. Land snail occurrence at neighboring sites, a measure of propagule pressure, also promoted land snail spread. Site comparisons and experiments revealed that ant supercolonies, by killing land crabs but not land snails, disrupted biotic resistance and provided enemy-free space. Predation pressure on land snails was lower (28.6%), survival 115 times longer, and abundance 20-fold greater in supercolonies than in intact forest. Whole-ecosystem suppression of supercolonies reversed the probability of land snail invasion by allowing recolonization of land crabs; land snails were much less likely (0.79%) to invade sites where supercolonies were suppressed than where they remained intact. Our results provide strong empirical evidence for IMH by demonstrating that mutualism between invaders reconfigures key interactions in the recipient community. This facilitates entry of secondary invaders and elevates propagule pressure, propagating their spread at the whole-ecosystem level. We show that identification and management of key facilitative interactions in invaded ecosystems can be used to reverse impacts and restore resistance to further invasions.     

Effects of sampling error and temporal correlations in population growth on process variance estimators

Estimates of a population’s growth rate and process variance from time-series data are often used to calculate risk metrics such as the probability of quasi-extinction, but temporal correlations in the data from sampling error, intrinsic population factors, or environmental conditions can bias process variance estimators and detrimentally affect risk predictions. It has been claimed (McNamara and Harding, Ecol Lett 7:16–20, 2004) that estimates of the long-term variance that incorporate observed temporal correlations in population growth are unaffected by sampling error; however, no estimation procedures were proposed for time-series data. We develop a suite of such long-term variance estimators, and use simulated data with temporally autocorrelated population growth and sampling error to evaluate their performance. In some cases, we get nearly unbiased long-term variance estimates despite ignoring sampling error, but the utility of these estimators is questionable because of large estimation uncertainty and difficulties in estimating correlation structure in practice. Process variance estimators that ignored temporal correlations generally gave more precise estimates of the variability in population growth and of the probability of quasi-extinction. We also found that the estimation of probability of quasi-extinction was greatly improved when quasi-extinction thresholds were set relatively close to population levels. Because of precision concerns, we recommend using simple models for risk estimates despite potential biases, and limiting inference to quantifying relative risk; e.g., changes in risk over time for a single population or comparative risk among populations.     

Optimal biomass allocation in heterogeneous environments in a clonal plant—Spatial division of labor

When interconnected ramets of clonal plants are growing in heterogeneous environments, ramets may specialize to uptake locally abundant resources rather than scarce resources. This biomass allocation pattern may result in more efficient sharing of resources through physiological integration and an overall benefit to the plants (spatial division of labor; DoL).     

Swelling related to ettringite crystal formation in chromite ore processing residue

Several million tons of Chromite Ore Processing Residue (COPR) were deposited at two sites in New Jersey and Maryland, USA, and over time they exhibited extensive heaving phenomena. Ettringite, a needle-shaped mineral and an expansive mineral commonly recognized in the literature concerning cement- and soil, has been identified extensively in numerous COPR samples collected from these sites. It was therefore believed that ettringite formation and its crystal growth are strongly associated with COPR heaving. We investigated the correlation between ettringite and the heaving phenomena in COPR materials that contained no initial ettringite. Two identical COPR samples were exposed to a 4% w/w sulfate solution (25°C, 50°C) in a confined swell test apparatus. Both swell test samples were analyzed by means of X-ray powder diffraction. The peak intensities of newly formed ettringite were more pronounced in the sample tested at 50°C, and swell development was only observed in this sample. Scanning electron microscopy analyses revealed well-crystallized ettringite needles exceeding 40 μm in length for this sample, while ettringite crystals less than 15 μm in length formed in the sample tested at 25°C. Therefore, the results suggest that the quantity of ettringite and the extent of crystallization play a key role in the heave of COPR.     

Impacts of freshwater wetlands on water quality: A landscape perspective

In this article, we suggest that a landscape approach might be useful in evaluating the effects of cumulative impacts on freshwater wetlands. The reason for using this approach is that most watersheds contain more than one wetland, and effects on water quality depend on the types of wetlands and their position in the landscape. Riparian areas that border uplands appear to be important sites for nitrogen processing and retention of large sediment particles. Fine particles associated with high concentrations of phosphorus are retained in downstream wetlands, where flow rates are slowed and where the surface water passes through plant litter. Riverine systems also may play an important role in processing nutrients, primarily during flooding events. Lacustrine wetlands appear to have the least impact on water quality, due to the small ratio of vegetated surface to open water. Examples are given of changes that occurred when the hydrology of a Maryland floodplain was altered.     

Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

The first commercial supercritical water oxidation sludge processing plant

Final disposal of sludge continues to be one of the more pressing problems for the wastewater treatment industry. Present regulations for municipal sludge have favored beneficial use, primarily in land application. However, several agencies and entities have warned of potential health risks associated with these methods. Hydrothermal oxidation provides an alternative method that addresses the health concerns associated with sludge disposal by completely converting all organic matter in the sludge to carbon dioxide, water, and other innocuous materials. A hydrothermal oxidation system using HydroProcessing, L.L.C.'s HydroSolids process has been installed at Harlingen, Texas to process up to 9.8 dry tons per day of sludge. Based on a literature review, this system is the largest hydrothermal oxidation system in the world, and the only one built specifically to process a sludge. Start up of Unit 1 of two units of the HTO system began in April 2001. Early results have indicated COD conversion rates in excess of 99.9%. Harlingen Waterworks System estimates that the HydroSolids system will cost less than other alternatives such as autothermal thermophilic aerobic digestion and more traditional forms of digestion that still require dewatering and final disposal. The Waterworks intends to generate income from the sale of energy in the form of hot water and the use of carbon dioxide from the HydroSolids process for neutralization of high pH industrial effluent. The Waterworks also expects to generate income from the treatment of septage and grease trap wastes.