Butyltin levels in several Portuguese coastal areas

This work aimed to report present levels (2007–2008 sampling) of tri- (TBT), di- (DBT), and monobutyltin (MBT) in surface sediments from 11 Portuguese coastal sites and discuss the evolution of BTs contamination in the last two decades. All the samples revealed quantifiable values of TBT, DBT, and MBT with total butyltin concentrations between 1 and 565 ng/g (of Sn in dry sediment). Maximum level of TBT, 66 ng/g, was observed in Sado estuary, at Lisnave site, in the proximity of a big shipyard. MBT decreased site by site by the same order as DBT and TBT did, but its concentrations were much higher in many cases, denoting that TBT contamination was much higher in the past. A comparison with the available previous data confirmed a marked decrease of TBT contamination all over the last years, indicating that the main sources of TBT in Portuguese coastwise stopped effectively.     

Modelling Water Blending—Sensitivity of Optimal Policies

Water blending is modelled as a combination of a linear program and a stochastic dynamic program. Optimal policies are found for linear and integer-linear formulations using both an expected monetary value and conditional value-at-risk criterion. The sensitivity of these solutions to the discretisation over volume and over time is investigated.     

Trace metal levels in Prochilodus lineatus collected from the La Plata River, Argentina

Most of the industrial, urban and sewage discharges are released into the La Plata River, Argentina without any previous treatment. However, few works have investigated the extent of metal contamination. The aim of this study was to assess the levels of cadmium, copper, lead and zinc in liver and gills of adults Prochilodus lineatus collected from three sampling stations along the coast of the La Plata River: Berazategui, Berisso and Atalaya (from north to south). Samplings were performed during 2002 and 2004. Berazategui and Berisso were located nearby the main ducts that discharge the urban and domestic waste disposal from the cities of Buenos Aires and La Plata, respectively. The third station, Atalaya, was free of sewage discharges. Levels of cadmium and copper in liver were always higher than those found in gills. Instead, for lead and zinc, high levels were observed either in liver or gills, depending on the sampling station and the sampling period. In both tissues, the concentrations of metals did not differ significantly between male and female fish. In liver samples, the concentrations of cadmium, copper and zinc tended to increase from north to south. Instead, the levels of lead followed an opposite pattern. No clear tendencies were observed in gill samples. The data may be useful as reference levels of metal contaminants in P. lineatus, the most important fish species in the La Plata River system.     

Spatial distribution of trace metals (Cd, Pb, Hg, Cu, Zn, Fe and Mn) and oligo-elements (Mg, Ca, Na and K) in surface sediments of the Gulf of Tunis (Northern Tunisia)

The purpose of this paper is to evaluate the levels and spatial distribution of trace metals (Cd, Pb, Cu, Hg, Zn, Fe, and Mn), oligo-elements (Mg, Ca, Na and K), total organic carbon (TOC), and total nitrogen (TN) in the fine fraction of surface sediments collected from 38 stations in Gulf of Tunis (Mediterranean Sea, Northern Tunisia) between 2004 and 2005. The results showed that metals, oligo-elements, TOC, and TN concentrations in the sediments of the Gulf of Tunis are generally low compared to those found in other similar coastal marine areas. The spatial distribution of metals showed areas of major accumulation of Pb, Cd, Cu, Fe, and Zn in the central area of the Gulf and near the Mejerda River. The marine currents are influencing factors on metal accumulation in sediments. The principal component analysis applied to our elemental analytical results showed that there is a positive correlation between Fe, Zn, Cu, and Pb. These metals have a stronger affinity with site connection in the sediments than Ca and Mn.     

