Seasonal variations in sugar contents and microbial community in a ryegrass soil

The relationship among sugar concentrations, microbial community and physical variables (precipitation and soil temperature) was investigated in a ryegrass soil from January 2004 to January 2005. Mono- and disaccharide sugars were extracted using a mixture of dichloromethane and methanol and analyzed as their TMS derivatives by GC-MS. Changes in microbial community were assessed using phospholipid and neutral lipid fatty acids (PLFA and NLFA, respectively) analysis. The results of a one-year study showed that the seasonal variability of sugar contents found in the soil samples is mainly related to biomass or nutritional status of the fungal community. The increase in sucrose and fructose exudation by plant roots in the beginning of the growing season (early spring) may be responsible for the highest fungal biomass amount (PLFAs) observed in this study. Fungal storage lipid abundances (NLFAs) peaked in summer, during the same period that the highest concentrations of mannitol and trehalose were detected. This is consistent with these two sugars being stress-induced fungal metabolites, produced due to the low soil moisture observed during this season. In contrast, bacterial community growth seems to be more dependent on plant substrate than on physical variables, since the strongest decrease in bacterial biomass amounts (PLFAs) was found after cutting of the ryegrass field in early July.     

Long-term neurodevelopmental and cardiovascular outcome after intrauterine transfusions for fetal anaemia: a review

Perinatal survival rates after intrauterine transfusions (IUT) for red cell alloimmunisation now exceed 90%, which demonstrates the safety and efficacy of one of the most successful procedures in fetal therapy. However, improved perinatal survival could lead to an increased number of children with long-term disabilities. The importance of long-term follow-up studies in fetal therapy lies in both the necessity of evaluation of antenatal management as well as in evidence-based preconceptional and prenatal counselling. This review describes the possible long-term cardiovascular and neurodevelopmental sequelae after IUT treatment for different indications including red cell alloimmunisation, parvovirus B19 infection, fetomaternal haemorrhage and twin anaemia-polycythaemia sequence. © 2013 John Wiley & Sons, Ltd.     

The voluntary approach to externality problems: A survey of the critics

The literature critical of the Coase Theorem is synthesized. One conclusion is that bilateral bargaining in a voluntary, frictionless setting results in optimality only by accident, if at all. This is because of the problem of threats and the problem of small numbers bargaining behavior (it is not marginal). The second conclusion is that the placement of liability in general affects the allocation of resources. The exception is when there are no income effects, no transactions costs, and no nonseparabilities. But the existence of externalities implies transaction costs are high, which in turn implies that liability matters.     

Method for the determination of sub-ppm concentrations of perfluoroalkylsulfonate anions in water

The determination of sub-ppm concentrations of aqueous perfluoroalkylsulfonate (PFSt) anions, including perfluorooctylsulfonate (PFOS), has been accomplished with a relatively simple mass spectrometric procedure that does not require extraction of the analytes into an organic solvent or a chromatographic separation prior to injection into the negative-ion electrospray ionization mass spectrometer. Sample pretreatment was minimized and consisted of dilution of the aqueous samples of groundwater, surface water, tap water, and distilled water with acetonitrile, addition of dodecylsulfate (DDS) as an internal standard, and, in some cases, addition of known amounts of perfluorobutylsulfonate (PFBS) or PFOS for standard-addition experiments. The linear-response range for PFOS is 25.0 microg L(-1) to 2.5 mg L(-1). The lower limit of this range is three orders of magnitude lower than an equally straightforward chromatographic method. The relative errors for standard aqueous solutions containing only 25.0 microg L(-1) and 2.5 mg L(-1) PFOS are +/- 14% and +/- 7%, respectively, with 133 microg L(-1) DDS as the internal standard. The detection limit and quantification limit for PFOS in these standards are 5.0 microg L(-1) and 25.0 microg L(-1), respectively. Six different PFS anions, containing three to eight carbon atoms, were identified and quantified in an aqueous film-forming foam (AFFF) formulation using the method of standard additions. Two alkylsulfate anions and two perfluoroalkylcarboxylate anions were also identified in the AFFF formulation.     

Chemical and physical properties of dry flue gas desulfurization products

Beneficial and environmentally safe recycling of flue gas desulfurization (FGD) products requires detailed knowledge of their chemical and physical properties. We analyzed 59 dry FGD samples collected from 13 locations representing four major FGD scrubbing technologies. The chemistry of all samples was dominated by Ca, S, Al, Fe, and Si and strong preferential partitioning into the acid insoluble residue (i.e., coal ash residue) was observed for Al, Ba, Be, Cr, Fe, Li, K, Pb, Si, and V. Sulfur, Ca, and Mg occurred primarily in water- or acid-soluble forms associated with the sorbents or scrubber reaction products. Deionized water leachates (American Society for Testing and Materials [ASTM] method) and dilute acetic acid leachates (toxicity characteristic leaching procedure [TCLP] method) had mean pH values of >11.2 and high mean concentrations of S primarily as SO(2-)4 and Ca. Concentrations of Ag, As, Ba, Cd, Cr, Hg, Pb, and Se (except for ASTM Se in two samples) were below drinking water standards in both ASTM and TCLP leachates. Total toxicity equivalents (TEQ) of dioxins, for two FGD products used for mine reclamation, were 0.48 and 0.53 ng kg(-1). This was similar to the background level of the mine spoil (0.57 ng kg(-1)). The FGD materials were mostly uniform in particle size. Specific surface area (m2 g(-1)) was related to particle size and varied from 1.3 for bed ash to 9.5 for spray dryer material. Many of the chemical and physical properties of these FGD samples were associated with the quality of the coal rather than the combustion and SO2 scrubbing processes used.     

