Assessment of potentially harmful elements pollution in the Calore River basin (Southern Italy)

The geographical distribution of concentration values for harmful elements was determined in the Campania region, Italy. The study area consists of the drainage basin of the River Calore, a tributary of the river Volturno, the largest Southern Italian river. The results provide reliable analytical data allowing a quantitative assessment of the trace element pollution threat to the ecosystem and human health. Altogether 562 stream sediment samples were collected at a sampling density of 1 site per 5 km². All samples were air-dried, sieved to <100 mesh fraction and analyzed for 37 elements after an aqua regia extraction by a combination of ICP-AES and ICP-MS. In addition to elemental analysis, gamma-ray spectrometry data were collected (a total of 562 measurements) using a hand-held Scintrex GRS-500 spectrometer. Statistical analyses were performed to show the single-element distribution and the distribution of elemental association factor scores resulting from R-mode factor analyses. Maps showing element distributions were made using GeoDAS and ArcGIS software. Our study showed that, despite evidence from concentrations of many elements for enrichment over natural background values, the spatial distribution of major and trace elements in Calore River basin is determined mostly by geogenic factors. The southwestern area of the basin highlighted an enrichment of many elements potentially harmful for human health and other living organisms (Al, Fe, K, Na, As, Cd, La, Pb, Th, Tl, U); however, these anomalies are due to the presence of pyroclastic and alkaline volcanic lithologies. Even where sedimentary lithologies occur, many harmful elements (Co, Cr, Mn, Ni) showed high concentration levels due to natural origins. Conversely, a strong heavy metal contamination (Pb, Zn, Cu, Sb, Ag, Au, Hg), due to an anthropogenic contribution, is highlighted in many areas characterized by the presence of road junctions, urban settlements and industrial areas. The enrichment factor of these elements is 3–4 times higher than the background values. The southwestern area of the basin is characterized by a moderate/high degree of contamination, just where the two busiest roads of the area run and the highest concentration of industries occurs.     

Historical changes in the food and water supply systems of the New York City Metropolitan Area

The history of New York City (NYC) is much shorter than those of most European cities, but New York shares in common the problem of providing sufficient water and food to its inhabitants from its watershed and foodshed. These resource provision areas have grown over time and changed in character as they expanded in tandem with the growth of the city. In contrast to some cities, such as Paris, which historically has been supported by local food production, NYC??s status as a trade center has enabled the supply of food from distant sources from early in its history. NYC??s transportation system has rapidly evolved from early roads to canals, railroads, and modern surface and air transport networks. The development of the hydraulic engineering of the City??s reservoir, aqueduct, and tunnel system determined the extent of its water supply watersheds. Deviations from general growth trends in food and water consumption have occurred due to environmental and economic disruptions. As the growth of the city slowed in the last few decades, environmental technology has reduced the impact of the City on its environment, due to water metering, reduction of leakage, and improvements in waste treatment. However, per capita food consumption in the US continues to increase, with implications for the environmental health of New York and its region, as well as other centers of net anthropogenic nutrient inputs.     

PCB congener distribution in estuarine water,sediment and fish samples: implications for monitoring programs

Traditional analyses for PCBs in environmental matrices havefocused on commercial Aroclor mixtures with detection limits inthe 100 to 1000 part per trillion range. This approach hasrecently been supplanted by analyses for specific PCB compoundscalled congeners with detection limits less than 0.5 ppt. At thenational level, total PCB determinations based upon selected PCBcongeners typically characterize analyses of surface water,sediment and tissue. These federal efforts rely on a suite of 18to 20 congeners out of a total of 209 congeners to characterizetotal PCB. The present study compares total PCB estimates basedupon this subset of congeners with estimates based upon anexpanded list of 81 congeners from water, sediment and fishtissue collected from the Delaware Estuary.Analytical data from monitoring programs conducted in theDelaware Estuary by the Delaware River Basin Commission, NOAANational Ocean Service, U.S. Army Corps of Engineers and the U.S.Environmental Protection Agency from 1996 to 1998 were evaluated. Total PCB estimates derived from the different sets of congeners,including the adjustment factor of 2.0 used by NOAA, werecompared. This evaluation indicated that differences existbetween total PCB determinations based upon these approaches, andthat these differences vary depending on the matrix analyzed. The bias associated with using a smaller set of PCB congeners,and the implications for risk assessment are discussed.     

