Development of a rotorcraft dust-emission parameterization using a CFD model

Flights of rotorcraft over the desert floor can result in significant entrainment of particulate matter into the atmospheric boundary layer. Continuous or widespread operation can lead to local and regional impacts on visibility and air quality. To account for this pollutant source in air quality models, a parameterization scheme is needed that addresses the complex vertical distribution of dust ejected from the rotorcraft wake into the atmospheric surface layer. A method to parameterize the wind and turbulence fields and shear stress at the ground is proposed here utilizing computational fluid dynamics and a parameterized rotor model. Measurements taken from a full scale experiment of rotorcraft flight near the surface are compared to the simulation results in a qualitative manner. The simulation is shown to adequately predict the forward detachment length of the induced ground jet compared to the measured detachment lengths. However, the simulated ground vortex widths and vorticity deviate substantially from the measured values under a range of flight speeds. Results show that the method may be applicable for air quality modeling assuming slow airspeeds of the rotorcraft, with advance ratios of 0.005–0.02.     

A perfect storm? Indigenous rights within a national REDD+ readiness process in Peru

Recurring disagreements during national preparations to reduce emissions from deforestation and forest degradation (REDD+) are contributing to policy reform at multiple scales. The objectives of this study are to (i) develop a general framework to characterise diverse stakeholder perspectives on REDD+ programme objectives and governance arrangements, and (ii) apply this framework to analyse key stakeholders involved in REDD+ readiness process of Peru: the Inter-ethnic Association for the Development of the Peruvian Rainforest (Asociación Interétnica de Desarrollo de la Selva Peruana, AIDESEP), the Peruvian government and the World Bank. As indigenous peoples strive to maintain their own traditions and priorities, a turbulent readiness process is helping to resolve long-ignored issues of indigenous rights and to make REDD+ programme governance structures more inclusive. The Peruvian government/World Bank approach to REDD+ is incompatible with that of AIDESEP, therefore parallel implementation will be required for them to co-exist. Although a diversity of participants has helped to check and balance the centralization of decision-making power over REDD+ programme development, a history of failed assurances and agreements point to a need to maintain vigilance as new laws, regulations and safeguards are implemented.     

Measuring site-level success in brownfield redevelopments: a focus on sustainability and green building

This research has met the following four objectives within the broader research topic of characterizing and quantifying success in brownfield revitalization: (1) to define 40 total indicators that define and determine the success of brownfield redevelopments in four categories: environment-health, finance, livability, and social-economic; (2) to use these indicators to develop a partially automated tool that stakeholders in brownfield redevelopment may use to more easily assess and communicate success (or failures) in these projects; (3) to integrate "green" building as an important aspect of successful brownfield redevelopments; and (4) to develop this tool within the framework of a specific multi-attribute decision method (MADM), the analytical hierarchical process (AHP). Future research should include the operationalization and application of this tool to specific sites. Currently, no such indicator framework or automated tool is known to exist or be in use. Indicators were chosen because of their ability to reduce data into comprehensible measurements and to systematically measure success in a standardized fashion. Appropriate indicators were selected based on (1) interviews with prominent private developers and national leaders in brownfield redevelopment, (2) a review of the relevant literature, (3) objective hierarchies created in this project, and (4) the ability for each indicator to serve goals in more than one of the four categories described above. These were combined to form the Sustainable Brownfields Redevelopment (SBR) Tool. A survey was conducted to serve as a preliminary assessment and proposed methodology for judging the validity of the SBR Tool. Professionals in the academic, private, and public sector were asked to provide an evaluation of the management tool and a weighting of the relative importance of each indicator and each of the four categories listed previously. Experts rated the tool at 7.68 out of 10 suggesting that this framework will be useful in evaluating these redevelopments upon completion and in formulating initial site plans and building design.     

Did the pre-1980 use of in-stream structures improve streams? A reanalysis of historical data.

In the 1930s, after only three years of scientific investigation at the University of Michigan Institute for Fisheries Research, cheap labor and government-sponsored conservation projects spearheaded by the Civilian Conservation Corps allowed the widespread adoption of in-stream structures throughout the United States. From the 1940s through the 1970s, designs of in-stream structures remained essentially unchanged, and their use continued. Despite a large investment in the construction of in-stream structures over these four decades, very few studies were undertaken to evaluate the impacts of the structures on the channel and its aquatic populations. The studies that were undertaken to evaluate the impact of the structures were often flawed. The use of habitat structures became an "accepted practice," however, and early evaluation studies were used as proof that the structures were beneficial to aquatic organisms. A review of the literature reveals that, despite published claims to the contrary, little evidence of the successful use of in-stream structures to improve fish populations exists prior to 1980. A total of 79 publications were checked, and 215 statistical analyses were performed. Only seven analyses provide evidence for a benefit of structures on fish populations, and five of these analyses are suspect because data were misclassified by the original authors. Many of the changes in population measures reported in early publications appear to result from changes in fishing pressure that often accompanied channel modifications. Modern evaluations of channel-restoration projects must consider the influence of fishing pressure to ensure that efforts to improve fish habitat achieve the benefits intended. My statistical results show that the traditional use of in-stream structures for channel restoration design does not ensure demonstrable benefits for fish communities, and their ability to increase fish populations should not be presumed.     