IMPACT OF COAL SURFACE MINING AND RECLAMATION ON SURFACE WATER CHEMICAL CONCENTRATIONS AND LOAD RATES IN THREE OHIO WATERSHEDS1

ABSTRACT: Information is lacking on the watershed scale effects of mining and reclaiming originally undisturbed watersheds for coal on surface water chemical concentrations and load rates for a variety of constituents. These effects were evaluated on three small, geologically dissimilar watersheds subjected to surface mining in Ohio. Comparisons were made between phases of land disturbances using ratios of average concentrations and load rates: Phase 1 (natural), subphases of Phase 2 (mining and reclamation), and subphases of Phase 3 (partial reclamation and final condition) using 4,485 laboratory analyses of 34 constituents. Average concentration and load rate ratios were categorized into three classes—minor, moderate, and substantial. Mining and reclamation (M/R) affected flow duration curves in different ways‐baseflow changes were variable, but high flows generally increased. The average concentration ratios for all sites were classified as 15 percent “minor,” 36 percent “moderate,” and 49 percent “substantial” (average ratio of 2.4.) Generally load rate ratios increased due to mining and reclamation activities (average ratio of 3.3). Minor, moderate, and substantial impacts were found on average for 7 percent, 23 percent, and 70 percent, respectively, of load rate ratios. The impact of M/R on average load rates was not necessarily the same as on average concentrations due to changed hydrology and can be opposite in effect. The evaluation of the impacts of M/R requires knowledge of changing hydrologic conditions and changing supplies and rates of release of chemicals into streams. Median sediment concentration ratio is an indicator of average constituent load rate ratio of a wide variety of chemical constituents and is useful for development of best management practices to reduce chemical loads. The site at which diversion ditches were not removed during final reclamation sustained large chemical load rates, and removal of diversions at the other mined site reduced load rates. Revegetation of poorly reclaimed areas decreased chemical load rates. Chemical load rates were sensitive to geology, mining, and reclamation methods, diversions, and changing hydrology, concentration flow rate regressions, and watershed areas.     

A Systemic Approach to Scoping of Factors Influencing More Sustainable Land Use in Herefordshire

Defining and putting into practice sustainable land use is a complex, systemic problem. Systems models and techniques were used in a study of Herefordshire to clarify the situation and identify the potential for a more locally focused, learning-based approach to land use. Issues included: (i) uncertainty about the boundary of a 'system of sustainable Herefordshire land use'; (ii) the complexity of economic flows in the county and the absence of some critical data; (iii) the importance of the Herefordshire landscape to tourism and the role of agriculture as a determinant of the state of that landscape; (iv) weakness of the institutional linkage between tourism and agriculture; (v) the current lack of inclusion of many relevant stakeholders in concerted action. Factors favouring a learning approach included a strong local identity, local food-related developments, and educational initiatives. Barriers to such an approach included questions of power and landholding, government policies, and attitudes and skills within organizations. These findings are considered in relation to the wider debate over approaches to sustainability.     

Airborne exposure to wheat allergens: optimised elution for airborne dust samples

Well-validated methods for measuring airborne occupational allergens are essential for effective control and reduction of allergen exposures. For wheat flour allergens, specific immunoassays are available, but there is a need for optimisation and standardization of sample processing procedures. Wheat flour allergen elution and storage were studied using airborne dust samples collected in bakeries with a new parallel sampler. Forty-eight series of 9 parallel filters were subjected to extraction procedures varying in elution medium, shaking method, extraction vial, and centrifugation speed. Wheat allergens were measured with enzyme immunoassays, and the effect of various procedures evaluated by mixed regression analyses. The stability of the eluted allergens was assessed after storage for 20 days and 4 months at -20 degrees C, in the presence or absence of casein in the medium. Only the type of elution medium had significant effects on allergen recovery: addition of Tween-20 resulted in 3- to 100-fold increased levels, an effect that was most pronounced at low concentrations. Allergen levels in extracts were stable for at least 4 months at -20 degrees C, irrespective of the presence of casein in the medium. Addition of Tween-20 to the elution medium is essential for optimal extraction of wheat allergen. The recommended procedure further includes the use of conventional polystyrene tubes, simple shaking methods, and centrifugation after extraction. Wheat dust extracts in PBS-Tween can be stored frozen for at least 4 months, and addition of a stabilising protein is not required.