Buchbesprechungen

Ohne Zusammenfassung     

Estimation of the nutrient inputs into river systems – experiences from German rivers

The nutrient discharges from point and diffuse sources in more than 200 German river basins were estimated for the periods 1983–1987 and 1993–1997 employing the MONERIS model. This model distinguishes between six diffuse pathways and point source emissions from waste water treatment plants and direct industrial discharges. It was estimated that the total nitrogen input into the German river systems amounts to about 819,000 t N year^–1 in the period 1993 to 1997. These emissions have decreased since the mid-eighties by about 266,000 t N year^–1, mainly caused by the reduction of point discharges. For phosphorus the emissions have been reduced by 56,290 t P year^–1 and amount to 37,250 t P year^–1 in the period 1993–1997. Based on emission data a retention module estimates riverine nutrient loads. The comparison of the model output with the observed loads shows a deviation as low as 30% and 50% for nitrogen and phosphorus, respectively. The regional resolution of the model indicates the relative importance of different pathways for phosphorus and nitrogen input into river systems. Electronic Publication     

Evaluation of amniotic fluid cell filtration: An experimental approach to early amniocentesis

Prior to a prospective application of amniotic fluid (AF) cell filtration to early amniocentesis, we tested the technique on a surplus from mid-trimester samples. By using the same sample size of 5 ml in experiments with a filter and in routine diagnostic procedures (control), we evaluated an optimal filter system. The prolonged culture time of filtered cells and the reduced number of clones are most probably due to mechanical stress (filtration pressure), whereas loss of the cells by adhesion to the filter system, and an AF-free culture medium (growth factors) are suggested to be less important. The AF cells are very sensitive to mechanical stress. Slow filtration (⩽3 ml AF/min) through filters with a high porosity and the largest possible pore size should be preferred. A mixed cellulose ester filter membrane with a pore size of 5·0 μm proved to be the most efficient, allowing harvest of the filtered cells after only a slight prolongation of the culture time (+2·4 days) compared with unfiltered aliquots. A filter set with a bypass connected by three-way taps allows cell filtration during either aspiration or reinjection of the AF. Cell filtration after amniocentesis and consecutive reverse flushing of the membrane with the appropriate amount of culture medium proved to be the best with regard to easy handling and reducing the risk of bacterial contamination.     

Bamboo in climate change and rural livelihoods

Climate change negotiations, assessments, and greenhouse gas inventory guidelines have all but bypassed bamboo. Disallowing stands of tree-like bamboos as forests disparages their function in the carbon (C) cycle, and disregards pillars of smallholder livelihoods. Exposing bamboo not as a panacea, but as an overlooked option for C conservation, sequestration, and adaptation, we screen details of distribution, morphology, growth, physiology, and impacts for pertinence to climate change. Additional to 40 million hectares of existing bamboo forests, many potential host countries for C projects harbor suitable sites. Definitions, methods and default values, such as the root/shoot- ratio, biomass conversion factors, allometric equations and sampling variables need adjusting. Rapid maturation, persistent rhizomes, a rich palette of species, and wind-firmness may mitigate risk. Bamboos can accommodate agro-and urban forestry, and reign in unsustainable shifting cultivation. Distribution functions of bamboo biomass stocks and growths do not deviate drastically from those of trees. If anything, bamboo stocks are slightly lower, and growths slightly higher, with medians of 87 t*ha⁻¹ and 10.5 t*ha⁻¹*yr⁻¹, respectively. However, bamboo’s outstanding socio-economic effects might well determine its future in mitigation and adaptation. Early, continuous yields, selective harvesting on even small parcels of land, low capital and high labor intensity, virtually 100% conversion efficiency to about 1,500 products, and, typically, 75% of economic returns benefiting rural people are advantageous attributes. Regional studies on suitability, silviculture, yields, economics, risk, and C assessment would strengthen bamboo’s function as ‘the poor man’s timber’ and promote its niche as the smallholder’s C sink.     

