Multiple radon entry modeling in a house with a cellar.

Combining a computational fluid dynamics (CFD) model and a multi-zonal model, a study was carried out on radon entry through the complex substructure of a house with a cellar. The uniqueness of the radon entry problem in this type of house was due to the involvement of two radon entry routes to two chambers: the cellar and the living area of the house. Soil gas carrying radon was driven through the two routes by two coupled disturbance pressures in the chambers. The effects of temperature differences were considered as another driving force for the radon entry. Examined in this study were the effects of the geometry of the substructure, air permeability of the soil, air-tightness of the cellar shell, and cellar ventilation on radon entry to both the cellar and the living area. The ground floor covering on top of the soil outside a cellar wall increased radon entry through this wall by about 68%, as radon built up to a very high level under the covering. The effect of cellar ventilation was found as follows: the cellar ventilation created a layer of airflow in the soil under the ground floor; the flow passed over a crack in the ground floor, the entry route to the living area, diluting the radon in the area. Hence, the soil gas entering the living area carried less radon. Cellar ventilation seems more effective in reducing radon entry to the living area in a more permeable soil and leaky cellar shell; a moderate cellar ventilation condition achieved 77% reduction in radon entry to the area. When permeability of these two materials was lower and soil radon content remained the same, the chances of radon entry was also lower; hence, the indoor radon level was lower and no radon control was needed. When such soil contains high radon concentration, other mitigation measures must be sought.     

HYDROELECTRIC POWER AND SCENIC PROVISIONS OF THE 1950 NIAGARA TREATY1

ABSTRACT: An important international Niagara River management issue concerns allocation of the average 202,000 cubic feet per second river discharge for hydroelectric power and scenic purposes. Major water diversions from Niagara Falls are necessary for power production. Flow is allocated by the 1950 Niagara Treaty which is intended to maximize power benefits and preserve and enhance the scenic fals spectacle. This paper examines the extent to which the Treaty objectives have been achieved. Based on analyses of government documents, engineering data, and falls-viewing patterns, it is concluded that the 1950 Treaty led to enhancement of the falls spectacle and increased power generation. But significant additional power diversions probably are attainable without adverse effect upon the existing falls spectacle. Reducing daytime summer Horseshoe Falls flow and scheduling spring and autumn flow according to viewing patterns are possible means of increasing power diversions. Existing generating facilities could use considerably more water and the value of additional Niagara hydroelectricity is very high in terms of generation-cost savings over alternative power sources. Because of the cultural importance of the falls, Treaty modifications to permit increased power diversions are not recommended without prior public opinion sampling and on-site viewing experiments. These findings highlight the need for more careful study before long-term international agreements are concluded and illustrate the need for more flexible treaty arrangements to permit periodic adjustments for changing conditions.     

Long-term changes of heavy metal and sulphur concentrations in ecosystems of the Taymyr Peninsula (Russian Federation) North of the Norilsk Industrial Complex

The Norilsk industrial ore smelting complex (Taymyr Peninsula, Russian Federation) has significantly impacted many components of local terrestrial and aquatic environments. Whether it has had a major impact on the wider Russian Arctic remains controversial as studies are scarce. From 1986 to 2004, data on heavy metal (Cu, Ni, Zn, Hg, Cd and Hg) concentrations in fish (burbot), moss, lichens, periphyton, hydric soils and snow in and around Norilsk and the most northern parts of the Taymyr Peninsula were analysed. Very high concentrations of Cu (203 μg L?1 ± 51 μg L?1) and Ni (113 μg L?1 ± 15 μg L?1) were found in the water of the Schuchya River close to Norilsk. Heavy metal concentrations in burbot liver were highest in Lake Pyasino near Norilsk compared to other study regions that were >100 km distant. From 1989-1996, Cu (121 μg L?1 ± 39 μg L?1 SD), Zn (150 μg L?1) ± 70 μg L?1) and Ni (149 μg L?1 ± 72 μg L?1) snow concentrations were greatest in Norilsk, but were low elsewhere. By 2004, these concentrations had dropped significantly, especially for Cu-74 μg L?1 (±18.7 μg L?1 SD), Zn-81.7 μg L?1 (± 31.3 μg L?1 SD) and Ni-80 μg L?1(±18.0 μg L?1 SD). Norilsk and its surroundings are subject to heavy pollution from the Norilsk metallurgical industry but these are absent from the greater Arctic region due to the prevailing winds and the Byrranga Mountains. Pollution abatement measures have been made so further investigations are necessary in order to assess their efficiency.     

