Biodegradation of Low Molecular Weight Organic Acids in a Limed Forest Soil

The effect of liming (3.45 and 8.75 t ha^-1 dolomite; 16 yr after application) on the biodegradation of three low molecular weight organic acids (citrate, oxalate and propionate) in forest soils was investigated. The concentration of organic acids in the soil solution followed the series propionate > citrate > oxalate with liming having no significant impact on soil solution concentrations (mean organic acid concentration = 8.7 ± 2.3 M). Organic acid mineralization by the soil microbial community was rapid in surface organic horizons (mean half-life for citrate = 2–6 h), with biodegradation rate gradually declining with soil depth. Concentration-dependent biodegradation studies (0 to 350 M) showed that the mineralization kinetics generally conformed well to a single Michaelis–Menten equation with V_max values following the series oxalate > citrate > propionate (mean = 9.8 ± 1.0 nmol g^-1 h^-1) and K_M values following the series oxalate = citrate > propionate (mean 168 ± 25 M). The V_max values declined with soil depth, which was consistent with a general reduction in microbial activity down the soil profile. Liming induced a significant increase in V_max for citrate with no change for propionate and reduction in V_max for oxalate. The latter was probably due to adsorption and precipitation of Ca-oxalate making it unavailable for microbial uptake. The higher adsorption/precipitation capacity for oxalate in the limed soils was confirmed by adsorption isotherms. Generally, liming increased soil microbial activity by approximately 10 to 35% with calculations based on soil solution concentrations indicating that organic acid mineralization constituted approximately 3 to 15% of the total soil respiration.     

GENERALIZED WATERSHED LOADING FUNCTIONS FOR STREAM FLOW NUTRIENTS1

ABSTRACT: Loading functions are proposed as a general model for estimating monthly nitrogen and phosphorus fluxes in stream flow. The functions have a simple mathematical structure, describe a wide range of rural and urban nonpoint sources, and couple surface runoff and ground water discharge. Rural runoff loads are computed from daily runoff and erosion and monthly sediment yield calculations. Urban runoff loads are based on daily nutrient accumulation rates and exponential wash off functions. Ground water discharge is determined by lumped parameter unsaturated and saturated zone soil moisture balances. Default values for model chemical parameters were estimated from literature values. Validation studies over a three-year period for an 850 km² watershed showed that the loading functions explained at least 90 percent of the observed monthly variation in dissolved and total nitrogen and phosphorus fluxes in stream flow. Errors in model predictions of mean monthly fluxes were: dissolved phosphorus - 4 percent; total phosphorus - 2 percent; dissolved nitrogen - 18 percent; and total nitrogen - 28 percent. These results were obtained without model calibration.     

Source profiles for industrial, mobile, and area sources in the Big Bend Regional Aerosol Visibility and Observational study

Representative PM2.5 and PM10 source emissions were sampled in Texas during the Big Bend Regional Aerosol Visibility and Observa (BRAVO) study. Chemical source profiles for elements, ions, and carbon fractions of 145 samples are reported for paved and unpaved road dust, soil dust, motor vehicle exhaust, vegetative burning, four coal-fired power stations, an oil refinery catalytic cracker, two cement kilns, and residential meat cooking. Several samples were taken from each emitter and source type, and these were averaged by source type, and in source subgroups based on commonality of chemical composition. The standard deviation represents the variability of the chemical mass fractions. BRAVO profiles differed in some respects from profiles measured elsewhere. High calcium abundances in geological dust, high selenium abundances in coal-fired power stations, and high antimony abundances in oil refinery catalytic cracker emissions were found. Abundances of eight thermally evolved carbon fractions [Atmos. Environ. 28 (15) (1994) 2493] differ among combustion sources, and a Monte Carlo simulation demonstrates that these differences are sufficient to differentiate among several carbon-emitters.     

Tetrabromobisphenol A (TBBPA) and hexabromocyclododecanes (HBCDs) in tissues of humans, dolphins, and sharks from the United States

Concentrations of tetrabromobisphenol A (TBBPA) and alpha-, beta-, and gamma-isomers of hexabromocyclododecanes (HBCDs) were determined by liquid chromatography-tandem mass spectrometry (LC-ESI-MS/MS) in human adipose tissue obtained in New York City, and in three marine top-level predators--bottlenose dolphin, bull shark, and Atlantic sharpnose shark--collected from coastal waters of Florida, USA. The overall mean concentrations (mean+/-SD) of TBBPA and HBCDs were 0.048+/-0.102 and 0.333+/-0.571 ng/g lipid wt in human adipose tissue samples, 1.2+/-3 and 7.38+/-18 ng/g lipid wt in bottlenose dolphin blubber, 9.5+/-12 and 77.7+/-128 ng/g lipid wt in bull shark muscle, and 0.872+/-0.5 and 54.5+/-88 ng/g lipid wt in Atlantic sharpnose shark muscle. Overall mean concentrations of HBCDs were 5-10-fold higher than mean TBBPA concentrations, in all of the samples analyzed. The highest concentrations of TBBPA and HBCDs were detected in the bull shark muscle at concentrations of 35.6 and 413 ng/g, lipid wt, respectively. Concentrations of TBBPA and HBCDs, after log-transformation, were significantly correlated with each other in human adipose tissue and bottlenose dolphin blubber, but not in bull shark muscle samples. In the human adipose tissue samples, the concentrations of HBCDs were 3-4 orders of magnitude lower than the concentrations of polybrominated diphenyl ethers (PBDEs) previously reported for the same set of tissue samples. Concentrations of HBCDs in human samples from the United States were 1-5-fold lower than the concentrations reported from several European countries. HBCD concentrations in bottlenose dolphins from the United States were 1-2 orders of magnitude lower than the concentrations reported for other cetacean species from Europe. The present report is the first to determine levels of TBBPA and HBCDs in humans, bottlenose dolphins, and sharks from the United States.     

