Mesozooplankton community structure in offshore and coastal waters of the Ionian Sea (eastern Mediterranean) during mixed and stratified conditions

Depth-stratified samples, collected during a period where the water column was vertically mixed (March 2000) and a period of thermal stratification (September 2000), were analyzed in order to investigate the horizontal and vertical distribution patterns and composition of mesozooplankton, especially copepod species assemblages, in a pelagic (Ionian Sea) and a coastal area (Patraikos Gulf) of the eastern Mediterranean. Total mesozooplankton abundance and biomass were significantly lower in the highly oligotrophic offshore waters of the Ionian Sea when compared to the semi-enclosed Patraikos Gulf during both seasons. Small-sized copepods dominated the mesozooplankton community. An ‘offshore’ and a ‘coastal’ copepod assemblage were defined in the surface layer (0–50 m) only during March when differences in environmental conditions (i.e., temperature, salinity and fluorescence) were strong between the two areas. Copepod vertical community structure in offshore waters differed between sampling months. In March one assemblage (0–200 m) was mainly identified, while in September three distinct assemblages (0–50, 50–100 and 100–200 m) were observed, related to different vertical distribution patterns of the various copepod species. A pronounced seasonal change of the dominant copepods was evident in the surface layer, where strong differences in hydrological properties were observed from March to September. Below this layer, the copepod community was relatively stable showing decreasing seasonal differences with increasing depth.     

Waste paper and clinoptilolite as a bulking material with dewatered anaerobically stabilized primary sewage sludge (DASPSS) for compost production

Environmental problems associated with sewage sludge disposal have prompted strict legislative actions over the past few years. At the same time, the upgrading and expansion of wastewater treatment plants have greatly increased the volume of sludge generated. The major limitation of land application of sewage sludge compost is the potential for high heavy metal content in relation to the metal content of the original sludge. Composting of sewage sludge with natural zeolite (clinoptilolite) can enhance its quality and suitability for agricultural use. However, the dewatered anaerobically stabilized primary sewage sludge (DASPSS) contained a low concentration of humic substances (almost 2%), and the addition of the waste paper was necessary in order to produce a good soil conditioner with high concentrations of humics. The final results showed that the compost produced from DASPSS and 40-50% w/w of waste paper was a good soil fertilizer. Finally, in order to estimate the metal leachability of the final compost product, the generalized acid neutralization Capacity (GANC) procedure was used, and it was found that by increasing the leachate pH, the heavy metal concentration decreased. The application of the sequential chemical extraction indicated that metals were bound to the residual fraction characterized as a stabilize fractions.     

Fate and behavior of metal(loid) contaminants in an organic matter-rich shooting range soil: Implications for remediation

This study investigates the fate and behavior of lead (Pb), copper (Cu), antimony (Sb), and arsenic (As) in a shooting range soil. The soil samples were collected from the surface (0–15 cm) and the subsurface (15–40 cm and 40–55 cm) of a grassy and wood chip covered impact area behind a firing position. Optical microscopy images indicate significant amounts of corroded bullet fragments and organic wood chips in the surface soil. Analysis by X-ray powder diffraction (XRPD) and scanning electron microscopy electron dispersive X-ray spectroscopy (SEM-EDS) showed that metallic Pb was transformed into lead oxides (litharge PbO and massicot PbO) and lead carbonates (hydrocerussite Pb₃(CO₃)₂(OH)₂, cerussite PbCO₃, and plumbonacrite Pb₅(CO₃)₃O(OH)₂). Rietveld quantification indicated the surface soil contained 14.1% metallic Pb, 17.9% hydrocerussite, 5.2% plumbonacrite, 5.9% litharge, and 3.9% massicot on a dry weight basis, or a total of 39.7% Pb, far in excess of lead concentrations typically found in US shooting range soils. Metallic Cu (bullet jacket material) appeared stable as no secondary minerals were detected in the surface soil. As and Sb concentrations were on the order of 1,057 mg/kg and 845 mg/kg respectively. The elevated soil pH coupled with high organic carbon content is thought to have caused downward migration of metals, especially for Pb, since 4,153 mg Pb/kg was observed at a depth of 55 cm. More than 60% of Pb was concentrated in the coarse soil (> 0.425 mm) fraction, suggesting soil clean-up possible by physical soil washing may be viable. The concentrations of Pb, As, and Sb in the toxicity characteristic leaching procedure (TCLP) extracts were 8,869 mg/L, 6.72 mg/L, and 6.42 mg/L respectively, were above the USEPA non-hazardous regulatory limit (As and Pb) of 5 mg/L. The elevated Sb and As concentrations draw concern because there is historically limited information concerning these metals at firing ranges and several values exceeded local soil cleanup criteria. As the high Pb concentrations appeared to be linked to the presence of organic-rich berm cover materials, the use of wood chips as berm cover to prevent soil erosion requires reconsideration as a shooting range management practice.     

Electrochemical detoxification of four phosphorothioate obsolete pesticides stocks

The phosphorothioate pesticides are widely used for crop production and fruit tree treatment, but their disposal causes serious environmental problems. Four commercial phosphorothioate pesticides (Demeton-S-methyl, Metamidophos, Fenthion and Diazinon) were treated by an electrolysis system using Ti/Pt as anode and stainless steel 304 as cathode. A number of experiments were run in a laboratory scale pilot plant and the results are presented. For Fenthion the achieved reduction was over 60%, while for Demeton-S-methyl, Metamidophos and Diazinon was more than 50%. Diazinon had the lowest energy demand. The COD/BOD5 ratio was improved considerably after electrolysis for all four pesticides examined. As a conclusion, electrochemical oxidation could be used as a pretreatment method of the pesticides detoxification.     

