Identification of a novel PCB source through analysis of 209 PCB congeners by US EPA modified method 1668

PCDD/Fs and PCBs in surface waters and effluent waste streams flowing into New York/New Jersey Harbor were sampled by large volume filtration and solid phase extraction (XAD-2). Passive hexane samplers were employed in sewer trackdown. Extraction media were analyzed for 2,3,7,8 substituted PCDD/Fs and all 209 PCB congeners. The non-Aroclor PCB congener, 3,3^′-DiCB, was ubiquitous in the harbor and was found to be associated with pigment manufacture. Knowledge of inadvertent synthesis of non-Aroclor PCBs is not new but its magnitude and the generation of congeners with dioxin-like properties from this process is novel.     

Plant winners and losers during grassland N-eutrophication differ in biomass allocation and mycorrhizas

Human activities release tremendous amounts of nitrogenous compounds into the atmosphere. Wet and dry deposition distributes this airborne nitrogen (N) on otherwise pristine ecosystems. This eutrophication process significantly alters the species composition of native grasslands; generally a few nitrophilic plant species become dominant while many other species disappear. The functional equilibrium model predicts that, compared to species that decline in response to N enrichment, nitrophilic grass species should respond to N enrichment with greater biomass allocation aboveground and reduced allocation to roots and mycorrhizas. The mycorrhizal feedback hypothesis states that the composition of mycorrhizal fungal communities may influence the composition of plant communities, and it predicts that N enrichment may generate reciprocal shifts in the species composition of mycorrhizal fungi and plants. We tested these hypotheses with experiments that compared biomass allocation and mycorrhizal function of four grass ecotypes (three species), two that gained and two that lost biomass and cover in response to long-term N enrichment experiments at Cedar Creek and Konza Long-Term Ecological Research grasslands. Local grass ecotypes were grown in soil from their respective sites and inoculated with whole-soil inoculum collected from either fertilized (FERT) or unfertilized (UNFERT) plots. Our results strongly support the functional equilibrium model. In both grassland systems the nitrophilic grass species grew taller, allocated more biomass to shoots than to roots, and formed fewer mycorrhizas compared to the grass species that it replaced. Our results did not fully support the hypothesis that N-induced changes in the mycorrhizal fungal community were drivers of the plant community shifts that accompany N eutrophication. The FERT and UNFERT soil inoculum influenced the growth of the grasses differently, but this varied with site and grass ecotype in both expected and unexpected ways suggesting that ambient soil fertility or other factors may be interacting with mycorrhizal feedbacks.     

Prenatal diagnosis of multiple acyl-CoA dehydrogenase deficiency: association with elevated α-fetoprotein and cystic renal changes

We report the occurrence of multiple acyl-CoA dehydrogenase deficiency (MADD) in two consecutive pregnancies in a young, Caucasian, non-consanguineous couple. In the first pregnancy, the maternal serum α-fetoprotein was elevated. A sonogram showed growth delay, cystic renal disease, and oligohydramnios; the parents decided to terminate the pregnancy. Postmortem examination confirmed the cystic renal disease and showed hepatic steatosis, raising the suspicion of a metabolic disorder. The diagnosis of MADD was made by immunoblot studies on cultured fibroblasts. In the subsequent pregnancy, a sonogram at 15 weeks' gestation showed an early growth delay but normal kidneys. The maternal serum and amniotic fluid concentrations of α-fetoprotein were elevated, and the amniotic fluid acylcarnitine profile was consistent with MADD. In vitro metabolic studies on cultured amniocytes confirmed the diagnosis. A follow-up sonogram showed cystic renal changes. These cases provide additional information regarding the evolution of renal changes in affected fetuses and show a relationship with elevated α-fetoprotein, which may be useful in counseling the couple at risk. MADD should be considered in the differential diagnosis of elevated α-fetoprotein and cystic renal disease. Early growth delay may be an additional feature. Copyright © 2001 John Wiley & Sons, Ltd.     

Mercury Mass Balances: A Case Study of Two North Dakota Power Plants

ABSTRACT

The Energy & Environmental Research Center (EERC) conducted a mercury-sampling program to provide data on the quantity and forms of Hg emitted and on the Hg removal efficiency of the existing air pollution control devices at two North Dakota power plants—Milton R. Young Station and Coal Creek Station. Minnkota Power Cooperative, Great River Energy, the North Dakota Industrial Commission, and EPRI funded the project. The primary objective was to obtain accurate measurements of Hg released from each plant, as verified by a material balance. A secondary objective was to evaluate the ability of a mercury continuous emission monitor (CEM) to measure total Hg at the stack.

At both plants, speciated Hg measurements were made at the inlets and outlets of both the electrostatic precipi-tators (ESPs) and the flue gas desulfurization (FGD) systems. A Semtech Hg 2000 (Semtech Metallurgy AB) mercury CEM was used to measure the total Hg emissions at the stack in real time. Using these measurements and plant data, the measured Hg concentrations in the coal, FGD slurries, and ESP ash, a Hg mass flow rate was calculated at each sampling location. Excellent Hg mass balances were obtained (±15%). It was also found that the Hg was mostly in the elemental phase (~90%), and the small amount of oxidized Hg that was generated was removed by the FGD systems.

