典型河谷城市儿童土壤与灰尘铅暴露风险

为定量评价河谷型城市土壤与灰尘铅对城市儿童健康的影响与风险,结合野外调查的基础上,以陕西渭河谷地典型工业城市宝鸡、西安、渭南和铜川为研究区域,以定量分析河谷型城市儿童环境铅暴露为核心,收集4个城市土壤与灰尘分析样品总计243个。利用X射线荧光光谱法测定了4个城市土壤与灰尘铅的含量;采用BCR连续形态分级法探究了城市土壤与灰尘重金属铅地球化学形态分布与迁移特征;根据US EPA污染物暴露与健康风险评价模型对城市儿童铅暴露进行了评价。研究结果表明渭河谷地典型城市宝鸡、铜川、西安和渭南城市土壤与灰尘铅浓度(X±SD)分别为(409.2±52.54)和(624.70±66.15)mg·kg-1、(357.47±41.37)和(592.60±36.78)mg·kg-1、(61.4±13.31)和(78.42±14.89)mg·kg-1、(46.71±12.11)和(64.7±13.76)mg·kg-1,均高出陕西省土壤铅背景值;污染水平依次为宝鸡铜川西安渭南。4个河谷型城市土壤与灰尘重金属铅发生整体迁移的趋势为:宝鸡城市灰尘(90.71%)西安城市灰尘(84.74%)≥宝鸡城市土壤(83.12%)渭南城市灰尘(74.89%)≥西安城市土壤(74.50%)铜川城市灰尘(72.49%)铜川城市土壤(57.50%)渭南城市土壤(53.79%)。可见,铅在均在城市灰尘中的迁移趋势远大于相应的城市土壤。4个城市土壤与灰尘均表现出较大的儿童暴露致癌风险,宝鸡和铜川城市儿童土壤与灰尘铅暴露也分别存在非致癌风险,风险程度依次为宝鸡铜川西安渭南。儿童铅暴露致癌与非致癌风险程度与其城市土壤和灰尘中铅可氧化态分布呈相似的规律,表明碱性的城市土壤与城市灰尘(p H7)中可氧化态铅可能是导致河谷型城市儿童铅暴露风险和儿童血铅污染的主要形态和因素。由此,城市燃煤排放与含铅制品的加工等活动可能是渭河谷地河谷型城市儿童血铅与铅暴露最主要的贡献源,必须采取长期有效的监测与控制措施。     

利用N-乙酰-β-D-氨基葡萄糖苷酶含量评价农药对花翅摇蚊种群发育的影响

为了进一步探索种群水平的生态风险评估方法,本文利用β-N-Acetyl-D-glucosaminidase(NAGase)的变化量来监测农药对摇蚊种群发育的影响。从花翅摇蚊Chironomus kiiensis体内分离纯化得到电泳纯的NAGase,并通过免疫大白兔制得NAGase的多克隆抗体。运用间接非竞争ELISA法检测抗体特异性,结果表明其与共同存在于水体的一些生物的NAGase的交叉反应率为隆线溞4.41%、老年低额溞3.12%、多刺裸腹溞3.40%、中华薄壳介4.17%、日本沼虾3.23%、白纹伊蚊7.50%、小球藻0.5%。运用抗体测得毒死蜱、氰戊菊酯和阿维菌素3种杀虫剂对于摇蚊NAGase释放量的12 d-EC50分别为1.2012、0.0043和0.6281μg·L-1,以NAGase活力作为测试终点,测得相应的12 d-EC50:1.4765、0.0051和0.6756μg·L-1,两者差异不显著,但均显著低于以死亡作为测试终点的12 d-LC50:4.8171、0.0954和2.1340μg·L-1,且毒力大小均为氰戊菊酯阿维菌素毒死蜱。上述结果表明,利用NAGase多克隆抗体可以特异性地检测农药对花翅摇蚊种群发育的影响。     

Leaching-induced migration and compositional form change of Cu,Zn, and Cd from sludge to loess

Land utilization of sewage sludge has become one of the major issues in environmental mitigation in China. This is particularly important in the Loess Plateau of Northwest China. Sludge enriched with organic matter and nutrients might effectively help to resolve the problems of silty loess soils as evidenced by porosity defect, structural alterations and absence of fertility. After sludge flows into the loess, irrigation water contains heavy metals that leach and migrate into sludge and consequently related human health risks may occur that raise concerns; and this situation needs to be rectified. The characteristics of the vertical migration and composition form change of Cu, Zn, and Cd from composted sludge to loess, and corresponding influencing factors, were investigated by performing a soil column simulation test under the leaching treatment of a one-year irrigation water capacity. Results demonstrated that: (1) composted sludge significantly improved loess fertility, and irrigation leaching transported only a small quantity of organic matter in sludge in the plough layer; (2) although some of the Cu, Zn, and Cd in composted sludge migrated to and concentrated in the middle and upper layers of the soil column during leaching, these metals were mostly retained in the plough layer; and (3) after the leaching treatment of the one-year irrigation water capacity, the compositions of Cu, Zn, and Cd (particularly Cu and Zn) in both plough layer and loess began to stabilize with low concentrations in the exudate. These findings confirmed the applicability of composted sludge in loess regions. This study provided a new insight into the sludge reuse in alkaline soils in arid and semi-arid region.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

Response to environmental flows in the lower Tarim River, Xinjiang, China: ground water

In China's west since the 1950s large-scale ecosystem degeneration has occurred through water diversions for agricultural purposes. Since 2000, 1038 x 10(6) m(3) of water have been released into the Tarim River with the result that water reached the terminal Taitema Lake for the first time in 30 years. This environmental flow raised water-table levels along 350 km of the river. To assess the response of the water-table, a comparison "pristine" site is compared with downstream monitored sites. The results show huge changes in water-table levels. The study verifies that the water-table is extremely responsive to environmental flows, that strong internal similarities exist along the length of the river, and that the effect on the water-table and hence likely riparian vegetation recovery can be tentatively predicted. The actual impacts of the restoration strategy are less than those originally expected politically, socially and within the scientific community. We make recommendations on more effective release strategies.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

