Octachlorodibenzo-p-dioxin in wood treatment materials and treated wood

The octachlorodibenzo-p-dioxin (OCDD) concentrations have been determined in aged samples of commercial pentachlorophenol (PCP), in wood protection formulations containing PCP and in wood treated with PCP as a preservative or as an anti-sapstain treatment. The concentrations of OCDD found in the various samples are within the range expected from the amount of commercial PCP initially present in the samples. In view of the known stability of OCDD the results are interpreted as indicating that the formulation, treatment and ageing processes have not led to any substantial conversion of PCP to OCDD; although one result indicates that outdoor exposure of treated samples increased the OCDD concentration by a factor of approximately 2 after $\text{3}\text{1}\text{2}$ years. Analysis of aged samples of treated wood indicate that OCDD is lost much less rapidly from the wood than PCP.     

Orographic enhancement of snowfall

Field studies have been conducted at a hill site in Scotland to measure the variation with altitude of wet deposition by snowfall. The results showed that, due to wind drift effects, snowflakes were captured very inefficiently by snow collectors. It was therefore not possible to measure an increase in precipitation with altitude. The average concentrations of principal ions dissolved in the snow water were calculated over a two-month period. The results showed that the concentrations increased by factors of between 1.4 and 1.9 with an altitude rise of 400 m. A model of the orographic enhancement of snowfall by the seeder-feeder effect showed that the orographic enhancements of precipitation and pollutant deposition were significantly greater for snowfall than for rainfall. The wind drift of snow crystals and the evaporation of precipitation in dry valley air were important in determining the patterns of deposition.     

Valuing biodiversity: reality or mirage?

The objective of this paper was to consider the social value ofbiological diversity and explore if this value could be expressedin terms of a unidimensional metric in money. Economics distinguishes between use-values and non-use-values, which are critically evaluated for valuing biodiversity. It is shown that these utility-based valuations have severe limitations as they treat species in isolation from their ecological contexts. In contrast, ecosystem ecology regards ecosystems as an integratednon-linear and nonconvex system in which ecosystem functions canbe understood as a four-component cycle; exploitation, accumulation of biomass, creative destruction and renewal. Withinsuch a cycle, ecosystems can be seen to have two properties: stability and resilience. A good proxy for resilience is the probability of extinction of species, and social value of biodiversity can be expressed as a partial ordering with thisprobability as an index. This approach is consistent with decision theory, of which social choice is an important component, pioneered by Arrow.     

Who's afraid of zoning?

Changes to the British Planning System aimed at simplification of controls have introduced the concept of zoning. Far from being a limited and rigid concept, the Australian approach to zoning offers some interesting possibilities because of its balance between flexibility and certainty. The principal elements of an Australian zoning system are described and discussed to demonstrate the opportunities available to planners adjusting to changing political and economic climates. It is shown that it is possible to combine strategic planning with greater certainty in development control.     

Predictions of U.K. regulated power station contributions to regional air pollution and deposition: a model comparison exercise

Contributions of the emissions from a U.K. regulated fossil-fuel power station to regional air pollution and deposition are estimated using four air quality modeling systems for the year 2003. The modeling systems vary in complexity and emphasis in the way they treat atmospheric and chemical processes, and include the Community Multiscale Air Quality (CMAQ) modeling system in its versions 4.6 and 4.7, a nested modeling system that combines long- and short-range impacts (referred to as TRACK-ADMS [Trajectory Model with Atmospheric Chemical Kinetics-Atmospheric Dispersion Modelling System]), and the Fine Resolution Atmospheric Multi-pollutant Exchange (FRAME) model. An evaluation of the baseline calculations against U.K. monitoring network data is performed. The CMAQ modeling system version 4.6 data set is selected as the reference data set for the model footprint comparison. The annual mean air concentration and total deposition footprints are summarized for each modeling system. The footprints of the power station emissions can account for a significant fraction of the local impacts for some species (e.g., more than 50% for SO2 air concentration and non-sea-salt sulfur deposition close to the source) for 2003. The spatial correlation and the coefficient of variation of the root mean square error (CVRMSE) are calculated between each model footprint and that calculated by the CMAQ modeling system version 4.6. The correlation coefficient quantifies model agreement in terms of spatial patterns, and the CVRMSE measures the magnitude of the difference between model footprints. Possible reasons for the differences between model results are discussed. Finally, implications and recommendations for the regulatory assessment of the impact of major industrial sources using regional air quality modeling systems are discussed in the light of results from this case study.     

Evaluation of a CMAQ simulation at high resolution over the UK for the calendar year 2003

A comprehensive ‘operational’ evaluation of the performance of the Community Multiscale Air Quality (CMAQ) modelling system version 4.6 was conducted in support of pollution assessment in the UK for the calendar year 2003. The model was run on multiple grids using one-way nests down to a horizontal resolution as fine as 5 km over the whole of the UK. The model performance was evaluated for pollutants with standards and limit values (e.g. O₃, PM₁₀) and species contributing to acidic and nitrogenous deposition (e.g. NH₃, SO₄^2–, NO₃^–, NH₄⁺) against data from operational national monitoring networks. The key performance characteristics of the modelling system were found to be variable according to acceptance criteria and to depend on the type (e.g. urban, rural) and location of the sites, as well as on the time of the year. As regards the techniques that were used for ‘operational’ evaluation, performance generally complied with expected levels and ranged from good (e.g. O₃, SO₄^2–) to moderate (e.g. PM₁₀, NO₃^–). At a few sites low correlations and large standard deviations for some species (e.g. SO₂) suggest that these sites are subject to local factors (e.g. topography, emission sources) that are not well described in the model. Overall, the model tends to over predict O₃ and under predict aerosol species (except SO₄^2–). Discrepancies between predicted and observed concentrations may be due to a variety of intertwined factors, which include inaccuracies in meteorological predictions, chemical boundary conditions, temporal variability in emissions, and uncertainties in the treatment of gas and aerosol chemistry. Further work is thus required to investigate the respective contributions of such factors on the predicted concentrations.     

Analysis of polychlorobiphenyls from used transformers for polychlorodibenzofurans

The results of analyses for polychlorodibenzofuran (PCDF) content in two samples of polychlorobiphenyl (PCB) from used electrical transformers are presented and discussed. In neither sample was there evidence for enhanced PCDF concentrations even though one of them had been subjected to overheating while in service.     

Polychlorodibenzo-p-dioxins and dibenzofurans in technical pentachlorophenol - results of a collaborative analytical exercise

Results of analyses of eight samples of technical pentachlorophenol conducted by three different analytical methods are presented and discussed.     

Evaluation of vacuum and wet-wipe methods for removal of World Trade Center dust from indoor environments

The destruction of the buildings at the World Trade Center (WTC) complex dispersed dust and debris into the surrounding area. Pulverized building material made up most of the fallout and was intermixed with combustion byproducts of the aircraft and building contents. A study was conducted to confirm the effectiveness of several cleaning procedures in removing WTC-related contamination from lower Manhattan residences. The contaminants included asbestos, lead, dioxin/furans, synthetic vitreous fibers (fibrous glass), and crystalline silica. All cleaning procedures included the common elements of vacuuming and wet wiping with soap and water. This cleaning procedure combination is effective in reducing WTC-related contamination to below health-based benchmarks. Post-cleaning environmental test results suggested that airborne asbestos measurements can be used as a surrogate parameter in clearance determinations.