Polycyclic aromatic hydrocarbon contamination in stormwater detention pond sediments in coastal South Carolina

The purpose of this study was to characterize the polycyclic aromatic hydrocarbon (PAH) contamination in the sediments of stormwater detention ponds in coastal South Carolina. Levels of the sum of PAH analytes were significantly higher in the sediments of commercial ponds compared to that of reference, golf course, low-density residential, and high-density residential ponds. Isomer ratio analysis suggested that the predominant source of PAHs were pyrogenic; however, many ponds had a PAH signature consistent with mixed uncombusted and combusted PAH sources. PAH levels in these sediments could be modeled using both pond drainage area and pond surface area. These results demonstrate that the sediment from most commercial ponds, and a few residential and golf course ponds, were moderately contaminated with PAHs. PAH levels in these contaminated ponds exceeded between 42% and 75% of the ecological screening values for individual PAH analytes established by US EPA Region IV, suggesting that they may pose a toxicological risk to wildlife.     

Monsoon-induced changes in the size-fractionated phytoplankton biomass and production rate in the estuarine and coastal waters of southwest coast of India

Changes in the autotrophic pico- (0.2–2 μm), nano- (2–20 μm), and microplankton (>20 μm) biomass (chlorophyll a) and primary production were measured in the estuarine and coastal waters off Cochin, southwest coast of India during the onset and establishment of a monsoon. During this period, the estuary was dominated by nutrient-rich freshwater, whereas the coastal waters were characterized with higher salinity values (>30 psu) and less nutrients. The average surface chlorophyll a concentrations and primary production rates were higher in the estuary (average 13.7 mg m^???3 and 432 mgC m^???3 day^???1) as compared to the coastal waters (5.3 mg m^???3 and 224 mgC m^???3 day^???1). The nanoplankton community formed the major fraction of chlorophyll a and primary production, both in the estuary (average 85 ± SD 8.3% and 81.2 ± SD 3.2%) and the coastal waters (average 73.2 ± SD 17.2% and 81.9 ± 15.7%). Nanoplankton had the maximum photosynthetic efficiency in the coastal waters (average 4.8 ± SD 3.9 mgC mgChl a m^???3 h^???1), whereas in the estuary, the microplankton had higher photosynthetic efficiency (average 7.4 ± 7 mgC mgChl a m^???3 h^???1). The heavy cloud cover and increased water column turbidity not only limit the growth of large-sized phytoplankton in the Cochin estuary and coastal waters but also support the proliferation of nanoplankton community during the monsoon season, even though large variation in nanoplankton chlorophyll a and production exists between these two areas.     

An assessment of heavy metal contamination in surface sediment using statistical analysis

The distribution and accumulation of heavy metals in the sediments, especially those nearest of wastewater discharges of south of Spain, were investigated. Sediment samples from 14 locations were collected and characterised for metal content (e.g. Ni, Cu, Zn, Cr, Pb, Mn, Cd and Hg), organic carbon, total nitrogen, total phosphorous, n-hexane-extractable material, carbonates and grain size. Concentration data were processed using correlation analysis and factor analysis. The correlation analysis of concentrations data showed important positive correlations among organic carbon, total phosphorus, Cu, Zn, Cd and Hg, otherwise weak correlations among Mn, Cr, Ni and CO₃ ^2???, indicating that these metals have complicated geochemical behaviours. The use of statistical factor analysis also confirmed these results. Sediments pollution assessment was carried out using geoaccumulation and metal pollution indexes (MPI₈). The results revealed that sediments of Cádiz bay and Sancti Petri channel were uncontaminated with the studied metals.     

Acute aquatic toxicity of western juniper (Juniperus occidentalis) foliage and Port Orford cedar (Chamaecyparis lawsoniana) heartwood oils

