Assessment of geochemical modeling applications and research hot spots—a year in review

Environmental Geochemistry and Health - Geochemical modeling has been employed in several fields of science and engineering in recent years. This review seeks to provide an overview of case studies...     

Degradation and removal methods of antibiotics from aqueous matrices--a review

Over the past few years, antibiotics have been considered emerging pollutants due to their continuous input and persistence in the aquatic ecosystem even at low concentrations. They have been detected worldwide in environmental matrices, indicating their ineffective removal from water and wastewater using conventional treatment methods. To prevent this contamination, several processes to degrade/remove antibiotics have been studied. This review addresses the current state of knowledge concerning the input sources, occurrence and mainly the degradation and removal processes applied to a specific class of micropollutants, the antibiotics. In this paper, different remediation techniques were evaluated and compared, such as conventional techniques (biological processes, filtration, coagulation, flocculation and sedimentation), advanced oxidation processes (AOPs), adsorption, membrane processes and combined methods. In this study, it was found that ozonation, Fenton/photo-Fenton and semiconductor photocatalysis were the most tested methodologies. Combined processes seem to be the best solution for the treatment of effluents containing antibiotics, especially those using renewable energy and by-products materials.     

Morphological and statistical analysis of the impact of breakwaters under construction on a sand spit area (Douro River estuary)

The area of Cabedelo sand spit, located at the mouth of Douro River estuary (Porto, Portugal), reduced in recent decades. In order to study its evolution and also the impact of two breakwaters built to fix the river entrance, a dataset from 23 trimestral surveys using differential GPS techniques, conducted between 2001 and 2007, were considered. A time-series analysis and the estimation of relationships between Cabedelo spit area and several hydrodynamic parameters through statistical techniques were performed in order to determine which parameters have more influence in the Cabedelo spit behavior. From the time-series analysis a seasonal tendency is visible, with the lower values occurring in December and the higher values occurring in July. The estimation of a relationship between Cabedelo spit area and several independent variables reached better results when the dataset was divided in Part A (before the beginning of breakwaters construction) and Part B (during the breakwaters construction). An analysis of the morphological evolution of Cabedelo spit shoreline was also performed: (1) a simple analysis of retreat and accretion rates data with a geographical information system and (2) a more exhaustive analysis were performed using Empirical Orthogonal Functions (EOFs). The Cabedelo spit shoreline erosion occurs mostly on the West and North side, and the accretion mostly occurs in the area protected by the South breakwater. During the breakwater’s construction, the Cabedelo spit shoreline presented high retreat rates, with a mean value greater than 100 m. In terms of spatial variance (EOFs analysis), when the dataset was divided in two parts, the first Principal Component (PC) represents 60.10 % and 89.86 % of the mean squared value of the data, for Part A and Part B, respectively. As proved, the breakwaters would tend to stabilize the coastline leading to a higher first PC value after breakwaters construction (Part B).     

New aspect in seagrass acclimation: leaf mechanical properties vary spatially and seasonally in the temperate species Cymodocea nodosa Ucria (Ascherson)

Seagrasses may acclimate to environmental heterogeneity through phenotypic plasticity. In contrast to leaf morphology, which has been a central point in seagrass acclimation studies, plasticity in leaf biomechanics and fibre content is poorly understood, despite being crucial in plant ecological performance, especially regarding physical forces. We hypothesised that mechanical traits (e.g. breaking force, strength, toughness, and stiffness) and fibre content of seagrass leaves vary as morphology does under differential environments. Cymodocea nodosa was seasonally monitored at three locations around Cádiz Bay (southern Spain) with hydrodynamic regime as the most noticeable difference between them. Leaves showed plasticity in both morphology and mechanical traits, with wave-exposed individuals presenting short but extensible and tough leaves. Leaf fibre content was invariant along the year and with little spatial variability. Cross-sectional area rather than material properties or fibre content differentiates leaf mechanical resistance. Seagrass capacity to thrive under a range of mechanical forces may be dictated by their plasticity in morpho-biomechanical traits, a key element for the hydrodynamical performance and, hence, for species colonisation and distribution.     

