Investigation on Miscibility of Sodium Alginate/Pullulan Blends

Miscibility studies of Sodium alginate (NaAlg)/Pullulan have been carried out in different percentage of blend components. The ultrasonic velocity, viscosity, density and refractive index were measured at 30 and 40 °C. Further the blend films of NaAlg and Pullulan were prepared by solution casting method and characterized by differential scanning calorimetric (DSC), fourier transition infrared spectroscopic (FTIR), and scanning electron microscopic (SEM) methods. Using the viscosity data, interaction parameters were computed to determine the miscibility. The data suggest that the blend is miscible in the entire composition range. The change in temperature had no significant effect on the miscibility of NaAlg/Pullulan blends. The miscibility is confirmed by SEM, DSC, ultrasonic velocity, density, and refractive index methods. The specific interactions of hydrogen bonding type of the blends were investigated by FTIR.     

Chemometric evaluation of heavy metal pollutions in Patna region of the Ganges alluvial plain,India: implication for source apportionment and health risk assessment

While metal pollution and distribution in soil are well documented for many countries, the situation is more serious in developing countries because of the rapid increase in industrialization and urbanization during last decades. Although it is well documented in developed countries, data about substantial metal pollution in Indian soil, especially in eastern Ganges alluvial plain (GAP), are limited. In this study, eight different blocks of Patna district located in eastern GAP were selected to investigate the contamination, accumulation, and sources of metals in surface soil considering different land use types. Additionally, human health risk assessment was estimated to mark the potential carcinogenic and non-carcinogenic effect of metals in soil. The concentration of all metals (except Pb) in soil was below the Indian standard limit of the potential toxic element for agricultural soil. Pb was the most abundant in soil, followed by Zn and Cu, and accounted for 52, 33 and 8% of the total metal. In terms of land use types, roadside soil detected higher concentrations of all metals, followed by park/grassland soil. Principal component analysis results indicated traffic pollution and industrial emissions are the major sources of heavy metals in soil. This was further confirmed by strong inter-correlation of heavy metals (Cd, Cr, Ni, Cu and Pb). Human health risk assessment results indicated ingestion via soil as the primary pathway of heavy metal exposure to both adults and children population. The estimated hazard index was highest for Pb, suggesting significant non-carcinogenic effect to both adults and children population. The children were more prone to the non-carcinogenic effect of Pb than adults. However, relatively low cancer risk value estimated for all metals suggested non-significant carcinogenic risk in the soil.     

Effect of trichloroethylene (TCE) inhalation on biotransformation enzymes of rat lung and liver

Trichloroethylene (TCE) is widely used as an industrial solvent and cleaning fluid. In the present study the toxic effects of TCE inhalation on pulmonary and hepatic biotransformation enzymes in rats have been investigated by assay of aniline hydroxylase (AH), aminopyrine-N-demethylase (APD), benzo-a-pyrene hydroxylase (BH) and glutathione-s-transferase (GST) activities and glutathione (GSH) contents in liver as well as lungs of exposed animals. In both organs phase I and phase II drug metabolizing enzymes have been found to be increased along with decrease in GSH contents following TCE inhalation. Pulmonary as well as hepatic MFO's seem to be activated by inhaled TCE probably in an attempt for its rapid detoxification and reduced glutathione is used during its biotransformation.     

Regional inventory of soil surface nitrogen balances in Indian agriculture (2000-2001)

