Demonstration of methods to reduce E. coli runoff from dairy manure application sites

Contamination by bacteria is a leading cause of impairment in U.S. waters, particularly in areas of livestock agriculture. We evaluated the effectiveness of several practices in reducing Escherichia coli levels in runoff from fields receiving liquid dairy (Bos taurus) manure. Runoff trials were conducted on replicated hay and silage corn (Zea mays L.) plots using simulated rainfall. Levels of E. coli in runoff were approximately 10(4) to 10(6) organisms per 100 mL, representing a significant pollution potential. Practices tested were: manure storage, delay between manure application and rainfall, manure incorporation by tillage, and increased hayland vegetation height. Storage of manure for 30 d or more consistently and dramatically lowered E. coli counts in our experiments, with longer storage providing greater reductions. Manure E. coli declined by > 99% after approximately 90 d of storage. On average, levels of E. coli in runoff were 97% lower from plots receiving 30-d-old and > 99% lower from plots receiving 90-d-old manure than from plots where fresh manure was applied. Runoff from hayland and cornland plots where manure was applied 3 d before rainfall contained approximately 50% fewer E. coli than did runoff from plots that received manure 1 d before rainfall. Hayland vegetation height alone did not significantly affect E. coli levels in runoff, but interactions with rainfall delay and manure age were observed. Manure incorporation alone did not significantly affect E. coli levels in cornland plot runoff, but incorporation could reduce bacteria export by reducing field runoff and interaction with rainfall delay was observed. Extended storage that avoids additions of fresh manure, combined with application several days before runoff, incorporation on tilled land, and higher vegetation on hayland at application could substantially reduce microorganism loading from agricultural land.     

Sorption and degradation of pesticides in nursery recycling ponds

Knowledge of pesticide distribution and persistence in nursery recycling pond water and sediment is critical for preventing phytotoxicity of pesticides during water reuse and to assess their impacts to the environment. In this study, sorption and degradation of four commonly used pesticides (diazinon, chlorpyrifos, chlorothalonil, and pendimethalin) in sediments from two nursery recycling ponds was investigated. Results showed that diazinon and chlorothalonil were moderately sorbed [K(OC) (soil organic carbon distribution coefficient) from 732 to 2.45 x 10(3) mL g(-1)] to the sediments, and their sorption was mainly attributable to organic matter content, whereas chlorpyrifos and pendimethalin were strongly sorbed (K(OC) > or = 7.43 x 10(3) mL g(-1)) to the sediments, and their sorption was related to both organic matter content and sediment texture. The persistence of diazinon and chlorpyrifos was moderate under aerobic conditions (half-lives = 8 to 32 d), and increased under anaerobic conditions (half-lives = 12 to 53 d). In contrast, chlorothalonil and pendimethalin were quickly degraded under aerobic conditions with half-lives < 2.8 d, and their degradation was further enhanced under anaerobic conditions (half-lives < 1.9 d). The strong sorption of chlorpyrifos and pendimethalin by the sediments suggests that the practice of recycling nursery runoff would effectively retain these compounds in the recycling pond, minimizing their offsite movement. The prolonged persistence of diazinon and chlorpyrifos, however, implies that incidental spills, such as overflows caused by storm events, may contribute significant loads of such pesticides into downstream surface water bodies.     

Acid generation upon thermal concentration of natural water: The critical water content and the effects of ionic composition

Thermal evaporation of a variety of simulated pore waters from the region of Yucca Mountain, Nevada, produced acidic liquids and gases during the final stages of evaporation. Several simulated pore waters were prepared and then thermally distilled in order to collect and analyze fractions of the evolved vapor. In some cases, distillates collected towards the end of the distillation were highly acidic; in other cases the pH of the distillate remained comparatively unchanged during the course of the distillation. The results suggest that the pH values of the later fractions are determined by the initial composition of the water. Acid production stems from the hydrolysis of magnesium ions, especially at near dryness. Near the end of the distillation, magnesium nitrate and magnesium chloride begin to lose water of hydration, greatly accelerating their thermal decomposition to form acid. Acid formation is promoted further when precipitated calcium carbonate is removed. Specifically, calcium chloride-rich pore waters containing moderate (10–20 ppm) levels of magnesium and nitrate and low levels of bicarbonate produced mixtures of nitric and hydrochloric acid, resulting in a precipitous drop in pH to values of 1 or lower after about 95% of the original volume was distilled. Waters with either low or moderate magnesium content coupled with high levels of bicarbonate produced slightly basic fractions (pH 7–9). If calcium was present in excess of bicarbonate, waters containing moderate levels of magnesium produced acid even in the presence of bicarbonate, due to the precipitation of calcium carbonate. Other salts such as halite and anhydrite promote the segregation of acidic vapors from residual basic solids. The concomitant release of wet acid gas has implications for the integrity of the alloys under consideration for containers at the Yucca Mountain nuclear waste repository. Condensed acid gases at very low pH, especially mixtures of nitric and hydrochloric acid, are capable of corroding even alloys, such as nickel-based Alloy 22, which are considered to be corrosion-resistant under milder conditions.     