Insignificant amounts of particulate-bound Hg were measured at both plants. However, 10-20% of the elemental Hg measured prior to the ESP was converted to oxidized Hg across the ESP. The data show that, at these facilities, almost all of the Hg generated is being emitted into the atmosphere as elemental Hg. Local or regional deposition of the Hg emitted from these plants is not a concern. However, the Hg does become part of the global Hg burden in the atmosphere. Also, the evidence appears to indicate that elemental Hg is more difficult to remove from flue gas than oxidized Hg is.     

Assessment of Economic and Water Quality Impacts of Land Use Change Using a Simple Bioeconomic Model

The objective of this study is to assess the economic and water quality impact of land use change in a small watershed in the Wiregrass region of Alabama. The study compares changes in water quality and revenue from agricultural and timber production due to changes in land use between years 1992 and 2001. The study was completed in two stages. In the first stage, a biophysical model was used to estimate the effect of land use change on nitrogen and phosphorus runoff and sediment deposition in the main channel; in the second stage, farm enterprise budgeting tools were used to estimate the economic returns for the changes in land use condition. Both biophysical and economic results are discussed, and a case for complex optimization to develop a decision support system is presented.     

Derivation of motor vehicle tailpipe particle emission factors suitable for modelling urban fleet emissions and air quality assessments

Background, aim and scope  

Urban motor vehicle fleets are a major source of particulate matter pollution, especially of ultrafine particles (diameters < 0.1 μm), and exposure to particulate matter has known serious health effects. A considerable body of literature is available on vehicle particle emission factors derived using a wide range of different measurement methods for different particle sizes, conducted in different parts of the world. Therefore, the choice as to which are the most suitable particle emission factors to use in transport modelling and health impact assessments presented as a very difficult task. The aim of this study was to derive a comprehensive set of tailpipe particle emission factors for different vehicle and road type combinations, covering the full size range of particles emitted, which are suitable for modelling urban fleet emissions.     

Carbon Monoxide and Sulfur Dioxide Adsorption on— and Desorption from Glass,Plastic, and Metal Tubings

It was planned to install 305 m (1000 ft) of tubing on a television tower to transport ambient air samples from different height levels to pollutant monitoring instruments at ground level. A feasibility study was undertaken to determine the sorption characteristics of sulfur dioxide and carbon monoxide on various conduit materials. Sorption studies were completed on 30.5 m (100 ft) lengths of 1.3 cm (Y2 in) diam tubings of glass, Teflon, tygon, polypropylene, PVC piping, aluminum, and stainless steel. Final tests were completed on 305 m of 1.9 cm (3/4 in) diam stainless steel tubing. The following variables were investigated: tubing diameter, gas concentration, flowrate through the tubing, temperature, humidity, and the effect of sorption with sulfur dioxide and carbon monoxide alone or together. The parameter ranges studied approximated either atmospheric or air sampling conditions. For carbon monoxide, there was no significant difference between the mean inlet and outlet tubing concentrations under the conditions of the study. With sulfur dioxide, there was neither tubing adsorption nor desorption under the experimental parameters studied, except for tygon, PVC, and aluminum. After a conditioning period with sulfur dioxide, tygon, PVC, and aluminum could also be used as air inlet conduits; tygon is not recommended.     

Determination of In Situ Esterification Parameters of Citric Acid-Glycerol Based Polymers for Wood Impregnation

The development of wood treatments is of increasing industrial importance. A novel technique for improving the properties of lodgepole pine and white pine through modification of the microstructure is described. The present investigation is devoted to the synthesis and determination of in situ parameters of citric acid and glycerol based polymers for wood impregnation. This solvent free approach is environmentally friendly and achieved through an esterification condensation reaction under acidic conditions. Crude glycerol and citric acid reactants were cross-linked via a curing process at 160?°C creating a polymer with only water as the byproduct. The ester bonds and crosslinking levels were controlled using different catalysts and citric acid contents and related to the reaction time and temperature. The nature of bonding within the polymers and at the wood cell walls was determined by FT-IR analysis. The thermal properties such as glass transition temperature (T_g) were studied using TGA/DSC and the effect of citric acid content and catalyst type determined. Dimensional stability of impregnated wood samples improved above 50% for each sample with HCl and p-TSA catalysts compared to control samples. FTIR spectra were studied to show the presence of the ester linkages of the polymer in situ at the wood cell walls. Bonding between the polymer and wood macromolecules were observed by scanning electron microscopy and interpreted as evidence of chemical bonds at the wood cells. When prepared using a catalyst, the polymer was intimately incorporated into wood structure significantly improving the substrate dimensional stability. Enhanced stability makes this approach of particular interest for exterior wood products especially as a green renewable option for the wood industry.