Ecological niche segregation among five toothed whale species off the NW Iberian Peninsula using ecological tracers as multi-approach

This study aims to assess niche segregation among the five main toothed whales that frequent the NW Iberian Peninsula waters: the common dolphin, the harbour porpoise, the bottlenose dolphin, the striped dolphin and the long-finned pilot whale. We used cadmium (Cd) and stable isotope ratios (δ¹³C and δ¹⁵N) as ecological tracers to assess degree of segregation in diet/trophic level and in foraging habitat, over various time-scales. δ¹³C values highlighted different habitats, while Cd concentrations highlighted feeding differences between oceanic and neritic species. Moreover, δ¹⁵N values suggest different trophic levels of prey targeted within oceanic and neritic species. Hence, results revealed long-term ecological segregation among five toothed whales that coexist in the NWIP and demonstrated the ability of ecological tracers to discriminate ecological niches among closely related species.     

Comparison of four methods to estimate meiobenthic copepod Amonardia normani ingestion rates

Four different methods were used in the control conditions of laboratory to estimate the ingestion rate of a female meiobenthic harpacticoid copepod Amonardia normani: (1) reduction of algal biomass, (2) the quantification of total pigments in fecal pellets, (3) the gut fluorescence method, (4) the percentage of assimilation and the total egestion rate. The food used during all experiments was the diatom Nitzschia constricta in an axenic condition at the concentration of 0.13 μg Chl-a mL^?1 at stationary growth phase. All experiments were made at 20 °C and 30 salinity. All tested methods excepted the quantification of total pigments in fecal pellets resulted in similar estimatives. The gut fluorescence method indicated that during the day gut contents are smaller than during the night but the gut passage time was faster, resulting in similar ingestion rates during the day and the night. The reduction of algal biomass and the percentage of assimilation and the total egestion rate also indicated similar ingestion rates in the day and in the night. The daily ingestion rate represents 107 % of female carbon weight per day (903 ng C cop^?1day^?1).     

Radon in indoor concentrations and indoor concentrations of metal dust particles in museums and other public buildings

The aim of this study was to evaluate the public and occupational exposure to radon and metal-bearing particles in museums and public buildings located in the city of Rio de Janeiro, Brazil. For this study, four buildings were selected: two historic buildings, which currently house an art gallery and an art museum; and two modern buildings, a chapel and a club. Integrated radon concentration measurements were performed using passive radon detectors with solid state nuclear track detector-type Lexan used as nuclear track detector. Air samplers with a cyclone were used to collect the airborne particle samples that were analyzed by the particle-induced X-ray emission technique. The average unattached-radon concentrations in indoor air in the buildings were above 40 Bq/m³, with the exception of Building D as measured in 2009. The average radon concentrations in indoor air in the four buildings in 2009 were below the recommended reference level by World Health Organization (100 Bq/m³); however, in 2011, the average concentrations of radon in Buildings A and C were above this level, though lower than 300 Bq/m³. The average concentrations of unattached radon were lower than 148 Bq/m³ (4pCi/L), the USEPA level recommended to take action to reduce the concentrations of radon in indoor air. The unattached-radon average concentrations were also lower than the value recommended by the European Union for new houses. As the unattached-radon concentrations were below the international level recommended to take action to reduce the radon concentration in air, it was concluded that during the period of sampling, there was low risk to human health due to the inhalation of unattached radon in these four buildings.     

Some aspects of heavy metals contamination remediation and role of biosurfactants

Contamination by heavy metals is the result of different industrial activities. The presence of heavy metals in soil and water causes serious problems, as these materials are not biodegradable and do contaminate both biological systems and the subsoil. Biological surface-active compounds otherwise known as biosurfactants in general and rhamnolipids biosurfactants in particular have been successfully employed in the remediation of environments contaminated with heavy metal ions. The aim of the present review is to highlight potential applications of these tensioactive compounds for use in environmental heavy metals removal and bioremediation and processes involved.