Dynamic model based safety analysis of a three-phase catalytic slurry intensified continuous reactor

Safety analysis like the HAZOP (HAZard OPerability) study can be much more efficient if a dynamic model of the system under consideration is available to evaluate the consequences of hazard deviations and the efficiency of the proposed safety barriers. In this paper, a dynamic model of a three-phase catalytic slurry intensified continuous chemical reactor is used within the context of its HAZOP (HAZard OPerability) study. This reactor, the RAPTOR®, is an intensified continuous mini-reactor designed by the French company AETGROUP SAS that can replace batch or fed-batch processes in the case of highly exothermic reactions involving hazardous substances. The highly hazardous hydrogenation of o-cresol under high pressure and temperature is taken as an example of application. Deviations as a temperature increase of the cooling medium or no cooling medium flow can produce an overheating of the reactor. Thus, three possible safety barriers are evaluated by simulation: shut off the gaseous reactant feed, shut off the liquid reactant feed or stop the agitation. The more efficient actions are the stopping of the agitation and/or of the gas reactant feed. The simulation results can efficiently help the reactor design and optimisation. Safety analysis can also be one of the criteria to compare batch and intensified continuous processes.     

Analysis of aerosol particles and coarse particulate matter concentrations in Chillán, Chile, 2001-2003

Daily particle samples were collected in Chillán, Chile, at six urban locations from September 1, 2001, through September 30, 2003. Aerosol samples were collected using monitors equipped with a Sierra Andersen 246-b cyclone inlet on Teflon filters. Average concentrations of coarse particulate matter (PM10) for the 2001-2003 period ranged from 43.4 microg/m3 to 81.8 microg/m3 across the six sites. Annual PM10 concentration levels exceeded the European Union concentration limits. Mean PM10 levels during the cold season (April through September) were more than twice as high as those observed in the warm season (October through March). Average contributions to PM10 from organic matter, soil dust, nitrate (NO3-), elemental carbon, ammonium (NH4+), and sulfate (SO4(2-)) were 31%, 27%, 11%, 8%, 7%, and 5%, respectively. The chemical analyses indicated that carbonaceous substances were the most abundant components of PM10 in cold months, whereas crustal material was the most abundant component of PM10 during warm months. Higher concentration levels were observed in the downtown area suggesting a clear anthropogenic origin, whereas in the rural sites the source was mainly natural, such as resuspended soil dust associated with traffic on unpaved roads and agricultural activities.     

Effect of Ca2+-ions on the absorption of Pb2+, Cu2+, Cd2+ and Zn2+ by humic substances

Distribution coefficients for the sorption of Pb²⁺, Cu²⁺, Cd²⁺ and Zn²⁺ by peat were determined as a function of the Ca²⁺-content of peat as well as of the Ca²⁺-concentration in the solution. The amount of heavy metal ions taken up was measured for Cu²⁺, Cd²⁺ and Zn²⁺ by atomic absorption spectrometry and for Pb²⁺ by using Pb-212 as a radioactive tracer.The results show that the distribution coefficients of the heavy metal ions increase, if one increases the initial ratio of the $\text{Ca}{}^{\mathrm{2+}}\text{H}{}^{\mathrm{+}}\text{-}\text{ions}$ in the peat phase. The distribution coefficients for the heavy metal ions decrease, however, if - at constant initial Ca²⁺-content of the peat - the Ca²⁺-concentration of the solution is increased.     