Air pollutant concentrations near three Texas roadways, part II: Chemical characterization and transformation of pollutants

Spatial gradients of vehicular emitted air pollutants were measured in the vicinity of three roadways in the Austin, Texas area: (1) State Highway 71 (SH-71), a heavily traveled arterial highway dominated by passenger vehicles; (2) Interstate 35 (I-35), a limited access highway north of Austin in Georgetown; and (3) Farm to Market Road 973 (FM-973), a heavily traveled surface roadway with significant truck traffic. A mobile monitoring platform was used to characterize the gradients of CO and NO_x concentrations with increased distance from each roadway, while concentrations of carbonyls in the gas-phase and fine particulate matter mass and composition were measured at stationary sites upwind and at one (I-35 and FM-973) or two (SH-71) downwind sites. Regardless of roadway type or wind direction, concentrations of carbon monoxide (CO), nitric oxide (NO), and oxides of nitrogen (NO_x) returned to background levels within a few hundred meters of the roadway. Under perpendicular wind conditions, CO, NO and NO_x concentrations decreased exponentially with increasing distance perpendicular to the roadways. The decay rate for NO was more than a factor of two greater than for CO, and it comprised a larger fraction of NO_x closer to the roadways than further downwind suggesting the potential significance of near roadway chemical processing as well as atmospheric dilution. Concentrations of most carbonyl species decreased with distance downwind of SH-71. However, concentrations of acetaldehyde and acrolein increased farther downwind of SH-71, suggesting chemical generation from the oxidation of primary vehicular emissions. The behavior of particle-bound organic species was complex and further investigation of the size-segregated chemical composition of particulate matter (PM) at increasing downwind distances from roadways is warranted. Fine particulate matter (PM_2.5) mass concentrations, polycyclic aromatic hydrocarbons (PAHs), hopanes, and elemental carbon (EC) concentrations generally exhibited concentrations that decreased with distance downwind of SH-71. Concentrations of organic carbon (OC) increased from upwind concentrations immediately downwind of SH-71 and continued to increase further downwind from the roadway. This behavior may have primarily resulted from condensation of semi-volatile organic species emitted from vehicle sources with transport downwind of the roadway.     

Air pollutant concentrations near three Texas roadways,Part I: Ultrafine particles

Vehicular emitted air pollutant concentrations were studied near three types of roadways in Austin, Texas: (1) State Highway 71 (SH-71), a heavily traveled arterial highway dominated by passenger vehicles; (2) Interstate 35 (I-35), a limited access highway north of Austin in Georgetown; and (3) Farm to Market Road 973 (FM-973), a heavily traveled surface roadway dominated by truck traffic. Air pollutants examined include carbon monoxide (CO), oxides of nitrogen (NO_x), and carbonyl species in the gas-phase. In the particle phase, ultrafine particle (UFP) concentrations (diameter < 100 nm), fine particulate matter (PM_2.5, diameter < 2.5 μm) mass and carbon content and several particle-bound organics were examined. All roadways had an upwind stationary sampling location, one or two fixed downwind sample locations and a mobile monitoring platform that characterized pollutant concentrations fall-off with increased distance from the roadways. Data reported in this paper focus on UFP while other pollutants and near-roadway chemical processes are examined in a companion paper. Traffic volume, especially heavy-duty traffic, wind speed, and proximity to the road were found to be the most important factors determining UFP concentrations near the roadways. Since wind directions were not consistent during the sampling periods, distances along wind trajectories from the roadway to the sampling points were used to study the decay characteristics of UFPs. Under perpendicular wind conditions, for all studied roadway types, particle number concentrations increased dramatically moving from the upwind side to the downwind side. The elevated particle number concentrations decay exponentially with increasing distances from the roadway with sharp concentration gradients observed within 100–150 m, similar to previously reported studies. A single exponential decay curve was found to fit the data collected from all three roadways very well under perpendicular wind conditions. No consistent pattern was observed for UFPs under parallel wind conditions. However, regardless of wind conditions, particle concentrations returned to background levels within a few hundred meters of the roadway. Within measured UFP size ranges, smaller particles (6–25 nm) decayed faster than larger ones (100–300 nm). Similar decay rates were observed among UFP number, surface, and volume.     

Mass conservative,positive definite integrator for atmospheric chemical dynamics

Air quality models compute the transformation of species in the atmosphere undergoing chemical and physical changes. The numerical algorithms used to predict these transformations should obey mass conservation and positive definiteness properties. Among all physical phenomena, the chemical kinetics solver provides the greatest challenge to attain these two properties. In general, most chemical kinetics solvers are mass conservative but not positive definite. In this article, a new numerical algorithm for the computation of chemical kinetics is presented. The integrator is called Split Single Reaction Integrator (SSRI). It is both mass conservative and positive definite. It solves each chemical reaction exactly and uses operator splitting techniques (symmetric split) to combine them into the entire system.The method can be used within a host integrator to fix the negative concentrations while preserving the mass, or it can be used as a standalone integrator that guarantees positive definiteness and mass conservation. Numerical results show that the new integrator, used as a standalone integrator, is second order accurate and stable under large fixed time steps when other conventional integrators are unstable.     