Assessment of frequent cutting as a plant-community management technique in power-line corridors

Repeated cutting of vegetation at or near ground level in power-line corridors is a common practice for inhibiting tree growth and regeneration. However, few data exist on long-term community responses. In this study, we sampled 20 northern Kentucky power-line corridors and compared their seedling and sapling communities to the edges and interiors of adjacent undisturbed forests. Mean seedling and sapling density in corridors was roughly twice that of adjacent undisturbed forest interiors, suggesting that repeated cutting is not a viable method of inhibiting tree regeneration. Corridor communities were dominated byRobinia pseudoacacia (black locust) andFraxinus americana (white ash), but ordinations indicated strong similaritties among communities in corridors and adjacent forests. Many of the tree species found in adjacent forests, with the exception of a few shade-tolerant species, had highest seedling and sapling densities in corridors. Stump or root sprouting by many species appears to regenerate forests quickly after cutting. However, disturbed soil and detritus accumulations caused by management crews and their equipment may also create a large variety of microsites for seedling establishment. Because repeated cutting selects for dominance by species with highest sprout growth rates, it should not be used as the sole management technique. It may instead be used to alter the vigor, stature, and stored reserves of trees so that herbicides or other methods of tree control can be used more efficiently.     

Pilot plant/full scale EP system design and performance on a BOF application

An ESP pilot plant study was done on emissions from a BOF process which is cyclic with very high and low gas volumes, temperature and grain loadings. Data collected were EP performance vs. gas velocity, and collection area. Also measured was particle size distribution, dust resi opacity at the EP outlet. From this data, a full size EP system was designed and installed. Recent performance tests indicate the data agrees well with the initial pilot plant study. Emissions have been reduced from 11 grs/scf (27.1 g/m³) to less than 0.033 grs/scf (81 mg/m³) and opacity to 20% or less.     

Early amniocentesis: A clinical review

Early amniocentesis at less than 14 weeks gestation is becoming more common in prenatal diagnosis populations. Randomized studies are minimal and have not had the power to determine the accuracy and safety of the procedure compared to chorionic villus sampling or mid-trimester amniocentesis. Procedures at 11⁺⁰-12⁺⁶ weeks should be considered experimental. This clinical review considers the ethics, embryology, and clinical experience (cytogenetics, AFP, AChE, procedure and cytogenetic failures, spontaneous and therapeutic pregnancy losses, congenital anomalies) of early amniocentesis.     

Partitioning and bioaccumulation of cadmium in artificial sediment systems: application of a stable isotope tracer technique

The utility of stable isotope tracers for investigating the relationship between cadmium (Cd) partitioning in artificial sediment-water systems and Cd accumulation in a benthic detritivore (Asellus racovitzai, Isopoda) was explored. In the laboratory, Cd isotopes were applied to synthetic sediment and isotope concentrations were measured in sediment, overlying water and exposed asellids over a 10-day period. Isotope ratios measured in sediment and water were compared to ratios measured in asellids to determine whether Cd partitioning could predict metal bioaccumulation. Two different parameters which might affect Cd partitioning between the sediment and overlying water compartments were investigated: the chemical form in which Cd was added to systems, and the organic matter content of the sediment. To test the effect of chemical form on Cd partitioning, three isotopes of cadmium were individually applied to formulated sediment in varying combinations of 113Cd(NO3)2, 112Cd-humic acid (HA) 114CdSO4. The results demonstrated that chemical form did not influence partitioning, as the Cd isotope that was applied to sediment in the nitrate form exhibited similar partitioning between sediment and overlying water as the isotope that was applied in the sulfate or HA form. However, Cd isotope concentrations in overlying water were strongly related to the pattern of isotope accumulation in asellids suggesting that overlying water concentrations determined Cd bioaccumulation. In contrast, when the organic matter content of sediment was increased through the addition of Sphagnum peat moss, total Cd concentrations in overlying water and tissue were low, and there was no relationship between Cd-isotope concentrations in tissue and water. These results indicate that Cd accumulation occurred primarily from water, and factors that increase metal partitioning to sediment, such as increased sediment organic matter content, decrease Cd accumulation in asellids. The stable isotope tracer method described herein appears to be a useful technique for investigating the relationship between metal partitioning and bioaccumulation in simple sediment systems, but could also be extended to more complex systems, and used with different metals that have multiple stable isotopes.