Carbon Budget Implications of the Transition from Natural to Managed Disturbance Regimes in Forest Landscapes

Land-use change from an unmanaged to a managed forested landscape in northern forests is associated with a reduction of the area annually affected by natural disturbances (wildfires and forest insects) and the introduction of harvesting as a new disturbance. This study examined the impacts of changes in the disturbance regime-the frequency and type of disturbance-on landscape-level carbon (C) content and fluxes. The Carbon Budget Model of the Canadian Forest Sector was used to assess these impacts in six representative landscapes (100,000 ha each) with a range of disturbance regimes that are characteristic of conditions in coastal British Columbia, the interior of British Columbia, and the eastern boreal forest in Canada. The model was used to simulate ecosystem C fluxes during a period of natural disturbances, a 50-year transition period during which harvesting replaced natural disturbances, followed by 150 years of harvesting. The initial landscape-level biomass C content under natural disturbance regimes in the six example landscapes was 22 to 75% of their potential maximum content which is often used as the reference or baseline case. After 200 years of forest management, the C stored in the landscape plus the C retained in forest products manufactured from harvested biomass was between 58 and 101% of the landscape C content prior to the onset of harvesting. Landscape-level ecosystem C content was found to be affected by changes in the disturbance frequency, the age-dependence of the disturbance probabilities, and the disturbance-specific impacts on ecosystem C content. The results indicate that using the potential maximum C content of a landscape as the baseline always overestimates the actual C release due to land use change. A more meaningful procedure would be to assess the actual differences in landscape-level C content between the natural and the managed disturbance regime.     

重金属在牡蛎(Crassostrea virginica)中的生物积累及其影响因素的研究

牡蛎软体，贝壳和沉积物中Ｃｄ、Ｃｒ、Ｃｕ、Ｆｅ、Ｍｎ、Ｐｂ和Ｚｎ等重金属元素被同步分析研究，研究结果表明，重金属在牡蛎中的生物积累是牡自身的新陈代谢、重金属元素的地球化学性质和环境诸因素综合影响的结果，其中牡蛎斩生理作用对重金属在软体中的积累产生的影响尤为重要，而贝壳中重金属的积累对来自环境的影响更为敏感。     

Greenhouse Gas Inventory for Land Use Change and Forestry in Finland Based on International Guidelines

Mitigation and Adaptation Strategies for Global Change - Guidelines of the Intergovernmental Panel on Climate Change (IPCC) were used to assess a greenhouse gas inventory for land use change and...     

Utilisation of bubble resonance phenomena to improve gas–liquid contact

 In several branches of science and technology a gaseous phase is dispersed into a liquid in the form of bubbles, a gaseous component then dissolves into the liquid and subsequently undergoes chemical reaction. The overall process performance can be improved substantially when the area of gas–liquid contact is increased. By subjecting the liquid phase to low frequency vibrations, the bubbles are shown to suffer significant breakage, induced by resonance. When the vibration is properly tuned, the interfacial area is found to increase by a factor of 1.8–2.4, depending on the properties of the liquid. Resonance-induced bubble breakage phenomena have a great potential for improving the rates of chemical processes involving fast reactions, with minimal energy input. Received: 7 July 2000 / Accepted in revised form: 28 August 2000     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.