Recently, interest has developed for using essential oils from Western juniper (Juniperus occidentalis) foliage and Port Orford cedar (Chamaecyparis lawsoniana) heartwood in commercial products such as pest repellents and cosmetics. In order to gauge the relative toxicological risk that these oils pose to freshwater and marine organisms, the acute aquatic toxicity of these oils was evaluated using OPPTS guidelines to the cladoceran Daphnia magna, the rainbow trout Oncorhynchus mykiss and the green alga Selenastrum capricornutum. For western juniper foliage oil, no toxicity was exhibited toward D. magna or O. mykiss, even at 5.0 mg/L (the highest concentration tested and limit of solubility). For toxicity to S. capricornutum using algal cell density, the 72 and 96 h EC₅₀ value was 1.7 mg/L and the no observable effect concentration (NOEC) was 0.63 mg/L. For Port Orford cedar heartwood oil, no toxicity was exhibited toward O. mykiss or S. capricornutum, even at 5.0 mg/L (the highest concentration tested and limit of solubility). The 48-h D. magna EC₅₀ value was 1.9 mg/L; the NOEC values for algal cell density were 1.25 mg/L (72 h) and 0.63 mg/L (96 h). In summary, this study shows that western juniper foliage and Port Orford cedar heartwood oils demonstrate little to no risk to aquatic organisms.     

Evaluation of groundwater quality and its suitability for drinking and agricultural use in Thanjavur city, Tamil Nadu, India

As groundwater is a vital source of water for domestic and agricultural activities in Thanjavur city due to lack of surface water resources, groundwater quality and its suitability for drinking and agricultural usage were evaluated. In this study, 102 groundwater samples were collected from dug wells and bore wells during March 2008 and analyzed for pH, electrical conductivity, temperature, major ions, and nitrate. Results suggest that, in 90% of groundwater samples, sodium and chloride are predominant cation and anion, respectively, and NaCl and CaMgCl are major water types in the study area. The groundwater quality in the study site is impaired by surface contamination sources, mineral dissolution, ion exchange, and evaporation. Nitrate, chloride, and sulfate concentrations strongly express the impact of surface contamination sources such as agricultural and domestic activities, on groundwater quality, and 13% of samples have elevated nitrate content (>45 mg/l as NO₃). PHREEQC code and Gibbs plots were employed to evaluate the contribution of mineral dissolution and suggest that mineral dissolution, especially carbonate minerals, regulates water chemistry. Groundwater suitability for drinking usage was evaluated by the World Health Organization and Indian standards and suggests that 34% of samples are not suitable for drinking. Integrated groundwater suitability map for drinking purposes was created using drinking water standards based on a concept that if the groundwater sample exceeds any one of the standards, it is not suitable for drinking. This map illustrates that wells in zones 1, 2, 3, and 4 are not fit for drinking purpose. Likewise, irrigational suitability of groundwater in the study region was evaluated, and results suggest that 20% samples are not fit for irrigation. Groundwater suitability map for irrigation was also produced based on salinity and sodium hazards and denotes that wells mostly situated in zones 2 and 3 are not suitable for irrigation. Both integrated suitability maps for drinking and irrigation usage provide overall scenario about the groundwater quality in the study area. Finally, the study concluded that groundwater quality is impaired by man-made activities, and proper management plan is necessary to protect valuable groundwater resources in Thanjavur city.     

Use of microbial activity measurements for monitoring RBC biofilms

Fixed biomass technologies, such as rotating biological contactors or biodiscs, have been applied for wastewater depuration both in large and medium–small-sized agglomerations. Biofilm’s composition and microorganism activity are essential parameters for the successful operation and control of these systems. Biofilm’s thickness and total dry weight have been widely used for biofilm’s characterization but, actually, are not sufficient to describe biofilm activity. In fact, biofilm’s activity is not proportional to the quantity of fixed biomass, but increases with the thickness of biofilm up to a determined level called the “active thickness”. Above this level, the diffusion of nutrients through the film becomes a limiting factor. A stable, thin, and active biofilm thus offers numerous advantages in water and wastewater treatment. Different parameters have been used to evaluate biofilm’s activity. The specific oxygen uptake rate, INT-dehydrogenase activity, and the ratio active/total cells have been applied for that purpose. These methods are not only simple and rapid but also sensitive, precise, and representative. The results obtained confirm the potential of the microbial activity measurements studied for an accurate biofilm’s characterization and biomass activity estimation in fundamental research and for the practical operation and control of fixed biomass depuration systems.