On the economics of energy labels in the housing market

Energy efficiency in the residential housing market can play an important role in the reduction of global carbon emissions. This paper reports the first evidence on the market adoption and economic implications of energy performance certificates implemented by the European Union. The results show that adoption rates are low and declining over time, coinciding with a negative sentiment regarding the label in the popular media. Labels are clustered among smaller, post-war homes in neighborhoods with more difficult selling conditions. We also document that geographic variation in the adoption rate of energy labels is positively related to the fraction of “green” voters during the 2006 national elections. Within the sample of labeled homes, the energy label creates transparency in the energy efficiency of dwellings. Our analysis shows that consumers capitalize this information into the price of their prospective homes.     

Editorial: über die Zukunft deutschsprachiger wissenschaftlicher Zeitschriften

Ohne Zusammenfassung     

Estimation of plant protection product application dates for environmental fate modeling based on phenological stages of crops

According to the EU directive 91/414/EEC potential environmental concentrations of pesticides have to be assessed with environmental fate models. For the calculation of pesticide concentrations it is necessary to provide an application date which has to match the specific Biologische Bundesanstalt, Bundesamt, Chemische Industrie (BBCH) stage at which the pesticide shall be applied. If these application dates are not available for a specific stage, crop and country they must be estimated, which adds an additional uncertainty to the predicted concentrations. In the present study, we therefore evaluate to which extent application dates can be derived from phenological data. For this analysis phenological data, converted to BBCH stages, of two field crops provided by the German Weather Service (DWD) were analyzed. We found a linear correlation between BBCH stages and the respective appearance dates, which can be used for interpolation of appearance dates of specific BBCH stages. Remarkably, when comparing BBCH stages from Germany and the Czech Republic almost identical correlations of appearance dates and BBCH stages were found. In the next step, soil and climate data from Joint Research Centre (JRC) were analyzed together with phenological data in order to evaluate if BBCH stages can be estimated for countries with other climate or soil conditions. This analysis revealed that temperature, global radiation and evaporation were the parameters with the strongest impact. These parameters were used for estimating appearance dates of BBCH stages for other countries. Exemplarily, appearance dates for maize BBCH were calculated for Italy. Estimated and observed appearance dates showed a high concordance (on average six days difference). Finally, the political of impact a variation of a few days on calculated pesticide concentration was analyzed. Exemplarily, the pesticide fate model FOCUS PEARL was used to estimate pesticide groundwater concentrations. When calculating concentrations for application dates varying by ± two weeks, concentrations in groundwater usually varied very little. The highest variation was found for application at BBCH 30 in maize (6.6 % variation over all scenarios). These results showed that the uncertainty included in the estimation of appearance dates of BBCH stages for other countries has a relatively small effect on the results of PEARL and consequentially on the decision of the pesticide risk assessment by changing only the application date.     

Policies and regulations for Brazil’s artisanal gold mining sector: analysis and recommendations

In Brazil, artisanal and small-scale gold mining (ASGM) produces in the range of 6 tonnes of gold (Au) per annum, and employs approximately 200,000 people. Most of this mining activity is in the Amazon region, where miners have been extracting gold for more than 40 years. In the Tapajos River Basin, assessments indicate that around 99% of miners operate without the environmental and mining permits required by law. This is a result of a combination of unrealistic or lack of proper policies and regulations, lack of political will, lack of infra-structure to enforce the existing regulations and lack of incentives to miners to comply with legal requirements.In this article, we analyze a group of 20 laws, decrees and resolutions in Brazil, focusing on how idiosyncrasies in these regulations reveal gaps between policy and reality in ASGM areas. Artisanal miners operate in vast and remote areas and the government lacks the resources (personnel, vehicles, information and materials) to enforce the laws. Our analysis emphasizes the need for creating new government commitments and identifying priority areas where government agents can focus their efforts.There is no single solution for the environmental, health, technical and socio-economic problems associated with ASGM. However, a realistic approach should consider improving the level of education of miners, creating government programs to provide technical assistance in the field, simplifying administrative procedures and ensuring adequate measures for enforcement.