Formulation and Characterization of Sodium Alginate g-Hydroxy Ethylacrylate Bio-Degradable Polymeric Beads: In Vitro Release Studies

Novel type of highly swollen beads were prepared by grafting 2-hydroxyethylacrylate onto biodegradable Sodium alginate (SA) via free-radical polymerization using potassium persulphate as an initiator and Triprolidine hydrochloride as a model drug. Evidence of grafting was obtained by fourier transform infrared spectroscopic technique. Morphological properties of the beads were studied by SEM analysis. Thermal properties and crystallinity of the beads were characterized using differential scanning calorimetry and thermogravimetric analysis and X-ray diffraction techniques, respectively. Dissolution experiments were performed to study the release profiles at 37?°C in phosphate buffer solution (pH-7.4). Effect of monomer content, crosslinking agent and drug/polymer ratio on swelling properties and release profiles were also comparatively studied. A dissolution result concludes that drug release decreases with increasing crosslinker content. The highest release (96%) was obtained for the beads prepared with 0.5?mL crosslinking agent. Equilibrium swelling degree also supports the drug release profiles confirming SA-g-HEA beads showed better release profiles compare to plain SA beads.     

Miscibility Studies of Polysaccharide Xanthan Gum/PVP Blend

Miscibility characteristics of Xanthan gum and Poly (vinyl pyrrolidone) (PVP) in common solvent water were studied by viscometry, ultrasonic velocity and density techniques at 30 and 50 °C. Blend films of Xanthan gum/PVP were prepared by solution casting method and characterized by scanning electron microscopic (SEM) and differential scanning calorimeter (DSC) techniques. Using the viscosity data, interaction parameters of Chee’s (μ) and Sun’s (α) were computed to determine their miscibility. The values obtained revealed that blends were miscible when PVP content is up to 70% in blend at 30 °C. Xanthan gum/poly (vinyl pyrrolidone) blends showed miscibility in all composition at 50 °C. The results were then confirmed by ultrasonic velocity, density, and DSC techniques. Compatibility in the above compositions may be due to the formation of hydrogen bonding between the carbonyl group in PVP and hydroxyl group in Xanthan gum. Further, the results revealed that change in temperature had significant effect on the miscibility of Xanthan gum/Poly (vinyl pyrrolidone) blends.     

Soil Bioengineering Application and Practices in Nepal

The small mountainous country Nepal is situated in the central part of the Himalayas. Its climate varies from tropical in the south to arctic in the north; and natural vegetation follows the pattern of climate and altitude. Water-induced disaster problems including soil erosion, debris flow, landslides and flooding are common due to the unstable landscape. Soil erosion is the most important driving force for the degradation of upland and mountain ecosystems. Soil bioengineering has been used in Nepal for nearly 30 years to deal with erosion problems on slopes, in high way construction and riverbank stabilization. The main soil bioengineering techniques used in Nepal are brush layering, palisades, live check dams, fascines and vegetative stone pitching. This study is based on the geology, climate and vegetation of Nepal and briefly summarizes the application of soil bioengineering on slopes and stream banks, with especial attention to the role of vegetation on slope and stream bank stabilization. Furthermore, this paper addresses the role of community participation and responsibility for successful application of vegetation-based techniques in management, maintenance and utility aspects for the future. In recent years, soil bioengineering techniques are extensively used due to their cost-effectiveness, using locally available materials and low-cost labour in comparison to more elaborate civil engineering works. However, scientific implementation and record-keeping and evaluation of the work are indeed essential.     

Moisture Sorption Characteristics of Microbially Produced Polysaccharide and Polyvinyl Alcohol Blends

Moisture sorption characteristics of microbial polysaccharide (Ps.C101) from Pseudomonas caryophilli and polyvinyl alcohol (PVA) blends have been carried out at 27°C for water activity from 0.1 to 0.9. The sorption data was used to fit six different sorption isotherm models proposed in literature. The model constants were determined by linear fitting of the sorption equations. The ranges of applicability of water activity for isotherm models reported in this paper lie in between 0.1 and 0.4 for Brunaur–Emmet–Teller (BET) model (monolayer), and in between 0.2 and 0.9 for other models. The value of the coefficient of determination (R² = 0.97 ± 0.02) confirms the applicability of the equations studied.     

