进口废电器拆解残余固体废物中污染物的溶出试验研究

进口废电器拆解后的残余固体废物是一种碱性废物 ,2— 3年雨量范围内的模拟酸雨淋出液中的Cu和Zn的含量超过排放标准中的一级排放标准 ,而Ni、Pb、Hg的含量可以达标 ;在整个 10年试验雨量范围内 ,所有淋出液中CODCr和油的含量均超过一级排放标准 .酸性介质有利于Cu、Zn、Pb、Ni的释放 .碱性介质有利于油和CODCr的释放 .在各种淋溶介质条件下 ,主要污染因子的淋溶释放一般符合Ct=C0 ·tb 模型 .     

Fe(Ⅲ,Ⅱ)/H2O2体系中Fe(Ⅲ)水解特征的对比

利用Fe Ferron逐时络合比色法对类Fenton与Fenton体系中Fe(Ⅲ )水解形态的转化规律进行了比较 .结果表明 ,水解度越高 ,两体系中Fe(Ⅲ )的水解速度也越快 ,但水解度相同时 ,与Fenton体系相比 ,类Fenton反应生成的Fe(Ⅲ )的水解速率要低 ,且Feb 所占比例也较少 .与Fenton体系一致 ,类Fenton体系中的Fe(Ⅲ )水解速率随H2 O2 浓度的增加而减缓     

陇西立交枢纽生态绿化工程研究

在陇西立交枢纽的设计和施工工程中，以恢复和优化公路生态环境，提高行车的安全和舒适性为目的，把绿化和植被恢复作为一个重要因子进行全血考虑，使植物材料搭配，经过一年的实践已被见成效。     

UASB装置处理溶剂生产废醪液

本文介绍了采用ＵＡＳＢ装置处理发酵法溶剂生产的废醪液工艺过程．总结了在生产实践中遇到的问题，及解决问题的方法和工艺控制点的选择．说明用ＵＡＳＢ装置处理废醪液是一种很好的方法．     

Turnover mechanisms of organic conformation on turbidity in drinking water

The turbidity variation in artificial water and samples from a water plant was investigated in the presence of organics with different relative molecular mass. The results show that recessive turbidity existed when water chemical conditions were changing. The formation of turbidity depended on organic relative molecular mass and their conformations on particles. At higher pH and lower ionic strength, the organic chains with a more extended conformation resulted in rising turbidity of the suspension. At lower pH, the reconformation of organics took place due to charge neutralization by the proton, resulting in a decline in turbidity. The addition of NaCl and MgCl₂ at pH 7.00 also resulted in a decrease of turbidity in the suspension. It is believed that the occurrence of recessive turbidity has a significant influence on the stability of water supply quality.     

提高化学需氧量质控合格率的研究

大庆油田化工总厂废水中化学需氧量（COD）的测定采用库仑法。为了提高质控合格率，从人员素质、仪器设备、电级内液等9个方面分析寻找导致误差的主要影响因素并制定对策。同时对影响电极内液及消解的因素进行正交实验确定最佳条件。结果使库仑法质控合格率由90％提高到95％，测定38次标样全部合格。     

淮河上游洪水灾害可公度信息系预测

可公度信息系是一种源于天文学的预测方法，其实质是寻求事物发生的经验关系。本文应用此法对淮河上游的洪水灾害进行了预测分析，结果表明淮河上游洪水灾害发生具有２ａ、４ａ、５ａ、７ａ、９ａ、１１ａ、１９ａ及７１ａ等多种周期，并在１９９７年、２０００年等年份的前后有可能发生大洪水。     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Influence of coagulation mechanisms and floc formation on filterability

Minimizing particles in water is a key goal for improving drinking water quality and safety.The media filtration process,as the last step of the solid–liquid separation process,is largely influenced by the characteristics of flocs,which are formed and controlled within the coagulation process.In a laboratory-based study,the impacts of the physical characteristics of flocs formed using aluminum sulfate on the filtration treatment of two comparative water samples were investigated using a photometric dispersion analyzer and a filterability apparatus.In general,the optimum dosage for maximizing filterability was higher than that for minimizing turbidity under neutral p H conditions.For a monomeric aluminum-based coagulant,the charge neutralization mechanism produced better floc characteristics,including floc growth speed and size,than the sweep flocculation mechanism.In addition,the charge neutralization mechanism showed better performance compared to sweep flocculation in terms of DOC removal and floc filterability improvement for both waters,and showed superiority in turbidity removal only when the raw water had high turbidity.For the different mechanisms,the ways that floc characteristics impacted on floc filterability also differed.The low variation in floc size distribution obtained under the charge neutralization mechanism resulted in the flocs being amenable to removal by filtration processes.For the sweep flocculation mechanism,increasing the floc size improved the settling ability of flocs,resulting in higher filter efficiency.