Nitrogen regulates several ecological and biogeochemical processes and excess reactive nitrogen in the environment can lead to pollution problems, including the deterioration of air quality, disruption of forest processes, acidification of lakes and streams, and degradation of coastal waters. Much of the excess nitrogen inputs are related to food and energy production. An important step to understanding the sources of nitrogen and ultimately defining solutions to excess nitrogen is to describe the geographic distribution of agricultural nitrogen contributions from different regions. In this study, soil surface nitrogen loads were quantified for different states of India for the period 2000-2001. Nearly 35.4 Tg of nitrogen has been estimated as inputs from different sources, with output nitrogen from harvested crops of about 21.20 Tg. The soil surface nitrogen balance, estimated as inputs minus outputs, is found to be about 14.4 Tg surplus from the agricultural land of India. Livestock manure constituted a major percentage of total inputs (44.06%), followed by inorganic fertilizer (32.48%), atmospheric deposition (11.86%) and nitrogen fixation (11.58%). Nitrogen balance varied from deficit to surplus for different states. The highest nitrogen surplus was found in Uttar Pradesh (2.50 Tg) followed by Madhya Pradesh (1.83 Tg), Andhra Pradesh (1.79 Tg), etc. A negative nitrogen balance was found in Orissa (-0.01 Tg), Andaman Nicobar Islands (-0.32 Tg) and for some of the northeastern states. Major fertilizer consumption states were found to be Tamilnadu (204 kg/ha), Haryana (132 kg/ha), Punjab (148 kg/ha), followed by others. Similarly, nitrogen inputs from total livestock excretions were found to be high for Kerala (616 kg/ha), Jammu and Kashmir (389 kg/ha), Tamil Nadu (338 kg/ha), etc. The average nitrogen surplus of about 54 kg/ha observed for the agricultural land of the entire country of India is comparatively higher than the average surplus of about 31 kg/ha reported for European countries. These results, obtained from nutrient mass balance calculations, will be useful to formulate nutrient management plans relating to fertilizer usage, livestock management and for adopting some best management strategies at a state level in India.     

Plant community tolerant to trace elements growing on the degraded soils of São Domingos mine in the south east of Portugal: environmental implications

The selection of trace element tolerant species is a key factor to the success of remediation of degraded mine soils. Mining activities generate a large amount of waste rocks and tailings, which get deposited at the surface. The degraded soils, the waste rocks and tailings are often very unstable and will become sources of pollution. The direct effects will be the loss of cultivated land, forest or grazing land, and the overall loss of production. The indirect effects will include air and water pollution and siltation of rivers. These will eventually lead to the loss of biodiversity, amenity and economic wealth. Restoration of a vegetation cover can fulfil the objectives of stabilization, pollution control, visual improvement and removal of threats to human beings. Thus, remediation of mine spoils/tailings and biogeochemical prospecting would rely on the appropriate selection of plant species. Plant community responds differently on their ability to uptake or exclude a variety of metals. In this work, plant species were sampled from all populations established in an abandoned copper mine of S?o Domingos, SE Portugal. Plants belonging to 24 species, 16 genera and 13 families were collected from the degraded copper mine of S?o Domingos. Plant samples were analysed for total Ag, As, Cu, Ni, Pb, and Zn. The highest concentrations of metals in soils dry matter were 11217.5 mg Pb kg(-1), 1829 mg Cu kg(-1), 1291 mg As kg(-1), 713.7 mg Zn kg(-1), 84.6 mg Cr kg(-1), 54.3 mg Co kg(-1), 52.9 mg Ni kg(-1) and 16.6 mg Ag kg(-1). With respect to plants, the higher concentrations of Pb and As were recorded in the semi-aquatic species Juncus conglomeratus with 84.8 and 23.5 mg kg(-1) dry weight (DW), Juncus efusus with 22.4 and 8.5 mg kg(-1) DW, and Scirpus holoschoenus with 51.7 and 8.0 mg kg(-1) DW, respectively. Thymus mastichina also showed high content of As in the aboveground parts, 13.6 mg kg(-1) DW. Overall, the results indicate accumulation of various metals by different plant species, with some of these metals being partitioned to the shoots. Environmental implications of these observations are discussed.     