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.     

Temperature and discharge variations in natural mineral water springs due to climate variability: a case study in the Piedmont Alps (NW Italy)

Environmental Geochemistry and Health - In the context of global climate change, understanding the relationships between climate and groundwater is increasingly important. This study in the NW Alps...     

Characterization and identification of trends in average ambient ozone and fine particulate matter levels through trajectory cluster analysis in eastern Canada

In many locations in Eastern Canada, ambient levels of fine particulate matter (PM,25) and surface ozone (O3) depend on airflow direction and synoptic scale meteorological conditions. In this study, a cluster analysis was performed on 10 yr (1994-2003) of back-trajectory data for 11 locations in Eastern Canada, resulting in the identification of 10 unique back-trajectory clusters (or airflows) for each location. The airflows were then used to characterize and identify spatial and temporal trends in the daily maximum 8-hr average O3 (dmax 8-hr O3) and the daily average PM2.5 levels. Results showed that airflows from the southwest passing over Michigan and Southern Ontario were associated, on average, with the highest O3 levels at most locations in Eastern Canada. For PM2.5, the highest levels occurred with airflows from the Eastern Ohio River Valley. At major urban locations in Ontario and Quebec, the warm season mean (May to September) dmax 8-hr O3 and the annual mean PM2.5 were, on average, 12 parts per billion and 7.6 microg/m3 higher, respectively, than airflows from the north. Elevated levels of O3 and PM2.5 also occurred under light airflows, and, on average, the levels under light airflows were higher than their nonlight counterparts. At several locations in Canada, including Toronto, Montreal, Quebec City, and Kejimkujik, the annual warm season mean dmax 8-hr O3 experienced a statistically significant (95% confidence) increasing trend over the 10-yr period. When airflow direction was considered, a number of locations experienced statistically significant upward trends in O3 for airflow from the north and northwest. Several locations also showed significant upward trends associated with airflow from the southwest passing over Michigan and Southwestern Ontario. Although there are no statistically significant downward trends, airflows from the southwest have shown a reduction in O3 levels in Southwestern Ontario in more recent years.     

High concern chemicals in top layer sediments of the northern Adriatic seabed as markers of old waste dumpings

The results are presented of a survey planned to assess the presence of high concern chemicals in sediments collected in a northern sector of the Adriatic sea neighboring the Venice lagoon. For the assessment, persistent marker chemicals were selected from the families of polycyclic aromatic hydrocarbons, polychlorobiphenyls, polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and chlorinated pesticides. Based on the chemical-specific concentrations and PCDD+PCDF profiles determined in the sediments analyzed, dumping zones appear to have existed approximately 5-6km away from lagoon shoreline. Contamination levels exceed the quality criteria established by the pertinent Italian national regulation at many sampling sites, eventually reflecting ("fingerprinting") industrial activities once performed in the industrial settlement of Porto Marghera within the Venice lagoon. In coastal samples, concentration levels appear to be lower than those determined at offshore sampling sites.     

Regression Analysis Model Applied to Biomonitoring Studies

A regression model is proposed for studying the relationship between trace metals concentrations and weights of individuals of Monodonta turbinata (Born), a gastropod mollusc used as a trace metal biomonitor of marine coastal areas. The model herein presented was developed including sites as reference factors and showed very good correlations. The prevision model of contamination gave good results for this kind of pollutants, and it can be used as a tool for monitoring programmes.