Applied tracer tests in fractured rock: Can we predict natural gradient solute transport more accurately than fracture and matrix parameters?

Applied tracer tests provide a means to estimate aquifer parameters in fractured rock. The traditional approach to analysing these tests has been using a single fracture model to find the parameter values that generate the best fit to the measured breakthrough curve. In many cases, the ultimate aim is to predict solute transport under the natural gradient. Usually, no confidence limits are placed on parameter values and the impact of parameter errors on predictions of solute transport is not discussed. The assumption inherent in this approach is that the parameters determined under forced conditions will enable prediction of solute transport under the natural gradient. This paper considers the parameter and prediction uncertainty that might arise from analysis of breakthrough curves obtained from forced gradient applied tracer tests. By adding noise to an exact solution for transport in a single fracture in a porous matrix we create multiple realisations of an initial breakthrough curve. A least squares fitting routine is used to obtain a fit to each realisation, yielding a range of parameter values rather than a single set of absolute values. The suite of parameters is then used to make predictions of solute transport under lower hydraulic gradients and the uncertainty of estimated parameters and subsequent predictions of solute transport is compared. The results of this study show that predictions of breakthrough curve characteristics (first inflection point time, peak arrival time and peak concentration) for groundwater flow speeds with orders of magnitude smaller than that at which a test is conducted can sometimes be determined even more accurately than the fracture and matrix parameters.     

Radioactivity in trinitite six decades later

The first nuclear explosion test, named the Trinity test, was conducted on July 16, 1945 near Alamogordo, New Mexico. In the tremendous heat of the explosion, the radioactive debris fused with the local soil into a glassy material named Trinitite. Selected Trinitite samples from ground zero (GZ) of the test site were investigated in detail for radioactivity. The techniques used included alpha spectrometry, high-efficiency gamma-ray spectrometry, and low-background beta counting, following the radiochemistry for selected radionuclides. Specific activities were determined for fission products (90Sr, 137Cs), activation products (60Co, 133Ba, 152Eu, 154Eu, 238Pu, 241Pu), and the remnants of the nuclear fuel (239Pu, 240Pu). Additionally, specific activities of three natural radionuclides (40K, 232Th, 238U) and their progeny were measured. The determined specific activities of radionuclides and their relationships are interpreted in the context of the fission process, chemical behavior of the elements, as well as the nuclear explosion phenomenology.     

Protection from steam at high pressures: development of a test device and protocol.

Extensive use of pressurized steam in the oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed and evaluated. Several factors were considered while designing the test device to simulate work site conditions. Fabrics were exposed to steam at 2 distances (50 and 100 mm) and 2 pressures (207 and 69 kPa). Theoretical considerations included heat and mass transfer, and fabric structure and performance properties. The test device and procedure differentiated well among both fabrics and exposure conditions. For all fabrics, maximum heat transfer was observed at highest steam pressure and shortest distance. Laminated and coated fabrics performed better than a fabric without such treatments.     

Dental fluorosis linked to degassing of Ambrym volcano, Vanuatu: a novel exposure pathway

Ambrym in Vanuatu is a persistently degassing island volcano whose inhabitants harvest rainwater for their potable water needs. The findings from this study indicate that dental fluorosis is prevalent in the population due to fluoride contamination of rainwater by the volcanic plume. A dental survey was undertaken of 835 children aged 6–18 years using the Dean’s Index of Fluorosis. Prevalence of dental fluorosis was found to be 96% in the target area of West Ambrym, 71% in North Ambrym, and 61% in Southeast Ambrym. This spatial distribution appears to reflect the prevailing winds and rainfall patterns on the island. Severe cases were predominantly in West Ambrym, the most arid part of the island, and the most commonly affected by the volcanic plume. Over 50 km downwind, on a portion of Malakula Island, the dental fluorosis prevalence was 85%, with 36% prevalence on Tongoa Island, an area rarely affected by volcanic emissions. Drinking water samples from West Ambrym contained fluoride levels from 0.7 to 9.5 ppm F (average 4.2 ppm F, n = 158) with 99% exceeding the recommended concentration of 1.0 ppm F. The pathway of fluoride-enriched rainwater impacting upon human health as identified in this study has not previously been recognised in the aetiology of fluorosis. This is an important consideration for populations in the vicinity of degassing volcanoes, particularly where rainwater comprises the primary potable water supply for humans or animals.