An Evaluation Approach to Environmental Program and Project Planning

This paper presents the incorporation of realistic practice into the formulation of evaluation methodology in environmental planning. The approach is based on the principles of realistic evaluation. The latter, founded on scientific realist philosophy, offers a complete blueprint for evaluation activities and proposes realistic development in policy making. Combining theory and method, as well as qualitative and quantitative procedures, realistic evaluation focuses on testing theories of how outcomes are generated by specific mechanisms, fired and activated in particular contexts. Its commitment to the belief that evaluation research depends on the investigation of causal explanation underlines the fact that environmental interventions are closely connected with and affect social world. In this way the social dimension in environmental interventions is enhanced and a more sophisticated perspective is introduced in the evaluation process. Realistic evaluation offers to environmental planning and development an actual practice into the conduct of evaluation.     

Biosorption and retention of orthophosphate onto Ca(OH)2-pretreated biomass of Phragmites sp.

The biosorption of phosphorus in the form of orthophosphate(Po) from wastewater using biomass as the sorbent is of potential importance because the Po-loaded biomass could be applied in the agricultural sector as fertilizer and soil conditioner. However, biomass generally displays a very low affinity for Posorption and therefore biomass surface modification is required. In the present study, the biomass(as model grinded leaves of Phragmites sp. were used)was pretreated with Ca(OH)2to enhance Pobiosorption capacity(qe). The results indicate that the alkaline pretreatment resulted in a modification of surface functional groups. It was concluded that the main sorption mechanisms were ligand exchange and electrostatic attraction. A series of experiments were conducted to investigate the performance of the pretreated biomass for Pouptake under various conditions. Isotherm and thermodynamic studies were also applied and analyzed. The biosorption process was best described by the pseudo-second order kinetic model and Langmuir isotherm, which gave a qmaxof 12.27 mg P/g at 25°C and p H 7. The Ca(OH)2treated Phragmites biomass applied in this study for Porecovery may present some potential advantages in terms of costs and environmental impact.     

Single umbilical artery: Prenatal findings

In 450 patients with pregnancy at high risk for fetal malformation and/or intrauterine growth retardation, the umbilical cord was investigated sonographically for the presence of a single umbilical artery. A single umbilical artery was diagnosed in four fetuses between 23 and 33 weeks of gestation and suspected in two. Three cases were overlooked at sonography. All seven surviving fetuses had growth retardation at delivery and four also showed severe malformations. Whenever a single umbilical artery is found at sonography, further work-up is required to rule out associated anomalies, intrauterine growth retardation, or chromosomal abnormality.     

Thermal degradation characteristics and products obtained after pyrolysis of specific polymers found in Waste Electrical and Electronic Equipment

Modern societies strongly support the recycling practices over simple waste accumulation due to environmental harm caused. In the framework of sustainable recycling of plastics from WEEE, pyrolysis is proposed here as a means of obtaining secondary value-added products. The aim of this study was to investigate the thermal degradation and the products obtained after pyrolysis of specific polymers found in the plastic part of WEEE, using thermogravimetric analysis and a pyrolizer equipped with a GC/MS. Polymers studied include ABS, HIPS, PC and a blend having a composition similar to that appearing in WEEE. It was found that, PC shows greater heat endurance compared to the other polymers, whereas ABS depolymerizes in three-steps. The existence of several polymers in the blend results in synergistic effects which decrease the onset and final temperature of degradation. Moreover, the fragmentation occurred in the pyrolyzer, at certain temperatures, resulted in a great variety of compounds, depending on the polymer type, such as monomers, aromatic products, phenolic compounds and hydrocarbons. The main conclusion from this investigation is that pyrolysis could be an effective method for the sustainable recycling of the plastic part of WEEE resulting in a mixture of chemicals with varying composition but being excellent to be used as fuel retrieved from secondary recycling sources.

Open image in new window

     

Forecasting daily pollen concentrations using data-driven modeling methods in Thessaloniki,Greece

Airborne pollen have been associated with allergic symptoms in sensitized individuals, having a direct impact on the overall quality of life of a considerable fraction of the population. Therefore, forecasting elevated airborne pollen concentrations and communicating this piece of information to the public are key issues in prophylaxis and safeguarding the quality of life of the overall population. In this study, we adopt a data-oriented approach in order to develop operational forecasting models (1–7 days ahead) of daily average airborne pollen concentrations of the highly allergenic taxa: Poaceae, Oleaceae and Urticaceae. The models are developed using a representative dataset consisting of pollen and meteorological time-series recorded during the years 1987–2002, in the city of Thessaloniki, Greece. The input variables (features) of the models have been optimized by making use of genetic algorithms, whereas we evaluate the performance of three algorithms: i) multi-Layer Perceptron, ii) support vector regression and iii) regression trees originating from distinct domains of Computational Intelligence (CI), and compare the resulting models with traditional multiple linear regression models. Results show the superiority of CI methods, especially when forecasting several days ahead, compared to traditional multiple linear regression models. Furthermore, the CI models complement each other, resulting to a combined model that performs better than each one separately. The overall performance ranges, in terms of the index of agreement, from 0.85 to 0.93 clearly suggesting the potential operational use of the models. The latter ones can be utilized in provision of personalized and on-time information services, which can improve quality of life of sensitized citizens.