钙基磁性生物炭对Cr（VI）污染土壤钝化稳定化机制及微生物影响研究

生物炭改性材料因具有活性官能团众多、吸附效能高等优势被广泛应用于土壤重金属污染修复治理中.本研究以稻谷壳为原料,采用 共沉淀法及CaCO₃浸渍法制备了钙基磁性生物炭（Ca-Fe-B）,并使用电子扫描显微镜（SEM）、傅里叶红外光谱（FTIR）、X射线衍射分析（XRD）、X射线光电子能谱分析（XPS）进行表征.同时,通过梯度浓度Cr（VI）污染土壤实验考察Ca-Fe-B施入对土壤pH、Cr（VI）稳定化效果、土壤酶活性及微生物群落结构的影响,并阐述其钝化机理.结果表明：①Ca-Fe-B表面负载Fe₃O₄、γ-Fe₂O₃、Fe₃C及以方解石形式存在的CaCO₃,具有大量—OH、—O—C=O、Si—O—Si、C≡C及C≡N等官能团;②Ca-Fe-B可显著提升土壤pH,在Cr（VI）污染浓度为100、200、1000 mg·kg^-1时,90 d的 固定效率分别可达72.57%、67.07%及59.88%,并使土壤中部分可交换态Cr转化为可还原态及残渣态Cr;③Ca-Fe-B可促进土壤β-葡萄糖苷酶与几丁质酶酶活性,但磷酸酶对其响应不显著,也可显著提升土壤中Proteobacteria门菌相对丰度;④Ca-Fe-B表面形成Si—O—Ca—OH键可吸附Cr（VI）, Fe（Ⅱ）作为电子供体参与土壤Cr（VI）还原过程,并生成Cr₂O₃、Cr（OH）₃沉淀及（Cr_xFe_1-x）（OH）₃、Cr_xFe_1-xOOH络合沉淀,以—OH、 —C=C—、O—C=O为主的大量含氧官能团协同吸附络合土壤中的Cr（VI）.研究显示, Ca-Fe-B对Cr（VI）污染土壤具有良好的稳定性能,有望为土壤重金属污染修复提供一种新的研究思路和技术路线.     

不同磁黄铁矿自养反硝化脱氮除磷作用

氮磷排放标准日趋严格,开发高效廉价脱氮除磷材料已成为研究热点.采用黄铁矿与赤铁矿在管式炉中氮气气氛下600 ℃煅烧,得到硫化赤铁矿形成的磁黄铁矿、黄铁矿热分解形成的磁黄铁矿,构建磁黄铁矿-方解石体系处理含氮磷模拟废水,对比不同方式制备的磁黄铁矿、天然磁黄铁矿、黄铁矿、硫磺脱氮除磷性能,考察不同磁黄铁矿晶体结构和结晶度差异及其对脱氮除磷影响,探究不同体系中矿物结构和微生物群落变化.结果表明：黄铁矿热分解产物以六方磁黄铁矿为主;硫化赤铁矿产物以低结晶度的单斜磁黄铁矿为主,因而表现出优异的脱氮除磷活性,氮磷去除率分别为99.8%和96.8%.铁硫化物与微生物反应产物的XRD、SEM和FE-TEM分析结果表明,微生物能有效利用磁黄铁矿进行脱氮,磷酸盐主要以FePO₄形式被去除.群落分析结果表明铁硫化物脱氮除磷体系中的主要功能菌属为Thiobacillus和 Sulfurimonas,结晶度低的单斜磁黄铁矿更有利于Thiobacillus定向富集.     

基于RuO2-IrO2/Ti和Fe0电极的电氧化-电絮凝处理含Tl废水

基于RuO₂-IrO₂/Ti形稳电极和Fe⁰牺牲电极实现电氧化-电絮凝(EO-EC)一体化处理含Tl (I)废水,并与单一的电絮凝(EC)进行比较,探讨了EO-EC处理含Tl废水的机理.结果表明,相较于单一EC,EO-EC (1:1)组合技术适应于宽pH (4-10)以及电流密度范围(5-20mA/cm²)下含Tl废水高效处理,且不易发生钝化;活性氯以及氧化还原电位在Tl (I)间接氧化Tl (III)过程中扮演重要角色,沉淀分析表明生成的Tl (OH)_3(s)与絮体Fe (OH)_3(am)共沉淀,纤铁矿位点可吸附残留Tl (I).EO-EC一体化技术可满足实际含Tl废水达标处理(<2µg/L)且具有经济可行性.     

燃料特性对铁矿石烧结及烟气排放的影响

采用烧结杯试验,从固体燃烧角度出发,探究燃料结构和粒度对燃烧前锋温度及烧结气氛变化的影响。结果表明:随着燃料中煤粉比例逐渐提高(0~100%),烧结速度提高至4.32 mm/min,利用系数提高至0.13 t/(m2·h);转鼓强度先上升后下降,当煤粉比例为25%时,转鼓指数达到最高(58.4%);烟气中NO_x浓度与CO成分分别提高28.34 mg/m3和0.72%,CO能促进NO的还原反应,抑制NO_x生成。全煤条件下,随着煤粉粒径<1 mm的质量分数由50%降低到10%,烟气中NO_x降低了51.33 mg/m3,提高燃料粒度可降低烟气NO_x排放浓度;而延长烧结时间,NO_x总排放量上升。研究结果可为烧结燃料选择及烟气减排提供参考。