Assessing Landscape Condition Relative to Water Resources in the Western United States: A Strategic Approach

The Environmental Monitoring and Assessment Program (EMAP) is proposing an ambitious agenda to assess the status of streams and estuaries in a 12-State area of the western United States by the end of 2003. Additionally, EMAP is proposing to access landscape conditions as they relate to stream and estuary conditions across the west. The goal of this landscape project is to develop a landscape model that can be used to identify the relative risks of streams and estuaries to potential declines due to watershed-scale, landscape conditions across the west. To do so, requires an understanding of quantitative relationships between landscape composition and pattern metrics and parameters of stream and estuary conditions. This paper describes a strategic approach for evaluating the degree to which landscape composition and pattern influence stream and estuary condition, and the development and implementation of a spatially-distributed, landscape analysis approach.     

Environmental contaminants in freshwater fish and their risk to piscivorous wildlife based on a national monitoring program

Organochlorine chemical residues and elemental concentrations were measured in piscivorous and benthivorous fish at 111 sites from large U.S. river basins. Potential contaminant sources such as urban and agricultural runoff, industrial discharges, mine drainage, and irrigation varied among the sampling sites. Our objectives were to provide summary statistics for chemical contaminants and to determine if contaminant concentrations in the fish were a risk to wildlife that forage at these sites. Concentrations of dieldrin, total DDT, total PCBs, toxaphene, TCDD-EQ, cadmium, chromium, mercury, lead, selenium, and zinc exceeded toxicity thresholds to protect fish and piscivorous wildlife in samples from at least one site; most exceedences were for total PCBs, mercury, and zinc. Chemical concentrations in fish from the Mississippi River Basin exceeded the greatest number of toxicity thresholds. Screening level wildlife risk analysis models were developed for bald eagle and mink using no adverse effect levels (NOAELs), which were derived from adult dietary exposure or tissue concentration studies and based primarily on reproductive endpoints. No effect hazard concentrations (NEHC) were calculated by comparing the NOAEL to the food ingestion rate (dietary-based NOAEL) or biomagnification factor (tissue-based NOAEL) of each receptor. Piscivorous wildlife may be at risk from a contaminant if the measured concentration in fish exceeds the NEHC. Concentrations of most organochlorine residues and elemental contaminants represented no to low risk to bald eagle and mink at most sites. The risk associated with pentachloroanisole, aldrin, Dacthal, methoxychlor, mirex, and toxaphene was unknown because NOAELs for these contaminants were not available for bald eagle or mink. Risk differed among modeled species and sites. Our screening level analysis indicates that the greatest risk to piscivorous wildlife was from total DDT, total PCBs, TCDD-EQ, mercury, and selenium. Bald eagles were at greater risk to total DDT and total PCBs than mink, whereas risks of TCDD-EQ, mercury, and selenium were greater to mink than bald eagle.     

Percentile estimation using variable censored data

Much progress has been made in recent years to address the estimation of summary statistics, using data that are subject to censoring of results that fall below the limit of detection (LOD) for the measuring instrument. Truncated data methods (e.g., Tobit regression) and multiple-imputation are two approaches for analyzing data results that are below the LOD. To apply these methods requires an assumption about the underlying distribution of the data. Because the log-normal distribution has been shown to fit many data sets obtained from environmental measurements, the common practice is to assume that measurements of environmental factors can be described by log-normal distributions. This article describes methods for obtaining estimates of percentiles and their associated confidence intervals when the results are log-normal and a fraction of the results are below the LOD. We present limited simulations to demonstrate the bias of the proposed estimates and the coverage probability of their associated confidence intervals. Estimation methods are used to generate summary statistics for 2,3,7,8-tetrachloro dibenzo-p-dioxin (2,3,7,8-TCDD) using data from a 2001 background exposure study in which PCDDs/PCDFs/cPCBs in human blood serum were measured in a Louisiana population. Because the congener measurements used in this study were subject to variable LODs, we also present simulation results to demonstrate the effect of variable LODs on the multiple-imputation process.     

Agricultural opportunities to mitigate greenhouse gas emissions

Agriculture is a source for three primary greenhouse gases (GHGs): CO(2), CH(4), and N(2)O. It can also be a sink for CO(2) through C sequestration into biomass products and soil organic matter. We summarized the literature on GHG emissions and C sequestration, providing a perspective on how agriculture can reduce its GHG burden and how it can help to mitigate GHG emissions through conservation measures. Impacts of agricultural practices and systems on GHG emission are reviewed and potential trade-offs among potential mitigation options are discussed. Conservation practices that help prevent soil erosion, may also sequester soil C and enhance CH(4) consumption. Managing N to match crop needs can reduce N(2)O emission and avoid adverse impacts on water quality. Manipulating animal diet and manure management can reduce CH(4) and N(2)O emission from animal agriculture. All segments of agriculture have management options that can reduce agriculture's environmental footprint.