VALUE OF WATER IN IRRIGATED CROP PRODUCTION USING DERIVED DEMAND FUNCTIONS: A CASE STUDY OF SOUTH SASKATCHEWAN RIVER IRRIGATION DISTRICT1

ABSTRACT: Water abundance has led most North American societies to use water freely without priorizing its use. As water scarcity becomes reality in the southern part of Saskatchewan, planners and managers of water require information about the value of water in irrigation, as well as in alternative uses. In this study, the value of water to the producer in irrigation is developed both for the short and long run. The basis of this imputation is a derived demand function for water using linear programming. Water demand was bound to be inelastic at lower prices, and highly elastic at higher prices. The short-run value of water varied between $0.44 and $127.82 (1986 dollars) per acre-foot for different levels of product prices. However, the long-run value was estimated between zero and $1.59 per acre-foot of water.     

Recreation and Radial Growth of Pine Forests of the Natural Monument “Lake Turgoyak”, Southern Urals

Russian Journal of Ecology - The study presents results of the influence of recreational impact on the radial growth of Scots pine (Pinus sylvestris L.) in old-growth stands at the sites with the V...     

Influence of human-induced disturbance on benthic microbial metabolism in the Pichavaram mangroves,Vellar–Coleroon estuarine complex,India

Large areas of mangroves in India are heavily disturbed by cattle grazing, hypersalinity, and other human-induced impacts. In two disturbed Avicennia marina forests and two undisturbed A. marina and Rhizophora apiculata forests in the Pichavaram mangroves of the Vellar–Coleroon estuarine complex, southeast India, we measured the rates and pathways of microbial decomposition of soil organic matter to determine if human impact is altering biogeochemical activity within these stands. Rates of total carbon oxidation (T_COX) were higher in the undisturbed A. marina forest (mean 199 mol C m^–2 year^–1) than in the two impacted stands (43 and 79 mol C m^–2 year^–1); rates of total carbon oxidation in the R. apiculata forest averaged 75 mol C m^–2 year^–1. Sulphate reduction (range 21–319 mmol S m^–2 day^–1) was the major decomposition pathway (65–85% of T_COX), except at the most disturbed forest (30% of T_COX). Rates of sulphate reduction at all sites peaked in sub-surface soils to a depth of about 1 m, leading to little carbon burial (3–5% of total C input). There was some evidence of measurable iron and manganese reduction in association with tree roots. Rates of microbial activity were rapid in comparison with rates measured in other mangrove soils, reflecting high rates of phytoplankton production and organic matter retention in this lagoon. Human-induced disturbance creates a sharp zonation of dry, hypersaline soil overlying less saline, wetter soil, suppressing surface microbial and root growth. We conclude that this vertical alteration of soil characteristics and biogeochemistry shifts the cycling of nutrients between trees and microbes to a disequilibrium state, partly explaining why mangroves are stunted in these declining forests.Communicated by G. F. Humphrey, Sydney     

Removal of toxic metals from solution by leaf, stem and root phytomass of Quercus ilex L. (holly oak)

Increased consciousness for safeguarding the aqueous environment has prompted a search for alternative technologies for the removal of toxic metal ions from aqueous solutions. In this regard, a wide variety of biomass is being considered as adsorbents of heavy metals for treatment of industrial and domestic wastewaters as well as natural waters, including drinking water. In the present investigation, the potential of Quercus ilex phytomass from stem, leaf and root as an adsorbent of chromium (Cr), nickel (Ni), copper (Cu), cadmium (Cd) and lead (Pb) at ambient temperature was investigated. The metal uptake capacity of the root for different metals was found to be in the order: Ni>Cd>Pb>Cu>Cr; stem Ni>Pb>Cu>Cd>Cr; and leaf Ni>Cd>Cu>Pb>Cr. The highest amount adsorbed was Ni (root>leaf>stem). Data from this laboratory demonstrated that Ni is sequestered mostly in the roots, where concentrations can be as high as 428.4 ng/g dry wt., when 1-year-old seedlings were treated with Ni (2000 mg/l) in pot culture experiments, compared to 7.63 ng/g dry wt., control (garden and greenhouse soil) topsoil where Ni was present in trace amounts. This proves that the root biomass of Q. ilex has the capacity for complexing Ni. Cr exhibited the least adsorption values for all the three types of phytomass compared to other metals. The trend of adsorption of the phytomass was similar for Ni and Cd, i.e. root>leaf>stem. Desorption with 10 mM Na(4) EDTA was effective (55-90%) and, hence, there exists the possibility of recycling the phytomass. The biosorption results of recycled phytomass suggest that the selected adsorbents are re-usable. The advantages and potential of the Q. ilex phytomass as a biofilter of toxic trace metals, the scope and need for enhancing the efficiency of the Q. ilex phytomass as an adsorbent of metals are presented.