Preliminary observations on the circulatory system in eggs and early larvae of some teleostean fishes

Observations on the pattern of blood circulation in eggs and early larvae of Ambassis, Mugil, Dorosoma and Thrissocles species have been made. In the initial stages, the tubular heart lies on the left side, near the cephalic region. The anterior end of the heart lies near the snout. The posterior end is attached to a point mid-way between the orbits and auditory vesicles; the position of the anterior end is greatly influenced by the size of yolk. Initially, the tubular heart and dorsal aorta lie in a line. As a result of yolk absorption, the anterior end of the tubular heart gradually sinks to a position posterior to the attached end. Liquified yolk is circulated through the heart in early stages; blood corpuscles become apparent only in larvae. The heart-beat, which is initially irregular, gradually becomes regular as development progresses. In the initial stages the blood flows to the caudal and not to the cephalic region. The blood vessels are narrow, and the oval-shaped blood corpuscles must therefore pass through individually, with their long axes parallel to the passage. A definite capillary system is not evident. The blood vessels can dilate and contract when required.     

Optimization of ambient Air Quality Monitoring Networks

A method has been developed to obtain a joint solution to the problem of optimum number and configuration of ambient air quality monitors, on the principles of spatial correlation analysis and the minimum spanning tree. The interest in this case is to represent the patterns of regional air quality, at a minimum of an overlap of information. This methodology is extended to account for the uncertainties in air quality simulations and also to incorporate the probabilities of occurrence. As an illustration to these methodologies, an example of Taipei City, Taiwan has been considered.     

Demographic antecedents and performance consequences of structural holes in work teams

This paper addresses two important questions concerning social fragmentation in work teams. First, from where do disconnections between team members, measured in terms of the proportion of structural holes within the work team, derive? Second, what are the consequences for team performance of having more or less structural holes between team members? In answering the first question, the research investigated whether demographic diversity in teams played a role in predicting the proportion of structural holes in team friendship networks. For 19 teams at a wood products company, there were no effects of ethnic and gender diversity on structural hole proportions. However, age diversity significantly reduced the extent of structural ‘holeyness.’ In investigating the second question, two countervailing tendencies were considered. In the absence of structural holes, teams are likely to be at low risk for new ideas. But fragmented teams in which team members are separated by many structural holes are likely to have difficulty coordinating. The researchers demonstrated a curvilinear effect: a moderate level of structural diversity in teams was positively associated with team performance. Thus, the research suggested that it is structural diversity (measured in terms of the proportion of structural holes) rather than demographic diversity that matters in the prediction of team performance. Copyright © 2006 John Wiley & Sons, Ltd.     

A short-cut method for assessing absorbents for post-combustion carbon dioxide capture

A short-cut method for the estimation of the minimum regeneration energy and optimum solvent flow rate in post-combustion carbon dioxide capture by absorption is presented. It is developed for comparing solvents of which only little thermo-physical data is known. The closed absorber–desorber cycle is described by an equilibrium stage model (modified Kremser equation with discretized equilibrium curves). The method can be implemented in any mathematical toolbox or as stand-alone solution. The only required input is the solubility data at absorber and desorber conditions, the heat of absorption and heat capacities. The caloric data may be estimated. The method was applied to monoethanolamine (MEA) and two solvents from the EU-project CASTOR. Comparisons with experimental results from pilot-plant studies with MEA show that the method, despite its simplicity, gives reasonable results. The method should also be useful in other applications where absorbents, of which only little data is available, need to be screened.     

Heavy metal contamination of drinking water in Kamrup district, Assam, India

This study was undertaken to assess the heavy metal concentration of the drinking water with respect to zinc, copper, cadmium, manganese, lead and arsenic in Kamrup district of Assam, India. Ground water samples were collected from tube wells, deep tube wells and ring wells covering all the major hydrogeological environs. Heavy metals in groundwater are estimated by using Atomic Absorption Spectrometer, Perkin Elmer Analyst 200. Data were assessed statistically to find the distribution pattern and other related information for each metal. The study revealed that a good number of the drinking water sources were contaminated with cadmium, manganese and lead. Arsenic concentrations although did not exceeded WHO limits but was found to be slightly elevated. Copper and zinc concentrations were found to be within the prescribed WHO limits. An attempt has also been made to ascertain the possible source of origin of the metals. Positive and significant correlation existing between manganese with zinc and copper indicates towards their similar source of origin and mobility. In view of the present study and the level of heavy metal contamination, it could be suggested to test the potability of the water sources before using it for drinking purpose.