Methodologies for estimating disaggregated anthropogenic emissions--application to a coastal Mediterranean region of Spain

Regional estimates of both anthropogenic and biogenic emissions are important inputs for models of atmospheric chemistry. A disaggregated emissions inventory of all relevant pollutants for an area of 100 x 100 km2 centered in Burriana (Castellon, Spain) has been worked out. Time and spatial resolutions were hourly and 1 x 1 km2, respectively. Estimates were made for all relevant sources of anthropogenic emissions. The pollutants considered were SO2, NOx, NMVOCs (nonmethane volatile organic compounds), CH4, CO, CO2, N2O, and NH3. Thus, the emissions inventory includes up to 18 different NMVOCs. Emissions were computed for a typical sunny workday in June when strong photochemical activity could be expected. A "top-down" methodology was applied, taking as a starting point official annual and provincial estimates based on CORINAIR emission factors. This procedure is a very useful tool, particularly for those cases where a lack of sufficient local detailed information about the main emission-generating activities, such as road traffic, makes the use of a "bottom-up" approximation inadvisable. Moreover, updating these emission inventories is easier and they could be used to evaluate the impact of possible abatement strategies.     

Use of pharmaceuticals and pesticides to constrain nutrient sources in coastal groundwater of northwestern Long Island, New York, USA

In developed, non-agricultural, unsewered areas, septic systems and fertilizer application to lawns and gardens represent two major sources of nitrogen to coastal groundwater, in addition to atmospheric input. This study was designed to distinguish between these two possible nitrogen sources by analyzing groundwater samples for pharmaceutical residuals, because fertilizers do not contain any of these pharmaceuticals, but domestic wastewater commonly does. In addition, several herbicides and insecticides used in lawn treatment were analyzed as indicators of nitrogen delivery to groundwater from fertilizers. Groundwater samples were taken through piezometres at shoreline sites in unsewered areas surrounding Northport Harbor and in sewered areas adjacent to Manhasset Bay (hereafter referred to as "Northport" and "Manhasset", respectively), both in northwestern Long Island, USA. Excessive nitrogen loading has led to reduced dissolved oxygen concentrations in Long Island Sound, and the groundwater contribution to the nitrogen budget is poorly constrained. The frequent detection of the anticonvulsant compound carbamazepine in groundwater samples of the Northport Harbor area (unsewered), together with the fact that few pesticides associated with lawn applications were detected, suggests that wastewater input and atmospheric input are the likely sources of nitrogen in the Northport groundwater. High concentrations of nitrogen were also detected in the Manhasset (sewered) groundwater. The low detection frequency and concentration of carbamazepine, however, suggest that the sewer system effectively intercepts nitrogen from wastewater there. The likely sources of nitrogen in the Manhasset groundwater are atmospheric deposition and lawn fertilizers, as this area is densely populated.     

Environmental education research notes (USA)

Conclusion Selections reported above were chosen as representative and reflective of the varieties of environmental education research currently reported in the literature. They were picked for this paper somewhat arbitrarily, from among more than 70 surviving an initial screening. No selection bias was intended, other than for the purpose of providing a representative variety. In most cases, abstracts printed in theCurrent Index to Journals in Education, Resources in Education, orDissertation Abstracts International were used in preparing these notes.These notes have been compiled by John F. Disinger, Professor of Environmental Education, School of Natural Resources, The Ohio State University, Columbus, Ohio 43210, USA; he is also Associate Director, Education Resources Information Centre (ERIC) Clearinghouse for Science, Mathematics, and Environmental Education (SMEAC). This contribution by Professor Disinger is in response to the editorial, Invitation to Promote Research Cooperation (The Environmentalist, 1 (3) 177–178.